When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Eaton Cutler-Hammer neutral current sensor, catalog LGFCT630, style number 6633C29G04. The blue label reads NEUTRAL CURRENT SENSOR, CAT. NO. LGFCT630, STYLE NO. 6633C29G04, CURRENT RATIO 630/600 : 0.06, BLUE. The rear label reads 6633C29G04 / 1525. Grey molded housing with a bar-type primary (two hex-head mounting bolts with washers on silver-plated pads) and two brass secondary studs with blue-insulated ring leads. Casting is marked 260050B-06.
This is the external neutral sensor used with Eaton Series G LG-frame electronic trip breakers (LSG / LSIG ground fault versions) to carry the neutral current signal to the trip unit for ground fault sensing on 4-wire systems. It is the 600/630 A rating of the LGFCT family (LGFCT250 and LGFCT400 are the smaller sizes). Please check the sensor catalog number against your breaker's instruction leaflet before buying; we do not have the paperwork for this unit.
What you get: one (1) LGFCT630 neutral current sensor with its two mounting bolts and washers, in a plain white box. No instruction sheet.
Condition: New old stock, never installed, no wrench marks on the bolts, leads untouched. Plain unlabeled box, open, light scuffing. Not electrically tested. Sold as surplus with no warranty expressed or implied.
Safety: Install by a qualified electrician in accordance with the NEC, local code, and the breaker manufacturer's instructions. A neutral sensor must match the breaker frame and rating plug it is used with; buyer is responsible for verifying suitability for the application.
What you see is what you get: photos are of the actual item(s). Ships boxed and protected, with tracking. Reasonable offers are always welcome. Questions before you buy? Message us, we answer fast.
