When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Specifications:
100% NewWarranty :1 yearFree Return:30 DayColor: Silver (as picture shown)
Placement on Vehicle: Exhaust side or intake side
Interchange Part Number:
15810-PRB-A03 15810-RAA-A01 15810-RAA-A02 15810-RAD-Y01
Fits for:
For 2003 - 2007 Honda Accord 2Dr Coupe
For 2003 - 2007 Honda Accord 4Dr Sedan
For 2002 - 2005 Honda Civic (Si Models Only)
For 2002 - 2009 Honda CR-V (All Models)
For 2003 - 2011 Honda Element (All Models)
For 2002 - 2006 Acura RSX (Base, L Models Only)
Please Double-Check that this is compatible with your vehicle.
Packing List:1x Solenoid Spool Valve W/gasket (as shown in the picture).
How to Replace the VTEC Solenoid:
Step 1: Removing the VTEC Solenoid.
Locate the solenoid on the backside of the engine, facing the firewall.Remove the 10mm bolts from the solenoid.
Disconnect the solenoid connector and pull the solenoid out.
Press the clips and remove them from the solenoid.
Disconnect the wiring harness with needle nose pliers.
Step 2: Installing the VTEC Solenoid.
Clean and wipe down the mating surface with a paper towel, place a tab of clean oil on the gasket.
Insert a bolt into the solenoid, insert the solenoid into place.
Tighten the three 10mm bolts.
Connect the wiring harnesses, and lip the harness into the solenoid.
On Jun 11, 2026 at 07:24:53 PDT, seller added the following information: On Sep 3, 2026 at 20:59:46 PDT, seller added the following information:
On Sep 29, 2026 at 23:52:12 PDT, seller added the following information:
