Product features
• Prefilter syringe filter provides two times greater throughput than standard filter without pre-filtration.
• Both for mechanical and tensile high level of strength.
• Used for most mid-polar liquids and organic solvents.
• Low level extractable makes them suitable for environment analysis,proteins and extractables.
• High level flow rate because of symmetric TypePES Syringe FiltersMembranePolyethersulfone (PES)Housing MaterialPPPrimary ColorGreenPrimary Size0.22μmFilter FreeYesSample Volume100mLpH Range1-14 pHFlow Rate120-146ml/min (10 psi, 25℃)Filtration Area4.9cm2Hold-up Volume (µL)<110μLMaximum Operating Pressure87 psiInlet ConnectionFemale Luer LockOutlet ConnectionMale Luer SlipSample TypesAqueous、Solvents and harsh liquids according to chemical compatibilityPack DescriptionIndividualCase Quantity10Applications:
Clarification of protein laden solutions
Filtration of fluids with high particle loads
Processing immunoassay and nucleic acid hybridization samples
Polyethersulfone (PES) for serum, plasma and tissue culture
Protein based samples in aqueous solutions
Mild organic solutions
Routine sample preparation
Environmental samples
Package list:
10pcs Sterile PES Syringe Filters
How to use a syringe filter?
Choose the right type of membrane material based on the properties of your sample. Be careful of the chemical compatibility to avoid extractables and leachables. Read this article about How to choose a syringe filter.
1. Load the sample into the syringe.
2. Attach the filter to the luer-lock of the syringe with a twisting motion. Make sure it is securely attached.
3. Filter the sample. Hold the syringe and filter vertically, and gently press the plunger to push the sample through the filter. Take care not to apply too much force or you may damage the filter.
4. Discard the used filter and repeat for the next sample.
