GOOD GARRETT AIRESEARCH HONEYWELL GAS TURBINE ENGINE BOEING 747 APU GTCP660-4 For Sale

These were Seizedassets fromEvergreen Airlines during their bankruptcy- Shipped anywhere land sea and air.

• Comes with 2 X AC 3phase 400HZ continuous duty cycle 160 amp generators.
• Comes with generator cooling ducts not shown.
• Comes with OEM APUshipping brackets and fully crated not shown.
• Comes with 2 x generator electrical Teflon wire and plug assemblies and same again for the starter motor plug assy that plugs into the aircraft which is not shown.
• I have a untouched OEM MRO lid sealed tagged andlock wire set and sealedoverhauled Allied SignalGarrett Airesearch HoneywellBoeing 747 GTCP660-4 APU engine control unit for this engine. So that’s all the brains it needs to run the APU as set OEM safe – it controls all the physically dangerous unforgivably scary stuff and all the overwhelmingly unaffordable unobtainable expensively financially unforgiving stuff…… luckily.
• Or I can order a used AR engine control suited for this engine for any buyer who would like that.
  

Any further inquiries to this APU andits official documents can be directed to the court of the United States ofAmerica using official document number 229-1 CASE 13-13364-MFW FILED 04/21/14

·MODEL NUMBER =GTCP660-4

·PART NUMBER =380716-1-3

·S/N: P37534

TOME SINCEOVERHAUL: UNKNOWN

·MATERIALCERTIFICATION NUMBER:30660

·AIRCRAFT TYPE =BOEING 747

·WEIGHTIMPERIAL= 585LBS

·WEIGHT METRIC = 265KG

·HORSE POWER = 3500HP

·COMPRESSED AIROUTPUT = 485 LB/MIN

·ELECTRICAL POWER =2 SEPARATE 60KVA 3 PHASE 400HZ CONTINUOUS DUTY CYCLE 120/208V AC ALLIED SIGNALAEROSPACE FAA PMA 747 ALL SERIES GENERATORS

·AMPS PERPHASE=166 AMPS

·NUMBER OF PHASES =6 PHASES

·TOTALKVAOUTPUT = 120KVA 3 PHASE CONTINUOUS DUTY 400HZ

·As the picturesshow through the exhaust the blades have the moment arm weight data which ishand written on each of the turbine blades which are easily visible through theexhaust end.

·

·Note it’s the sameguy who overhauled the other GTCP660-4 APU which is the OVERHAULED zerohours since overhaul engine we have listed because it’s the same hand writingand common sense and industry experience tells me or anyone else in the knowthat it is because there are not many of these uniquely, highly, skilled,extremely specialized guys per approved overhaul facultylike this,because they definitely don’t train and cycle through these types of staff likeMac Donald’s, the same guy who did the previous overhaul on this AR engine alsodid the overhaul on the GTCP660-4overhauled engine we currently have listed online as well, that’s a no brainer,operational eyes needed only.

WHY SO CHEAP = NO LOG BOOK OBVIOUSLY, EVERGREEN AIRLINES NEVER HANDEDTHEM OVER WHEN THEY WENT PAIR SHAPED, THEY VANISHED, NO ONE KNOWS A THING ABOUTWHERE THE HELL THEY WENT.

§IF IT DID HAVE ALOG BOOKS I WOULD NOT BE THE OWNER AND THIS WOULD NOT BE ON OBVIOUSLY ANDIT MOST LIKELY WOULD OFDONE ITS HOURS IN THE AIR BY NOW AND BE BACKGETTING PULLED APART AGAIN AND OVERHAULEDBY THE SAME GUY THEY CANTREPLACE WHO IS A \"ONE OFF\" JUST LIKE THIS 1 OFF CHANCEONLYOPPORTUNITY IN HISTORY.

WHO BUYS IT CAN DO WHAT THEY LIKEWITH IT real life past examples – ALL GROUND USE APPLICATIONS …………. subsonic,hyper-sonic and supersonic military missile and aircraft UAV and mannedaircraft wind tunnel wind generator, electrical power for several suburbs orsmall city, ground air and or electrical power for aircraft or special applicationsthat require huge unimaginable must be seen to be believed amounts ofelectrical power and compressed air suppliedsimultaneously at afeather weight the size of a mouse and mobile. Aviation maintenance collegesfor in hangarpressurization of airliner fuselages and aircraftpneumatic systems testing and training, universities, off shore or undergroundhorizontal drilling power sources, high speed gas dynamics technical trainingand research, aerospace training aids, research organizations,government proof of concept hydrogen fuel burning turbine energy generationdisplay, healthy boys toys for fun healthy boys, mobile rotor wingaircraftdeployed high energy land mineral and fossil fuel surveyingradar electrical power source.

• If anyone who is a non-time waster wants any specifics like special pictures or whatever – all non-time wasters are welcome just ask.

• So all it needs to run is an owner, YOU!And fuel and 2 x 12 Volt batteries with a few amps. Ear muffs and plugs, People to show off to spectators, etc.

Happily We insist, promote, support,welcome personal intimate inspection by anyone any time prior to purchasing -can be arranged 24 hours a day 7 days a week - located 15 minutes fromMelbourne international airport Victoria Australia. Don’t be afraid to Calltext or email and always remember real aerospace people are zero arrogance zeroattitude nice people.

US citizens get free entry into theUSA with zero duties, zero import taxes and tariffs etc., asthese comeunder a special class set out by the United States of AmericaDepartmentof homeland security.

“Return of America made goods” form3335 which is specifically for a aerospace components like this that are notenhanced, repaired or increased in value in any way shape or form from processor labour work carried out this end and additionally the USA and Australia havea free trade agreement-

We sort all that major soul draining stuff out like paperwork.

99.99999% of everything I’ve everdone that’s fun and worth doing, Italways eventually goes back to countryof origin with a new happy US owner in some way shape, form or another –

We can easilyhappily arrange Shipping air or sea to anyone anywhere anytime with ourshipping accounts or yours FedEx - DHL - UPS etc. or whoever you may wish.

Close PAYINGfriends with the USA TO AU – AU TO USA big-time SEA/AIR freight guy.

Making shippingzero nightmare for me and you.

Please clicksellers other items t these other I have

Callor email Paul for details anytime+61 473 491 820

[email removed by ]

·THE DETAILS OF ALLGAS TURBINE ENGINES BIG AND SMALL WE HAVE FOR SALE ARE IN A SIMPLELIST OF10 ENGINES AND BASIC DESCRIPTIONS BELOW.

·WE WILL GET EACH ONELISTED UP PROPERLY IN TIME SO PEOPLE KNOW WHAT THEIR LOOKING AT IN DETAIL ANDPRICING AND ALL THAT STUFF OK.

·IN THE MEAN TIME IFANYONE WANTS ANYTHING LIKE INFO OR PRICING ON ANYTHING ON THAT LIST BELOW YOULET US KNOW OK - LOOK AROUND AND YOU FIND OUR NUMBER AND MAIL PRETTY SOON.…THANKS

We currently havelisted below 10 once in a life time opportunity, \"too good to betrue\" aircraft gas turbine engines for sale at affordable down to earthprices. So healthy boys can now afford to play with \"High Value\"and \"High Fun value\" healthy boys toys.

AEROSPACE DYNAMICS AUSTRALIA

Call or email Paulfor details anytime+61 473 491 820

[email removed by ]

• 3 x solar T41M gas turbineengines which are Strategic Air Command SAC, U.S AIR FORCE T41-M-9 APU\'s From Boeing KC-135 inflight refuelling aircraft currently listed. All 3 APUS are complete with low hours since overhaul ranging from 233 - 71 hoursfrom overhaul and many across all 3 units have newly fittedlife limited critical parts (impellers, combustors, fuel control units, governors) components fitted by the USAF on all 3 units, all come with all accessories and each with its own AC 3 Phase 400 HZ Generator and DC starter motor, ready to run. Saw cut direct strait out from the USAF KC135 fuselage decommission. All critical controls have been lead tag sealed by the US Air force.

• 1 X Solar T41M gas turbine engine compressor generator, zero hours since new, brand new,frozen in time from 1956, unmolested by tomb raiders. Solar OEM display engine.

• 1 x fully overhauled, zero hours since fully overhaul, Allied Signal Garrett Airesearch Honeywell GTCP660-4 Boeing 747 gas turbine engine compressor generator auxiliary power unit APU complete. $1.6 million USD was just spent on the full overhaul carried out by Arizona Air Repair USA by Evergreen Airlines before thebankruptcy. Complete with all accessories, preserved and crated.

• 1 x as removed(AR) Allied Signal Garrett Airesearch Honeywell GTCP660-4 Boeing 747 gas turbine engine compressor generator auxiliary power unit APUcomplete with all accessories and crated- Removal carried by Jet Midwest USA.

• 1 x U.S AIR FORCE, NATO, ZERO HOURS SINCE NEW military cargo Star-lifter Aircraft Honeywell Garrett Airesearch GTCP85-106A gas turbine engine compressor power generator auxiliary power unit APUwith hydraulic starter motor. ( the star-lifter had a APU hydraulic start system that was energized by hydraulic accumulator, the mounting pad for the hydraulic starter motor on the APU is the same as all GTCP85 and GTC85 DC starter motorswhich is an easy swap over for anyone, we can source a starter motor for any buyer that wants that.

• 1 x U.S AIR FORCE Honeywell Garrett Airesearch GTCP85-102 NATO, Atlas, Minute man 1, thermonuclear payload warhead delivery ICBM launch silo faculty emergency power station, gas turbine engine back up electrical DC and AC aircraft generator, compressed air and hydraulic power source APU, 16 hours since full overhaul at T.E.A.D USA BY U.S MARINES CORPS. Lead tagged and sealed by U.S Marine Corps. Engine NSN 2835-116-8684,Model number: GTCP85-102 Part number: 378452-2 Series 3,
• 1 x U.S AIR FORCE Honeywell Garrett Airesearch GTCP85-102 NATO, Atlas, Minute man 1, thermonuclear payload warhead delivery ICBM launch silo faculty emergency power station, gas turbine engine back up electrical DC and AC aircraft generator, compressed air and hydraulic power source APU, 8.7 ( yep eight point seven) hours since full overhaul at T.E.A.D USA BY U.S MARINE CORPS. Start counter 273, every critical setting lead tagged and sealed by U.S Marine Corps. Gear Box NSN 2835-00-001-7723, Engine NSN 2835-116-8684, Serial number: 52P-13570 Model number: GTCP85-102 Part number: 378452-2 Series 3,

• 1 x U.S AIR FORCE LIGHT WEIGHT PARACHUTE DELIVERABLEMA1ASPECIAL USAF CONFIGURATION GAS TURBINE ENGINE HUFFER START CART Garrett Airesearch GTC85-70 complete and running like a dream in a special light weight made unit made from aircraft aluminium U.S Air Force military ground air start cart configuration, complete with all accessories like serviceable high temperature Bleed air hose, mechanical metal swivel joint nozzle, 150 foot long cable with remote engine control box and bleed air control foot pedal switch, all critical adjustments Lead tag sealed by USAF, Kelly Air force Base Texas USA who looked after this special baby right up until I took ownership of it. 292 hours since overhaul on clock, comes with spare working electrics, igniter/exciter box, engine control box, hour meter timer box with 40 hours rolled over, brackets, plugs and wiring, oil pressure switch, instrument control panel with some gauges. Fire wall ID Tag Serial number: 77P3296, Model number: GTC85-70, Part number: 376660-0-1. ID tag on chassis vertical engine mount beam: Part number: 375433, Series 2, Model number:GTCE85-15-1

Please click“see other items” to view our other listings

Call or email Paulfor details anytime+61 473 491 820

[email removed by ]

Formally\"aerodynamics2006\" (1077) 100% Positive response for the last 18years. Member since: 29-Apr-06 in Australia. Famous globally: With a uniqueimpeccable response history of hard work across the whole planet for building,selling, supplying information regarding scientific, medical, industriallasers, aircraft gas turbine engines, PRC laser high power industrial fastaxial flow Co2 turbine compressor overhauls, repairs and sales, and PRC laserHigh Voltage power supply overhaul sales testing and support, please ask me formy response list: here is a direct cut n paste snippet from my response historyof 3 of over a 1000 happy customers…...\"he knows hisstuff PRC LASER TURBO FLOW COMPRESSOR Turbine REBUILDS, REPAIRS, SALES,Worldwide. (#173112978945 ) US $7,000.00 zedindustries (1398)\"-\"Internationalshipment was early and hassle free SKF OIL INJECTION KIT SKF-729101-300-MPA NEWUNUSED COMPLETE KIT HYDRAULIC PRESS(#173131406727) AU $1,900.00jtheriot85 (100)\" -\"Thanks Paul hope you can help me again soonCOHERENT KRYPTON ION ARGON ENTERPRISE II LASER SYSTEM #260699097185) US$4,200.00 6321theron (1255)\"

