800F 60cm Manual Tile Cutter - Tungsten Wheel, Infrared Positioning, Ruler For Sale

🔥WELCOME TO yanqiuwangluo66 - Your Trusted Destination!🔥🔥Intro Offer! Act Fast!🔥 60cm Manual Tile Cutter (Model 800F) — Tungsten Alloy Cutting Wheel, Infrared Positioning

A compact, manual tile cutter designed for precise straight cuts on porcelain and ceramic floor and wall tiles. Infrared positioning and a clear guiding ruler help you line up cuts quickly. Easy to operate — no power required. 🔧

Key Features

• Reinforced Tungsten Alloy Wheel: High-hardness wheel for smooth, flat cuts with minimal burrs.
• Infrared Positioning: Embedded collimator for improved alignment and accuracy.
• Durable Construction: Aluminium alloy handle, base and bearings; hardened alloy steel slide rail with electroplating.
• Smooth Operation: High-quality ball bearings and ergonomic handle with non-slip rubber end.
• Stable Base: Thickened base and screw-reinforced handle for secure cutting.
• Portable & Energy-free: Manual operation—no electricity or fuel required. ♻️

The cutter scores the tile with the tungsten wheel, then breaks it cleanly along the scored line using the handle. A sponge pad and shockproof U-shaped sheath protect tiles during break-off.

SpecificationsProduct Model800FCutting Wheel ModelYG96ColorBlueCutting Wheel MaterialTungsten AlloyHandle & Bearing MaterialAluminium AlloyBase MaterialAluminium Alloy, SpongeSlide Rail MaterialAlloy SteelSlide Rail Surface TreatmentHardening Process, Electroplating ProcessOperating MethodManualGuide RailDual TrackSpecial FunctionInfrared PositioningBalancing Brackets & Ruler Bar Adjustable Angle0–90°Battery Type2 × AAA (Included)Slide Rail Diameter20mm / 0.78inBase Plate Thickness1.2mm / 0.04inMaximum Cutting Width60cm / 23.6inMinimum Cutting Width1cm / 0.39inMaximum Cutting Thickness15mm (3/5 inch)Gross Weight8kg / 17lbsPackage Size82 × 25 × 18cm / 32 × 9 × 7 inchBase Size (L × W)81 × 20cm / 31 × 7.87 inchPackage Included

• 1 × Manual Tile Cutter (with Balancing Brackets + Ruler Bar)
• 1 × English Manual

Usage

1. Fixed Position: Place tile flat on the base, align the cutting line with the center support plate; front edge near base plate notch.
2. Score and Press Down: Lower the handle so the cutting wheel contacts the tile surface and push forward to score a straight line.
3. Break-off: Slightly lift the handle backward so the pressure block rests on the front end, then press down to snap the tile along the scored line.

Care & Maintenance

• Keep slide rails clean and dry; wipe after use to reduce wear.
• Store in a dry place to help prevent corrosion despite electroplated finish.
• Replace the cutting wheel if you notice reduced cutting performance.

Important Notes

• Compatibility: Suitable for tiles up to 15mm thick and up to 60cm wide — please check these measurements against your tiles before purchase.
• Batteries (2 × AAA) are included for the infrared positioning unit.
• Package contents are based on the listed information.

Ready to handle straight cuts for a wide range of ceramic and porcelain tiles — add this 60cm manual tile cutter to your toolkit for straightforward, non-powered cutting. Order now to improve on-site cutting efficiency.

PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer\'s responsibility.Delivery detailsShipping:2-9 working days to: USATerms of sales

• We maintain high standards of excellence and strive for hundred percent customer satisfaction. response is very important to us. We hope that you contact us immediately before you give neutral or negative response, so that we can address your concerns. It is impossible to address issues if we do not know about them!

About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions.Country of OriginUnknownManufacturer Warranty3 YearsHerstellergarantie3 Use,Easy Operation,Easy installation1.Features`Easy installation,Compact DesignMPNDoes Not ApplyModel800FMaterialAluminium AlloyMaximum Cutting Width60cm/23.6inMinimum Cutting Width1cm/0.39inchMaximum Cutting Thickness15mm (3/5inch)Cutting Wheel ModelYG96Applicable MaterialsWall tiles,floor tiles,vitrified tiles,marble tileCutting Wheel MaterialTungsten AlloySlide Rail MaterialAlloy SteelOperating MethodManualGuide RailDual TrackSpecial FunctionInfrared PositioningBalancing Brackets & Ruler BarAdjustable Angle Range 0-90°Battery Type2* AAA (Included)Slide Rail Diameter20mm/0.78inBase Plate Thickness1.2mm/0.04inGross Weight8kg/17lbsUPCDoes not apply

On Aug 30, 2026 at 23:46:30 PDT, seller added the following information: