When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cleancosmetically with typical construction scuffs for a used tool. Tested, cleaned and ready to go to work saving you money and time. 100% guaranteed.
Shoots 1/2 to 3 inch pins for sheet metal to steel or 2x4 to concrete and all fasteners in between.Will shoot mild steel up to 3/8 inch thick or into concrete, Brick in mortar joints and Block.
Shoots 1/4 threaded studs, Ceiling clips, EMT Clips and a ton of specialty fasteners to numerous to list. Comes with theplasticnon rustedkit box. Some paint on the box. White and Blue
Cleaning brushes. There is spray lube but doesn\'t spray easily.Stop Spall. Keeps concrete for splattering back into operator.Functionally Works well. Safetyeye protection andear protection. Box latches in great shape and box closes perfectly.
Fasteners and Boosters Included:
(100) Unopened Box. 2 7/8 pins for 2x4\'s concrete XAL72 pins, Photo shows opened box but you will receive unopened box.
(35) DN36 nails with 23 mm washer Great for 1/2 plywood to concrete for electrical junction box
(35) 3/4 drywall or thin sheet metal to concrete or steel
Red Loads 68Yellow loads about 49Green Loads 50
Eye protection and hearing protection included. Over $100 in fasteners and Personal; Protection; Equipment that you do not have to look for.
The piston is in good shape. Tool has been tested, clean, no rust, 100% guaranteed.Buy with confidence.
Tool comes with an assortment of pins and loads in a non metal box that has no rust. You have your personal safety gear, hearing and eye protection included. Own a nice Hilti without the new price tag. Non-duct tape tool with good amount of fasteners. Will sell fast.
Thanks for looking