WORLDWIDE CUSTOMER REFERENCE LIST FOR AEROSPACE DYNAMICS,FOR PRC LASERTURBINE COMPRESSOR AND HIGH VOLTAGE POWER SUPPLY OVERHAULS, REPAIRS, CHANGEOVER’S, TESTING, SALES, SERVICE AND TECH SUPPORT

UNITED STATES GOVERNMENT

Head Physicist / LSO: Joshua Hadler CLSO

Applied Physics Division (686)

NIST LABORATORY UNITED STATES [email removed by ]

ph: [phone removed by ]

fx:[phone removed by ]

US GOVERNMENT NIST LABORATORY

325 Broadway St. M.S. 686.00

Boulder, COLORADO 80305

UNITED STATES OF AMERICA

Attn: Mary Gorman

Wright, Sue (Fed) [email removed by ]

Gorman, Mary (Fed) [email removed by ]

U.S GOVERNEMNT NIST LABORATORY

Kyle Rogers

Lead Mechanicalengineer

Lead Calibration

U.S GOVERNEMNT NIST LABORATORY

National Institute for Standards and Technology

325 Broadway

Boulder, CO 80305

[phone removed by ]

[email removed by ]

NASA

JET PROPULSION LAB

Address: 4800 Oak Grove Dr, Pasadena, CA 91109, United States

P: [phone removed by ]

F: [phone removed by ]

Federal Laboratory Consortium

111 West Jackson Blvd.

Suite 1412

Chicago, IL 60604

Phone: +1-847-686-2298

Email: [email removed by

U.S AIR FORCE

Dept. of Defence U.S GOVERNMENT

USAF AFTC, AIR FORCE TEST CENTER

307 E. Popson Avenue

Edwards AFB, CA 92354-6842

United States

Laboratory Representative: Douglas Hoffelt

AFTC ORTA

E: [email removed by ]

P: [phone removed by ]

F: [phone removed by ]

K and S services

MSPR-LLC

Servo drive overhaul, servo motor,

Electro hydraulic servo valve

Overhaul specialists.

Electrical hydro mechanical repair

And testing Remanufacturing.

Hanh Do,[email removed by ]

John Fleming, [email removed by ]

1608 JohnPapalas Drive

Lincoln Park,Michigan48146

[phone removed by ] UNITED STATES

MURPHY LASER SERVICES

MARC MURPHY

GLOBAL SENIOR ELECTRONICS ENGINEER

OEM PRC LASER CORP USA,

LASER SERVICE TECHNICIAN/TRAINING/

PH: 973 229 9754

BANGOR PN UNITED STATES

PM PACKAGING MEXICO

Address: Producción 17, Mesa de Otay, 22435 Tijuana, B.C., Mexico

Phone: +52 664 624 0320

Marco Vazquez

[email removed by ]

Vermont Plastic Specialties Inc.

209 Blair Park Rd,

Williston, Vermont 05495, United States

Phone: +1 802-879-0072

802879639-2043

Mike -shop manager

Joseph- financial controller

[email removed by ]

R.E.D. Industries, Inc.

671 E. 9 Mile Rd.Hazel Park,

MICHIGAN 48030-1957. UNITED STATES

CONTACT NAME: PAMELA MATHEWS (president)

EMAIL: [email removed by ]

CONTACT NAME: DAVID MATHEWS: PHONE CELL: [phone removed by ]

EMAIL: [email removed by ]Office [phone removed by]

Precision Fab Inc. (PFI)

Address: 259 Elm St, Aylmer, ON N5H 3H3, Ontario Canada

Phone: +1 519-773-5244

Henry Bergen IV

t. [phone removed by ]

c. [phone removed by ]

[link removed by ]

Henry Bergen IV

[email removed by ]

HK Laser & Systems

Kevin Puumala

Service Manager

1296 Humbracht Circle

Bartlett, UNITED STATES

Office: [phone removed by ]

Mobile: [phone removed by ]

PFI USA Engineered Solutions

5963 Jaysville-St Johns Road

Greenville, Ohio, 45331 UNITED STATES

PFI USA ENGINEERED SOLUTIONS

5963 JAYSVILLE, ST JOHNS ROAD GREENVILLE,

OHIO, 45331, UNITED STATES OF AMERICA

CONTACT NAME: David Rabel

CONTACT PH: [phone removed by ] EMAIL: [email removed by ]

LASER TECH NEW YORK

Address: 3212 U.S. 9, Cold Springs,

NEW YORK 10516, United States

Phone: +1 845-265-5540

Vice President: John baby Varvara

[email removed by ]

[phone removed by ] office

[phone removed by ] fax

Precision Mounting Technologies Ltd.

515 58th Ave SE, Calgary, AB

T2H 0P7

Phone

Call us toll free: [phone removed by ]

Within Calgary: [phone removed by ]

[email removed by ]

Artios DieS

Tijuana B.C. Mexico

+52(664)285 6213

Nicolas Gonzalez Owner/president

[email removed by ]

English/Mexican Translator/ friend for Nick

Anntonio Soberanes <[email removed by ]>

HBI Services Inc.

Director of Manufacturing

Rick Nacke <[email removed by ]

P.O. Box 4609, Tulsa, OK 74159 UNITED STATES

1313 S. Lewis, Tulsa, OK 74104 UNITED STATES

(918) 665.8220 | FAX: (918) 665.8225| Cell :( 918) 269.0726

WWW.HBISERV.COM

HBI Services Inc.

Jason Foster,

HBI internal Maintenance training, Programming and Planning

P.O. Box 4609, Tulsa, OK 74159 UNITED STATES

1313 S. Lewis, Tulsa, OK 74104 UNITED STATES

(918) 665.8220 | FAX: (918) 665.8225| Cell:( 918) 269.0726

Hasty-Bake Headquarters,

Tulsa Grill Store & Grill Manufacturing Facility

Richard AlexanderPRESIDENT/OWNER

[Email removed by ]

1313 S. Lewis Tulsa, OKLAHOMA 74104 UNITED STATES

Toll Free: 800-4AN OVEN or [phone removed by ]

Phone: [phone removed by ]

Fax: [phone removed by ] 313 S. Lewis, Ave. Tulsa,

Oklahoma 74159 UNITED STATES

Phone: [phone removed by ]

ADAMS TECHNOLOGIES

Ellen Adams PRESIDENT/OWNER DIRECTOR.

[email removed by ]

SDS/AdamsTech

6235 Lookout Road, Suite A

Boulder, COLARADO 80301 UNITED STATES

[phone removed by ] Service: [phone removed by ]

Laura Venegas Adams Technologies

Cel y What’s app [phone removed by ] (USA)

E-Mail:[email removed by ][link removed by ]

PRC laser technician for Adams tech[email removed by]

Servicios Calados y Mas S de RL de CV

ADAMS TECH PRC LASER TECHNICIANS in Mexico FOR turbines and powersupplies,

León Cavallo 263 Colonia Vallejo Delegación Gustavo a Madero

México D.F. C.P. 070870R.F.C. SCM080606F54

[email removed by ]otify: PG Servicios Aduanales, S.C.

Montecito 38, piso 25, oficina 28, Col. Napoles.

Tel: 01(55) 5488 0094 Angelica Jimenez [email removed by ]SofiaGonzález[email removed by ]

ArtiFlex Manufacturing | ITS Division Automotive stamping plant line

Scott Wyckoff | Technology & Continuous Improvement Specialist

Grand Rapids 731 Broadway Ave

Grand Rapids, MICHIGAN 49504 UNITED STATES

P: [phone removed by ]

F: [phone removed by ]

Zed Industries, Inc.

P.O. Box 4583580 Lightner Road

Vandalia, OHIO 45377 UNITED STATES

Owner/President: Peter Zelnick

Email: [email removed by ]>

Phone: [phone removed by ]

Fax: [phone removed by ]

Pacific Die Services Inc.

7626 Baldwin Place Whittier, CALIFORNIA 90602 UNITED STATES

Rick SynadinosPRESIDENT/OWNER

Web:[link removed by ]

Rick Synadinos Email: [email removed by ]

[phone removed by ] land line

[phone removed by ] (Cell)

[phone removed by ] (Fax)

Crystal Industries Inc.

[phone removed by ]

28870 Phillips Street

Elkhart, INDIANA 46545 UNITED STATES

[email removed by ]

KEVIN ANTHONY, PRESIDENT OWNER,

RICH RUSSEL MAINTENANCE MANAGER

PACIFIC RADIATOR - Langley BC

Fahim Naheemi <[email removed by ]>

#102-20583 Langley Bypass, Langley, British Columbia,

Canada, V3A 5E8

Sales: [phone removed by ]

Toll free: [phone removed by ]

Fax: [phone removed by ]

Administration: [phone removed by ]

Toll free: [phone removed by ]+

K&K Manufacturing Inc.

951 Nine Mile Road NW, Sparta, MI 49345 UNITED STATES

[phone removed by ]

Fax # [phone removed by ]

Toll Free Order # 1(800) 876-4286

Skype ID: KK Manuf.

Email: [email removed by ]

webmaster:[email removed by ]

Colin Kidder,

B.E.E , ELCTRONICS ENGINEER

EMBEDDED SYSTEMS ENGINEER

Electro-Techno INC (Les Services)

Address: 2055 Rue Roy, Sherbrooke, QC J1K 1B8, Canada

Phone: +1 866-566-5151

Electronics engineer in Sherbrooke, Canada

JEAN BOULAY 8195665157

DR EPIC MFG

Address: 3989 County Rd 40 NW, Garfield,

MN 56332, United States

Phone: +1 320-834-2003

D.R. EPIC-TMS United States of America

Email: [email removed by ]

Phone: [phone removed by ] or [phone removed by ]

A STELLA LASER SERVICE

DEAN RASINK FACTORY ROFIN LASER - FINN POWER TECHNICIAN

Or[phone removed by ].

107 Ridgeview Drive

Starbuck, MN UNITED STATES 56381

StalNik (ODO Prommetizizdeliya)

Belarus, Baranovichi

Stecenko Nikolai Nikolaevich

Warehouse: Brestskaja obl. town

Baranovichi street: Proletarskaja 46

Tel. +375 (163) 68-09-09,68-08-09

Mob. +375 (29) 685-03-27, +375(29) 726-82-17

EMAIL :[email removed by ]

www.stalnik.by

Покупатель:

ОДО class=\"MsoNormal\" style=\"margin-bottom: 0.0001pt; line-height: normal; background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\">(ALC «Prommetizizdeliya»)

Адрес: 225406 Республика Беларусь,

Брестская обл., г. Барановичи,

ул. Брестская, 226-В

УНП 290472675

р/с BY24BAPB30124416700110000000

в ОАО

Тел/факс +375 (163) 68-09-09, 68-08-09

Бухгалтерия: +375 (163) 60-80-28

Эл.почта: [email removed by ]

в лице директора

Стецко Николая (Stetsko N.),

действующего на основании Устава

Meik u. Karsten Müller Gbr

Steintechnik

Lerchenweg 1

35713 Eschenburg-Hirzenhain, Germany

Tel.: +49 (0) 2770 816

Fax: +49 (0) 2770 819

[email removed by ]

[link removed by ]

KARSTEN - PRESIDENT/OWNER

LASER COMPANY IN GERMANY

PHONE 4915123031054

VENOKA DENMARK

Ole Søndergaard

Mobile +45 2459 7802 | [email removed by ]

Michael Tudborg

Mobile +45 2033 1552 | [email removed by ]

Michael Tudborg – Venoka A/S <[email removed by ]>

Thu, 12 Jan 2017, 17:57

Hi Paul, Just a little update…. The box was in perfect condition when itarrived.

It´s now connected and running like new again

Thanks…Best regards Michael Tudborg – Venoka A/S

Adr.: Mads Bjerres Vej 6 – 7500 Holstebro

Tlf.: 97412833 Direkte.: 20331552

Email.: [email removed by ] – Web.:[link removed by ]

Venoka A / S | Mads Bjerres Road 6 | 7500 Holstebro | Tel. +45 9741 2833

Laser Lab Wales LtdUNITED KINGDOM

CRAIG EDWARDS. PRESIDENT/OWNER

Ely Distribution Centre Argyle Way

Cardiff CF5 5NJ

Tel: 07943103491

Email:[email removed by ]

GIMAT srlITALY

TURBINE CUSTOMER

Claudio Magri PRESIDENT/OWNER

[email removed by ]

Via Dell\'Artigianato 1-17

40064 Loc. Ponte Rizzoli

Ozzano dell\'Emilia (Bo) - Italia

Tel +39 051 799573

Fax +39 051 798260

Web Site.:[link removed by ]

Descrizione: class=\"MsoNormal\" style=\"margin-bottom: 0.0001pt; line-height: normal; background-image: initial; background-position: initial; background-size: initial; background-repeat: initial; background-attachment: initial; background-origin: initial; background-clip: initial;\">

FAGO Technik GmbH & Co KGGERMANY

Christian Braun

Gewerbestraße 20-2, D-78244 Gottmadingen

Tel/Fax: 07731-5915091/093

[link removed by ]

Christian Braun.[email removed by ]

Lister EngineeringUNITED KINGDOM

William ListerPRESIDENT/OWNER

PRIMA POWER, PRIMA INDUSTRIES PRC/ CONVERGANT LASERUSATECHNICIANEUROPE.

Director/Engineer at Lister Engineering And Fabrication LTD. A proudpartner ofTTM laser s.r.l.

Bristow Laser Systems

PETER BRISTOW, PRESIDENT/OWNER AND PRC LASER TECHNICIAN

Manufacturer OF LASER SYSTEMS

24 Scammel St •(03) 9305 3166

Office Phone: + 61 3 9305 3166

Office Fax: + 61 3 9305 3788

Peter\'s Mobile: + 61 0438 364 118

Office Email:[email removed by ]

Office Address: 24 Scammel Street

Campbellfield, VIC AUST 3061 AUSTRALIA

Bristow Laser Systems

120 National Blvd • (03) 9357 0088

Preston Displays Pty Ltd

Richard PRESTON PRESIDENT/OWNER PHONE:0412842189

[email removed by ]

Plastic fabrication company in Dandenong South, Victoria

Address: 2/16 Johnston Ct, Dandenong South VIC 3175 AUSTRALIA

ACUFORMCANBERRA AUSTRALIA

MATT PRESIDENT/OWNER PHONE 0418455574

Phone (02) 6260 2533

Fax (02) 6260 2544

Email [email removed by ]

5/73 Sheppard Street

Hume, ACT, AUSTRALIA

MACS ENGINEERING

Manufacturer in Mackay, Queensland

Address: 1C Victoria St, Mackay QLD 4740 AUSTRALIA

ROSS MACS PRESIDENT/OWNER PHONE 61498186347

Phone: (07) 4951 6555

JENNIFER TANDY

1800 88 MACS or

1800 88 6227

Telephone

(07) 4951 6555

2D Victoria St, Mackay, QLD

My contact is 07 49516517 or mobile 0427563397

Ballarat Pressings

KEITH PARRY, PRESIDENT/OWNER/ PHONE 0409177463 GREG PARRY OWNER/SONPHONE0417157969

[link removed by ]

Address: 3181 Old Melbourne Rd, Warrenheip VIC 3352 AUSTRALIA

Ballarat Pressings. 3181 Old Melbourne Rd Warrenheip 3352. Ph: 03 53347040.Fax: 03 5334 7440.

Advance Laser Cutting

Darryl Wilkes PRESIDENT/OWNER

[email removed by ]

Laser cutting service in Henderson, Western Australia

Address: 139 Sparks Rd, Henderson WA 6166

Phone: (08) 9437 5550

Western Australia6166 AUSTRALIA

PH: (08) 9437 5550

Fax: (08) 9410 2799

Email:[email removed by ]

Glyde Metal Industries Pty Ltd

RUSSEL PRESIDENT/OWNER

PHONE 61Z 409 577 215

Metal fabricator in Dandenong South, Victoria

Address: 65 Zenith Rd, Dandenong South VIC 3175 AUSTRALIA

Phone: (03) 9791 3402

IMTS LASER SPECIALISTS.

