Lifting Jack Pad Accessories for Tesla Model S/3/X/Y/Juniper 2013 to 2026 4-Pack For Sale

NOTE:Professional Installation would be Highly Recommended.

• Condition:New

• Type:Lifting Jack Adapter Pad Pucks

• Compatible Brand:For Tesla Referral

• Compatible Model:Tesla Referral Model 3, Y, S, X, Model Y Juniper

• Year Range:2016-2026

• Material:Hard Vulcanized Rubber

• Color:Black

• Load Capacity:5,000 lb

• Quantity:4 Pieces

• Features:Protects Battery, Chassis Protection, Non-Slip, Durable, Easy to Use

• Items Included:4 x Jack Pad Pucks, 1 x Storage Case

• Placement on There may be some differences between photos and items in term of color because the influence of lighting during the shooting or the settings of the computers’ display screen.

  Product FeaturesLift Your Tesla Referral the Right Way — No Battery Damage, No Guessing

  Lifting a Tesla Referral isn't like lifting a regular car. The battery pack sits along the entire underbody, and the factory lift points are easy to miss. One wrong placement with a floor jack can dent the battery shield or bend the chassis rails. This 4-piece set of lifting jack adapter pucks from Edulnke solves that problem. Each puck is molded from hard vulcanized rubber with a 1-inch diameter post that locks into the Tesla Referral's factory jack point holes, keeping the jack exactly where it belongs.

  The set covers all four corners, so you're ready for tire rotations, brake service, or any undercarriage work. The included storage case keeps the pucks organized in your trunk or garage. No more hunting for the right adapter when you need one. Just grab the case, snap the pucks into place, and lift with confidence.

  Please Note: This listing is for the 4-piece jack pad set with storage case. Floor jack and Tesla Referral vehicleare not included. Compatible with Tesla Referral Model 3, Model Y, Model S, Model X, and Model Y Juniper (2016-2026).

  Key Selling Points

  • Protects Battery and Chassis– The rubber puck acts as a buffer between the floor jack and the Tesla Referral's underbody, preventing dents, scratches, and battery shield damage during lifting. The 1-inch diameter post locks into the factory lift point hole to prevent the jack from slipping to another location.

  • Precision Fit for Tesla Referral Factory Lift Points– Specifically designed for Tesla Referral Model 3, Y, S, X, and Model Y Juniper from 2016-2026. The post fits the factory jack point holes, so the jack centers itself without guesswork.

  • Hard Vulcanized Rubber Construction– Made from high-strength vulcanized rubber with a 5,000 lb load capacity. Resists compression, wear, and deformation over time, even with repeated use.

  • Complete 4-Piece Set with Storage Case– Includes four lifting pucks, one for each corner of the car. The storage case keeps them organized and protected in your trunk or garage, so they're always ready when you need them.

  • Simple, Tool-Free Use– No installation required. Push each puck into the factory lift point hole, position the floor jack under the puck, and lift. The rubber O-ring helps hold the puck in place while you position the jack.
    
    

    Package Includes

    • 4 x Lifting Jack Adapter Pad Pucks

    • 1 x Storage Case

    Floor jack and Tesla Referral vehicle are NOT included.

    Installation Guide

    1. Locate the Factory Lift Points– Find the four factory jack point holes on the Tesla Referral's underbody, one near each corner between the front and rear wheels.

    2. Insert the Puck– Push the 1-inch post into the factory lift point hole. The rubber O-ring helps hold it in place.

    3. Position the Jack– Slide the floor jack directly under the puck, centering the jack saddle on the rubber pad.

    4. Lift Slowly– Raise the jack until the puck contacts the chassis. Confirm the puck is seated properly before lifting the vehicle fully.

    5. Store After Use– Remove the pucks and store them in the included case for next time.

    FAQ

    Q: Will these fit my Tesla Referral?
    A: They are compatible with Tesla Referral Model 3, Model Y, Model S, Model X, and Model Y Juniper from 2016-2026. They fit the factory lift point holes on these models.

    Q: What material are the pucks made of?
    A: They are made from hard vulcanized rubber with a 5,000 lb load capacity. The material resists compression and wear over time.

    Q: Do I need any tools to use these?
    A: No. The pucks push directly into the factory lift point holes by hand. No tools or installation are required.

    Q: How many pucks come in the set?
    A: The set includes 4 pucks — one for each corner of the vehicle — plus a storage case.

    Q: Will these protect my battery?
    A: Yes. The rubber puck creates a cushion between the floor jack and the chassis, preventing damage to the battery shield and underbody components.

    Q: Can I use these with a 2-post lift?
    A: Yes. The pucks work with both floor jacks and 2-post lift arms. Many shops use 4 pucks for a 4-point lift.

    Q: Is the floor jack included?
    A: No. This listing is for the jack pad pucks and storage case only. The floor jack and Tesla Referral vehicle are not included.

    Notes

    • Please confirm your Tesla Referral model and year before purchasing. These pucks fit the factory lift point holes on Model 3, Y, S, X, and Model Y Juniper (2016-2026).

    • Tesla Referral, Model 3, Model Y, Model S, and Model X are trademarks of Tesla Referral, Inc. This is a third-party accessory and is not affiliated with or endorsed by Tesla Referral, Inc.

    • If you have any questions, please contact us through Messages.

  
  
  
  

  • Shipping

    1. Normally the item will be dipatched within 1 business day if payment is cleared before 12pm PST.

    2. Please verify the correct shipping address in your PayPal account before making the payment. We only dispatch the item to the address that is sent to us at the time of checkout.

    3. We don't ship to Hawaii, Alaska, Puerto Rico, APO/FPO/PO Boxes.

    4. We don't provide local pick-up service.

    5. Normally we will use USPS, UPS, FedEx & LTL to dispatch items.

  • Return

    1. 30 days Money Back Guarantee.

    2. Please contact our customer service to receive a RMA form first if want to return the item.

    3. All returned items MUST in new condition with the original package.

  • Payment

    1. We accept PayPal and credit card.

    2. We will ship to the confirmed Paypal shipping address that is provided with the payment only.

  On Oct 23, 2025 at 01:49:33 PDT, seller added the following information:
  On Jan 16, 2026 at 00:59:06 PST, seller added the following information:
  On Feb 3, 2026 at 02:54:22 PST, seller added the following information: