(BUY 6 GET 4 FREE,Add 10) SUNLU 1.75mm PETG/PLA/PLA+/ASA/ABS/TPU 3D Filament 1KG For Sale

△Tipp: 'Buy 6 get 4 free' means add 10 spools of filament (they can be different colors and materials), and will automatically deduct the cost of 4 spools at checkout. ⭐For example: Add 10 spools, the cost of 4 spools will be deducted. Add 20 spools, the cost of 8 spools will be deducted, and so on. SUNLU Dryer Box:S1 PlusS2S4 ProS4Max heating Temp：55℃
Capacity：1 Roll 1KG FilamentMax heating Temp：70℃
Capacity：1 Roll 1KG FilamentMax heating Temp：85℃
Capacity：4 Rolls 1KG FilamentMax heating Temp：70℃
Capacity：4 Rolls 1KG FilamentAMSE2SP2Max heating Temp：70℃Compatible with all functions of the first-generation Bambu Lab AMSMax heating Temp：110℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG FilamentMax heating Temp：70℃
Capacity：2 rolls 1kg Filament/
1 Roll 2KG Filament/
1 Roll 3KG Filament

SUNLU Filament：

✨️PETG 2.0：PETG 2.0 combines the easy printability of PLA with the strength of ABS, has lower moisture absorption, which helps keep printing stable and improves print quality. At the same time, it’s tougher, with impact strength increased by 50%, offering both rigidity and toughness, so it’s less likely to break and better suited for functional parts printing. Its slightly matte surface also gives models a more textured, premium look.

• Printing Temp&Speed：

230-240℃：50 -100mm/s

240-270℃：100-200mm/s

• Heated Bed Temp：70-80℃
• Tensile Strength：43±10 MPa
• Flexural Strength：70±10 MPa
• Notched Izod Impact Strength：38±8 KJ/m2
• Heat Distortion (HDT)：71±4 ℃

✨️SILK 2.0 ：Surface brightness increases by 60%, showing a finer and more even silk texture, making every piece visually stunning. The interlayer bonding strength is 50% higher than regular silk PLA, balancing flexibility and strength, so it’s less likely to crack, combining beauty with durability.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-235℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：51±4 MPa
• Flexural Strength：77±5 MPa
• Notched Izod Impact Strength：15.5±1.5 KJ/m2
• Heat Distortion (HDT)：57±3 ℃

⭐PLA Light Weight：Low density and lightweight, the same model is about 30% lighter than PLA; matte texture, easy to color, specially made for 3D printed model airplanes.

• Printing Temp&Speed：

180-200℃：30-100mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：20±4 MPa
• Flexural Strength：35±5 MPa
• Notched Izod Impact Strength：2.5±1 KJ/m2
• Heat Distortion (HDT)：53±3 ℃

⭐PLA：PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use; Good compatibility, suitable for beginners to get started printing！

• Printing Temp&Speed：

200-210℃：50 -100mm/s

210-240℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：40±6 MPa
• Flexural Strength：65±6 MPa
• Notched Izod Impact Strength：5±3 KJ/m2
• Heat Distortion (HDT)：55±5 ℃

⭐High Speed PLA：Supports fast printing at 600mm/s; Good fluidity, fast printing without clogging, no shortage of materials: volume flow rate of 30mm ³/s.

• Printing Temp&Speed：

190-210℃ ：50-150mm/s

210-230℃ ：150-300mm/s

230-260℃ ：300-600mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：39±5 MPa
• Flexural Strength：70±5MPa
• Notched Izod Impact Strength：4.5±2 KJ/m2
• Heat Distortion (HDT)：57±4 ℃

⭐PLA+：The wire has good toughness and is not brittle or broken; Has good comprehensive mechanical performance, particularly resistant to drops, with an impact strength of up to 8KJ/m2, which is 2-3 times that of other PLA+ on the market;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：46±5 MPa
• Flexural Strength：83±5 MPa
• Notched Izod Impact Strength：10±3 KJ/m2
• Heat Distortion (HDT)：56±3 ℃

⭐PLA+2.0 ：It has good toughness, 2-3 times that of regular PLA+ , and is resistant to drops and impacts.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-200mm/s

• Heated Bed Temp：50-60℃
• Tensile Strength：46±5 MPa
• Flexural Strength：83±5 MPa
• Notched Izod Impact Strength：10±3 KJ/m2
• Heat Distortion (HDT)：56±3 ℃

⭐PETG：PETG combines the easy printability of PLA with the strength of ABS. It has excellent chemical and water resistance, making it suitable for printing functional parts. It’s tough and doesn’t easily break while printing.

• Printing Temp&Speed：

230-240℃：50 -100mm/s

240-260℃：100-200mm/s

• Heated Bed Temp：60℃-70℃
• Tensile Strength：48±10 MPa
• Flexural Strength：70±10 MPa
• Notched Izod Impact Strength：3±1 KJ/m2
• Heat Distortion (HDT)：70±5 ℃

⭐High Speed Matte PETG ：PETG that supports fast printing at 600mm/s; Matte texture, with a delicate printed surface; Not easy to draw;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

240-250℃：100-300mm/s

260-270℃：300-600mm/s

• Heated Bed Temp：70℃-80℃
• Tensile Strength：46±5MPa
• Flexural Strength：75±6MPa
• Notched Izod Impact Strength：3±1.5KJ/m2
• Heat Distortion (HDT)：70±2 ℃

⭐SILK PLA+ ：Silky texture with strong shine, smooth and soft appearance; high interlayer strength, so printed models are not easy to crack or break.

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-235℃：100-200mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：50±4MPa
• Flexural Strength：78±5 MPa
• Notched Izod Impact Strength: 3.5±1.5 KJ/m2
• Heat Distortion (HDT)：57±3 ℃

⭐PLA Meta：Good liquidity, supports fast printing without clogging; Printing temperature is 10 ℃ lower than ordinary PLA, more energy-efficient and environmentally friendly; Good toughness, not easy to break, and the printed works are resistant to falling and smashing.

• Printing Temp&Speed：

185-195℃：50-100mm/s

195-225℃：100-200mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：50±5MPa
• Flexural Strength：85±6MPa
• Notched Izod Impact Strength: 6.5±2.5 KJ/m2
• Heat Distortion (HDT)：57±3 ℃

⭐PLA Matte：Matte finish makes printed models feel more textured, ditching the plastic look;

• Printing Temp&Speed：

205-215℃：50 -100mm/s

215-245℃：100-230mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：39±6 MPa
• Flexural Strength：72±6 MPa
• Notched Izod Impact Strength: 5±2 KJ/m2
• Heat Distortion (HDT)： 55±5 ℃

⭐High Speed PLA Matte：Supports printing speeds of 600mm/s, greatly improving printing efficiency; matte finish makes printed models feel more textured.

• Printing Temp&Speed：

190-210℃ 50-150mm/s

210-230℃ 150-300mm/s

230-260℃ 300-600mm/s

• Heated Bed Temp：50℃-60℃
• Tensile Strength：27±4 MPa
• Flexural Strength：50±6 MPa
• Notched Izod Impact Strength: 8±3 KJ/m2
• Heat Distortion toughness and high impact resistance ensure that printed parts are strong and durable; low shrinkage rate means high dimensional accuracy for printed models; 95℃ heat deflection temperature gives it some heat resistance, making it suitable for a wide range of uses.
  • Printing Temp&Speed：

  250-270℃：50-100mm/s

  270-290℃：100-200mm/s

  • Heated Bed Temp：80-100℃(Insulated and sealed environment,better effect)
  • Tensile Strength：35±5 MPa
  • Flexural Strength：60±10 MPa
  • Notched Izod Impact Strength: 15±5 KJ/m2
  • Heat Distortion (HDT):95±5 ℃
  ⚽️TPU（90A）：Shore hardness 90A, highly elastic and wear-resistant;99.9% highly effective at preventing bacteria and mold, stays clean for a long time; excellent aging resistance, longer service life;
  • Printing Temp&Speed：

  220-240℃：≤40mm/s

  • Heated Bed Temp：50-60℃
  • Tensile Strength：30±3 MPa
  • Flexural Strength：/
  • Notched Izod Impact Strength: /
  • Heat Distortion (HDT):36±2 95A, combining flexibility and toughness.
    • Printing Temp&Speed：