Peter Tucker DIRECTOR/OWNER,

PRIMA POWER/PRIMA INDUSTRIES ITALY,

FARLEY LASERLAB AUSTRALIA, PRC LASER USA,

CONVERGENT LASER USA, IPG FIBER LASER,

PRC LASER TECHNICIAN. PHONE: cell 0412326542.

MIKE HIGGINSON: PRIMA POWER/ PRIMA INDUSTRIES ITALY,

FARLEY LASERLAB, CONVERGENT LASER,

IPG FIBER LASER, PRC LASER SERVICE

ELECTRONICS ENGINEER/ TECHNICIAN. PHONE: cell 0413966576.

(International +61 3 9314 9888)110 Proximity Drive Sunshine West, VIC3020

Australia

JP Laser Pty. Ltd.

Paul McCormackPRESIDENT/OWNER

Phone: (03) 8339 7412

Fax: (03) 9308 397

Factory Address: 18A Yellowbox Drive Craigieburn Vic. 3064 AUSTRALIA

Postal Address: PO Box 3445 Caroline Springs Vic. 3023 AUSTRALIA

Paul McCormackOWNER

PHONE: 61 412 924 892

MEBIUS Pty Ltd

IGOR.Director /Owner

B.E.E-ELECTRONICS ENGINEER –

EX OEM FACTORY ROFIN SINAR

LASER SERVIVE ENGINEER

BYSTRONIC POWER SUPPLY O/H REPAIRS,

CONVERGANT CV5000 DV DC-DC HV SMPS HVPS OVERHAULS

MELBOURNE, AUSTRALIA

Ph: 0404040920

Email: [email removed by ]

THINK LASER

DENNIS JIGAU. Director /Owner

PHONE: 0424152557

Laser cutting service in Carrum Downs, Victoria AUSTRALIA

[link removed by ]

(03) 8566 9133

Trigg Industries.

Mildura Laser Cutting Pty Ltd

Fast Farm Fencing

Head Office 27 Dyar Avenue, Cabarita VIC 3505 Australia

RODNEY TRIGG, Director /Owner

Postal Address: PO Box SM403, South Mildura VIC 3501 AUSTRALIA

Tel: 61 3 5022 2219

Mobile: 0417 347986

Fax:61 3 5022 2291

[link removed by ]

ABC CUTTING INDUSTRIES

DAVID PISASALE Director /Owner

2 RUTHERFORD ROAD

SEAFORD 3198 VICTORIA AUSTRALIA

PH: 97751025

Yarroweyah Engineering

4346 Murray Valley HWY

Yarroweyah VIC 3644 Australia

TELEPHONE: +61 3 5873 2383

FAX: +61 3 5873 2578

EMAIL: [email removed by ]

CNC MAN Pty Ltd

Address: 46 Greenfield Rd, Capalaba QLD 4157

AUSTRALIA

Phone: (07) 3206 4409

OWNER; WAYNE HOPE

CNC Machine tool sales and service

A GRADE CERTIFIED SENIOR INDUSTRIAL ELECTRICIAN +

EX OEM FACTORY FANUC, CO2 LASER SERVICE TECHNICIAN.

Expert Laser Solutions

2/ 3 David Muir Street, Slade Point QLD 4740 AUSTRALIA

[email removed by ]

PRESIDENT/OWNER, PAT MULHERN

PRC/ OEM BRISTOW LASER TECHNICIAN(07)4955 3331

JT Profile

4 Avey Road

Mount Gambier South Australia 5290

AUSTRALIA

Tel: 08 8725 7857

Mobile: 0400 233 421

Email: [email removed by ]

OWNER: Josh Knightly

Heidelberg General Engineering

27 Commercial Drive

Thomastown Victoria

Australia 3074

Telephone: (03) 9464 1088

Fax: (03) 9464 1359

Email: [email removed by ]

OWNER : JOHN

Concrete Equipment Australia Pty Ltd

CEA Consolidated Industries

136-140 Maffra Street

Coolaroo

Victoria 3048

Australia

Phone: +61 3 9309 1500

Fax: +61 3 9309 1566

Email: [email removed by ]

OWNER: MIKE

This listing and or parts thislisting are owned and developed by Aerospace Dynamics Aust, and are COPYRIGHT2024 it comes under the protection of the laws firstly, if you copy it andor sections of it there will be consequences firstly from Inc.