HIGH TECK HFP 250 GM 8555 EBONY BLACK BASECOAT AUTO PAINT GALLON SIZE For Sale

Brand New, High-Quality Automotive Basecoat Paint for Professional Results!

Are you looking to restore or customize your vehicle\'s finish with a deep, luxurious ebony black? Look no further! This is a genuine High Teck HFP 250 basecoat auto paint in the classic GM 8555 Ebony Black color code, perfect for matching General Motors vehicles or any project needing a sleek, OEM-style black. Supplied in a generous gallon size (128 fl oz), this high-performance paint provides excellent coverage, durability, and a smooth application for both DIY enthusiasts and professional body shops.

• Color Match Perfection: Specifically formulated to match GM color code 8555 (Ebony Black), commonly used on Chevrolet, GMC, Cadillac, and other GM models from various years. Ideal for touch-ups, full resprays, or custom jobs.
• Premium Quality: High Teck\'s HFP 250 series is a high-flow, low-VOC basecoat designed for superior adhesion, color retention, and resistance to fading, chipping, and UV damage.
• Versatile Use: Suitable for automotive, motorcycle, marine, or industrial applications. Works great over properly prepared primers and can be topped with clear coats for a glossy, long-lasting finish.
• Coverage: One gallon typically covers 200-300 sq ft depending on application method, number of coats, and surface type (always test for your specific needs).
• Made in the USA: Ensures consistent quality and compliance with environmental standards.

This paint is ready to mix and spray – no additional thinners included, but compatible with standard automotive reducers (sold separately). It\'s a solvent-based formula for professional-grade results, ensuring a factory-like appearance.

For best results, follow these step-by-step instructions.

1. Preparation:
   • Clean the surface thoroughly: Remove old paint, rust, grease, and contaminants using a degreaser and sandpaper (start with 400-grit for rough surfaces, finish with 600-800 grit for smoothness).
   • Apply a suitable primer (e.g., High Teck epoxy or urethane primer) and let it cure fully (follow primer instructions).
   • Mask off areas not to be painted with tape and paper.
2. Mixing:
   • Shake or stir the paint well before use.
   • Mix with a compatible reducer/thinner at a ratio of 1:1 (paint to reducer) for optimal flow. Use a medium-speed reducer for temperatures 70-85°F (21-29°C). Adjust based on your spray gun and environmental conditions – test viscosity with a Zahn cup (aim for 18-22 seconds).
   • Do not add hardeners to the basecoat; save that for clear coats.
3. Application:
   • Use an HVLP spray gun with a 1.3-1.4mm tip for even coverage.
   • Apply in light, even coats: 2-3 medium wet coats, allowing 5-10 minutes flash time between coats (until tacky but not dry).
   • Spray at 25-35 PSI at the gun, holding 6-8 inches from the surface. Overlap passes by 50% for uniform color.
   • Ideal temperature: 70-80°F (21-27°C) with low humidity. Avoid direct sunlight or windy conditions.
   • Dry time: Flash dry in 10-15 minutes; ready for clear coat in 30-60 minutes.
4. Top Coating:
   • Apply a compatible clear coat (e.g., High Teck 2K urethane clear) within 1-2 hours for best adhesion. Follow clear coat instructions for mixing and application (typically 2-3 coats).
   • Full cure: 24-48 hours at room temperature; can be force-dried with heat lamps.
5. Clean Up:
   • Clean tools immediately with lacquer thinner or acetone.
   • Dispose of waste according to local regulations – this product contains solvents.

• Hazard Warning: Flammable liquid and vapor. Contains solvents that may cause irritation to skin, eyes, and respiratory system. Use in a ventilated spray booth or outdoors.
• PPE Required: Wear a respirator (NIOSH-approved for organic vapors), gloves, eye protection, and protective clothing.
• Storage: Keep in a cool, dry place away from heat/sparks. Shelf life: 1-2 years unopened.
• First Aid: If inhaled, move to fresh air. For skin contact, wash with soap and water. Seek medical attention if needed.
• Not for household use. Keep out of reach of children.

This gallon of High Teck HFP 250 GM 8555 Ebony Black Basecoat is brand new, factory-sealed, and ready to ship. Perfect for restoring that classic GM shine!

Shipping: Ships via ground only due to hazmat regulations (no air shipping). US buyers only – check local laws for VOC compliance.

If you have questions, message me before purchase.