When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PECS: M12x1.25 Thread - Closed End Bulge Acorn Mag Seat Lug Nuts - 1.46" Tall
FITS: Vehicles with wheel studs requiring a 12x1.25 thread and wheels that take a thread seating style hex etc.
VERIFY FITMENT: By matching this lug's specs (thread, seating style, hex, etc.) to match both your vehicle and wheel requirements. Or contact our Customer Experience Team to verify a safe and proper fitment.
INCLUDES: 20 Pcs Black Closed End Bulge Acorn Lug Nuts Mag Set
Fitment:
2009-2020 370Z
2008-2020 Altima
2005-2014 Armada
1998-2020 Frontier
2012-2020 Maxima
2019-2020 Murano
2004-2020 Pathfinder
2004-2017 Quest
2001-2019 Sentra
2004-2015 Titan
2005-2015 Xterra
2008-2012 EX35
2007-2008 G35
2008-2013 G37
2014-2020 Q50
2014-2019 Q60
2014-2020 QX50.
The above shows only some models, if you have any problem ,contact our Customer Experience Team to verify a safe and proper fitment.
Installation Instructions:
1. Make sure wheel studs are clean and tight. Replace ortighten a problem stud.
2. Ensure the wheel is flat against mounting surface withstuds through each hole.
3. All nuts should be hand started and thensecured in a criss-cross sequence with a torque wrench and socket. Refer to your vehicleowner's manual or wheel manufacturer's guide for propertorque specifications. 12mm Lug size should use 70-80 torque.
4. Check and retighten all nuts after 25 miles of driving andagain after 50 miles, until wheel nut torque remains unchanged.
