When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1.1Gal (5000ml) Stirring digital display thermostatic heating sleeve
I. Introduction
Designing by European techniques, with its advance technology, stable performance, novel structure and good using effect, this equipment is widely used for in heating in labs of colleges, petrochemical industries, medicine, and environment protection institutions etc.
Ⅱ. Characteristics
1.Cold rolling sheet stretching and spraying exterior.
2.Use advanced digital temperature control system can precisely control the temperature of the heated liquid, easy to use, high precision, temperature display intuitive.
3.Using high quality nickel-chrome heating resistance wire sealed in high temperature insulation layer. Woven into half the ball in heating sets, with characteristics of large heating area, fast warm-up, high temperature evenness, no open flame and so on.
Ⅲ. Working condition
Ambient temperature: 5~40℃;
Ambient humidity: ≤90%;
Voltage: 220V （come with a power transformer 110V to 220V）
Ⅳ.Main technical parameters：
Model
98-II-C
Capacity (ml)
50
100
250
500
1000
2000
3000
5000
Voltage(v)
110V/220V （come with a power transformer 110V to 220V）
Max. use tem.
300℃
Tem. Range
Ambient tem.～40℃
Sensor
PT100
Working mode
continuous
Power(W)
80
100
150
250
350
450
600
800
(Red color is available)
Ⅴ. Operation instruction
a)Place the equipment on level worktable, put the sensor frame, and plug it into sensor block on the back of the instruments
b)Fill a liquid container in the instrument, and set the sensor in the heated liquid.
c)Use the same voltage as the machine required, and then the instrument’s screen will display the temperature of the liquid.
d)Set temperature: after press “S” ,the green button “Set” indicator light, the screen display the set temperature, and press the arrow keys to select the temperature you want to use. After setting temperature, press “S” to display the actual temperature.
e)When heated the red indicator light, lights off when not heated.
f)When temperature rose to the set temperature at the first time, it may be washed for few degrees; it will stabilize down when the temperature came down.
g)Stirring adjust: Adjust the stirring speed by turn the knob clockwise.
Ⅵ. Safety attentions
Connect the device to an earthed power supply to ensure safety of machine and experiment; connect the power as the machine required.
This equipment is foroffer to use in inflammable and explosive, poisonous and strong corrosive experiments.
Make sure horizontal installation.
Non-professionals are not allowed to disassemble and repair this machine.
Pay attention to the set temperature while dealing with the inflammable matters.
Make sure dry the resin container, if the temperature is setting too high by accident, the container would be dissolved and then fall on the heater to cause fire.
Overfilled of sample will lead to overheat of working room under parts, which will dissolve the inflammable material and cause fire.
While the machine is working, don’t touch the top, window and exhaust port of the device to protect from high-temperature burns.pan>
Read the instruction book before operation.
Ⅶ. Usage notes
1.Because of the surface of heat insulation material is coated with grease, in the first used shall first heat except when heating oil, will appear white smoke, shut off the power after heating to smokeless, when the temperature come down, it can normal use
2.When use the instrument should pour the liquid into the container firstly, and then put in the instrument to use.
Ⅷ. Fault analysis
Phenomenon
Causation
Treatment
No power
Poor connect ofsocketandplugcircuit notcloses.
Adjust the socketand plugAdjust the circuit
No heating
Heating jacket wire is broke
Changheatingjacket
Notemperature
control
The control panel is broke
Changecontrol panel
Ⅸ. Storage and transportation
Keep it in dry and clean room with good ventilation and no corrosive gas, prevent it from wetting by the rain and avoid violent collision in Unit020208220v 5000ml Stirring digital display thermostatic heating sleeve1set
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Sales Tax of 8% will be applied for orders shipped within the state of California.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Payment
eCheck Issues:Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.
Warranty & response
▲6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it's very important for us. Thanks very much.
On Mar 4, 2025 at 23:12:26 PST, seller added the following information:
On Sep 10, 2025 at 05:41:42 PDT, seller added the following information:
