When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
EVAPORATOR FAN MOTOR
PART# 25309801S
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS just to name a few.............
INTERLINK PART# 25309801S
CAN BE MOUNTED FROM 4 LUGS ON FRONT OF MOTOR OR BELLY BAND AROUND MOTOR.
VOLTAGE: 208-230-1 SINGLE PHASE
RPM: 1400/1650, FOR 208 VOLTS: 1400, FOR 230 VOLTS: 1650
HP: 1/15
AMPS: 0.35/0.40
INCLUDES RUN CAPACITOR, 2 MFD X 370 VAC
RORATION: CCWLE (COUNTER CLOCK WISE LEAD (WIRES)END OR LOOKING AT THE BACK OF THE MOTOR.
FROM THE FRONT OF THE MOTOR THE ROTATION WOULD BE CW OR \"CLOCKWISE\".
SHAFT SIZE: 5/16\"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END:2-3/4\"
FRONT STUDS, CENTER TO CENTER:2-3/8\"
THE LENGTH OF THE MOUNTING STUDS IS: 3/8\"
MOTOR DIAMETER: 3-3/8\"
MOTOR LENGTH: 3-1/2\"
ELECTICIAL CORD IS ABOUT 10\" LONG AND HAS A TWO PRONG CONNECTION, THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
FASCO NO. YSLB-50-4-B003-AS01
TYPE: UF
THERMALLY PROTECTED
NO OILING REQUIRED
This is the evaporator fan motor is used on 90% of the \"low profile\" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simplymatch your motor to the specs in the to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.