When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Electrically Conductive Silver Epoxy Window Defroster Glass Repair Kit 2.5 grams
This Atom Adhesives' Defroster and Antenna Repair Kit fixes the most common problems related to heated automotive glass. The kit includes:
two-partConductive Tab Repair Epoxy if an existing bed of solder is not on the glass, to bond the tabs onto the glass forming an electrical and
structuralconnection; Grid Repair for scratched or broken defroster lines; This handy kit pays for itself.
CURE SCHEDULE:24 hour@Room Temperature
TYPICAL APPLICATIONS:
- Busted Auto Parts-Glass
- New (1) Defroster Repair Kit
- Reattach separated defroster tabs
- Repair small cuts in line grid
- Quick easy repairs.
NOTE:
There are manyYouTubevideos that will visually guide you through this process.
WINDOW PREPARATION:
Begin the repair process by using your soft cloth and window cleaner to thoroughly remove all dirt, dust, dog drool, ice cream smears and greasyhandprintsfrom the rear window. Clean it inside andout because you needto be able to see through the glass to discern the breaches in the grid.Moreimportant, you need to give the conductive adhesive a clean surface to stick to.HOW TO REPAIR THE DEFROSTER TAB:
The tabs located along the sides of the defroster connect the defroster electrically to the vehicles defrost circuit. One tab is the positive and the other ground.
If a tab comes off the defroster this willmean total instantaneousfailure of the defroster.
1.Our kit is an epoxy adhesive. To use, carefully clean and dry all surfaces to be bonded from all dirt, dust, debris andhand-printsfrom the rear window.
2.Apply the completely mixed adhesive kit to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong,
reliable bonds; however,maintain contactwith a tape or similar for24 Hoursuntil the adhesive is completelycured. Please,wait 24 Hours
before using the defroster.
3.Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container
bethoroughly mixed prior to use.
4.Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of52°C for 30 minutes
prior to mixing components may benecessary.Crystallized epoxycomponents do not react as well as liquid components and should be re-dissolved prior to
use for best results.
BENEFITS:
- 1 year shelf life.
- Made in the USA.
- Instructions included.
- 2 part conductive silver adhesive.
- Made on demand and ships within 24 hours.
- Easy 1 to 1 mix ratio for multiple applications.
- Glue is specially formulated to conduct electricity.
- Anyone can fix a detached rear window defogger tab.
- Simply place the luer lock caps back on the syringes and re-use.
- Inexpensive - saves the cost of having a shop perform the repair.
See instruction for contained easy mixing.
Froo | Froo Cross Sell, Free Cross Sell, Cross promote, Marketing, listing Apps, Apps, Application