    220-240℃：≤40mm/s

    • Heated Bed Temp：50-60℃
    • Tensile Strength： 31±3 MPa
    • Flexural Strength：/
    • Notched Izod Impact Strength: 47±5 KJ/m2
    • Heat Distortion (HDT):/
    ⭐PETG Carbon Fiber： Contains 10% carbon fiber, high strength and toughness, printed parts are drop- and smash-resistant; with more carbon fiber, it hides layer lines.
    • Printing Temp&Speed：

    240-250℃：50 -150mm/s

    • Heated Bed Temp：70-80℃
    • Tensile Strength：32±4 MPa
    • Flexural Strength：55.5±5 MPa
    • Notched Izod Impact Strength: 7±2 KJ/m2
    • Heat Distortion (HDT):71±3 ℃
    ⭐ASA：Strong weather resistance, printed items can be used outdoors; high toughness, suitable for regular engineering parts; heat resistant up to 96°C, suitable for a variety of uses.
    • Printing Temp&Speed：

    250-260℃：50 -100mm/s

    260-280℃：100-200mm/s

    • Heated Bed Temp：90-110℃
    • Tensile Strength：39±4 MPa
    • Flexural Strength：68±5 MPa
    • Notched Izod Impact Strength: 7±3KJ/m2
    • Heat Distortion (HDT):101±2 ℃
    ⭐High Speed PLA Marble：The marble effect is realistic, with delicate printing and high precision; Printed works have a marble texture;Supports high-speed printing up to 600mm/s;Smooth printing without clogging;Low shrinkage rate, printing large-sized building models without warping edges;
    
    • Printing Temp&Speed：

    190-210℃：50-150mm/s

    210-230℃：150-300mm/s

    230-260℃：300-600mm/s

    • Heated Bed Temp：50-60℃
    • Tensile Strength：41±6 MPa
    • Flexural Strength：72±5 MPa
    • Notched Izod Impact Strength: 11±3 KJ/m2
    • Heat Distortion (HDT):55±3 ℃
    ⭐PLA Holz：PLA containing 15% wood powder, the model has a woody texture and aroma!
    • Printing Temp&Speed：

    195-205℃ 50-100mm/s

    205-215℃ 100-150mm/s

    215-260℃ 150-400mm/s

    • Heated Bed Temp：60-65℃
    • Tensile Strength：33±6 MPa
    • Flexural Strength：55±5 MPa
    • Notched Izod Impact Strength: 6±3 KJ/m2
    • Heat Distortion (HDT): 55±3 ℃
    ⭐PLA Carbon Fiber：PLA with 15% carbon fiber; the printed models are lightweight and strong.
    • Printing Temp&Speed：

    215-225℃ 50-100mm/s

    225-245℃ 100-200mm/s

    • Heated Bed Temp：50-60℃
    • Tensile Strength：44±5 MPa
    • Flexural Strength：79±5 MPa
    • Notched Izod Impact Strength: 3.5±1.5 KJ/m2
    • Heat Distortion (HDT):55.5±3 ℃
    ⭐⭐ PLA Glow in the Dark：The printed model can glow at night after absorbing light, sunlight, or UV light;The brightness and duration of glow after absorbing UV light > sunlight > lamp light
    • Printing Temp&Speed：

    205-210℃;50-100mm/s

    210-240℃;1000-200mm/s

    • Heated Bed Temp：50-60℃
    • Tensile Strength：40±6MPa
    • Flexural Strength：65±6MPa
    • Notched Izod Impact Strength: 5±3KJ/m2
    • Heat Distortion (HDT):55±5℃
    ⭐SILK Dual/Tri/Four Color： Silky texture with strong luster, showing a soft 2/3/4 color change from different angles, with a delicate and gentle appearance;
    • Printing Temp&Speed：

    210-230℃;50-200mm/s

    • Heated Bed Temp：50-60℃
    • Tensile Strength：50±4MPa
    • Flexural Strength：78±5MPa
    • Notched Izod Impact Strength: 3.5±1.5KJ/m2
    • Heat Distortion (HDT): 57±3℃
    ⭐PLA Galaxy： It has a color-changing iridescent effect, so you can see different colors when looking at the printed model from the same spot but different angles.
    • Printing Temp&Speed：

    200-230℃;≤250mm/s

    • Heated Bed Temp：50-60℃
    • Tensile Strength：43.3±6MPa
    • Flexural Strength：80.3±10MPa
    • Notched Izod Impact Strength: 3.8±1.2KJ/m2
    • Heat Distortion (HDT): 54.6±3℃
    ⭐PLA Matte Dual Color： The printed model shows a soft two-tone change from different angles, giving it a strong sense of visual layering; the delicate matte surface enhances the model's premium feel and artistic expression.
    • Printing Temp&Speed：

    205-215℃;50-100mm/s

    215-245℃;1000-230mm/s

    • Heated Bed Temp：50-60℃
    • Tensile Strength：39±6MPa
    • Flexural Strength：72±6MPa
    • Notched Izod Impact Strength: 5±2KJ/m2
    • Heat Distortion (HDT): 55±5℃
    Q&AQ: What's the wire diameter and tolerance for the filament?A：SUNLU filament diameter is 1.75mm, with a tolerance of ±0.02mm;Q: Which printers are your spools compatible with?A：Our 1KG filament spool is compatible with common printer brands on the market, like Creality K2, ELEGOO, and Bambu Lab.Q: Where do you ship from? Do you support returns and exchanges?A：The packages are shipped directly from Kentucky, and customers within the US don't need to pay for shipping. For US customers, we offer free returns and exchanges within 30 days.If there are any questions, please feel free to contact us anytime via mail. Our customer service will respond within 24 hours（Beijing time Monday to Friday）. Thank you for your support!

    SUNLU Engineering Filament 1.75mm

    Printing Temp&SpeedHeated Bed TempFeatureEasy PA250-270℃；50-100mm/s
    270-280℃；100-150mm/s30-50℃NO CRACKS & ANTI-WARPING - Nylon 3d printer filament offers excellent printing quality with no cracks or warping. Neat SUNLU Filament ensures smoother print surface.HEAT RESISTANT PA - Heat resistance up to 121°C. Nylon filament Tools are ideal for high-temp applications, such as fuel dispensers, electronic surface mount devices.EASY TO USE & UV RESISTANCE - Larger spool inner diameter makes feeding smoother. SUNLU Nylon Filament 1.75mm features uv-resistance, no brittleness or 20% short carbon fiber; light weight ; heat deflection temperature is 209°C; high strength and toughness;High strength, prints are strong and durable.
    High toughness, the prints are resistant to falling and smashing.
    Frosted texture on the surface of the 20% carbon fiber; heat deflection temperature is 176°C; high strength and toughness;High impact resistance, anti-drop and anti-smash;
    Excellent durability and resistance to abrasion and wear;
    Lower density and lighter mass;
    Low water absorption, high printing precision and dimensional heat resistance (temperature resistance 102℃);
    Ultra-high toughness, high impact resistance (notched impact strength: 70KJ/m²);
    Can be used for secondary surface treatment (e.g. electroplating, PP glue）1. Low density and lightweight, printing the same model weighs about 27% less than PLA;
    2. Can directly touch food;
    3. Excellent resistance to chemical corrosion. Will not deform, damage, or melt in strong acid and alkali (PH 0.5-14) environments;
    4. High toughness, not easily broken, with excellent durability and fatigue lac glue）High toughness, hot deformation temperature of 100 ℃, no cracking or warping during printingFR-ABS

    240-250℃ 50-100mm/s

    250-260℃ 100-200mm/s80-90℃（Apply glue）V0 flame retardant level, good impact resistance, drop resistance, low warpage, no crackingPA6-GF

    270-290℃ 50-120mm/s

    50-70℃（Apply glue）Containing 25% glass fiber, with a thermal deformation temperature of 205 ℃;
    High strength, high toughness, low shrinkage, no cracking or warping during printingPrinting tips:

    We recommend using wear-resistant nozzles made of tungsten caroffere or hardened steel to print engineering materials and replacing them regularly.

    Engineering materials have high shrinkage stresses and are prone to cracking when printed at low ambient temperatures.Therefore, closed printers or thermal enclosures are required for printing.Open prints have a higher failure rate;

    Drying Temperature/DurationAnnealing temperatureEasy PA
    PA6-CF
    PA6-GF
    PA12-CF70℃- ≥24h
    80℃- ≥12h
    90℃- ≥10h
    110℃- ≥4h90℃-12H
    110℃-6H
    130℃-3HPC-ABS70℃- ≥12h
    80℃- ≥6hno need Annealing