When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
LAST CHANCE MOTO
Shoei X-Fifteen Helmet X-15 Escalate TC-2 Blue/Yellow SizeXS
LimitedOFFERFINAL OffersLowest PricesFast ShippingShoei X-15 Escalate Helmet
Shoei developed the X-15 with technologies born from racing with one mission in mind, to make the fastest riders on the planet even faster. By designing and refining the X-15 helmet in their state-of-the-art wind tunnel facility, Shoei was able to reduce drag by 6.1% and lift by 1.6% compared to it's predecessor the X-14. The X-15 features a Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell, a six-ply matrix of fiberglass with lightweight organic and high-performance fibers to provide optimal impact-absorption, strength and elasticity. Packed in the X-15's shell is a multitude of features fit for a pro and ready to boost your performance, safety and comfort.
Aerodynamic Shell Design
- Designed and refined in Shoei’s state-of-the-art wind tunnel facility
- 6.1% reduction in drag and a 1.6% reduction in lift compared to the X-14
- Over 150+ profile shape iterations enhance high-speed stability and reduce negative forces
- Rear stabilizer system, concave of the shell surface and pronounced edges on the top left and right sides of the helmet enhance aerodynamic performance
Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell
- Six-ply matrix of fiberglass with lightweight organic and high-performance fibers provide optimal impact-absorption, strength and elasticity
- Four shell sizes
Multi-Piece Multi-Density EPS Liner
- Optimized impact absorption thanks to varying densities of foam in key areas
- Precise placement of multi-density EPS liner material yields a more compact, lightweight design
- Strategically-located tunnels allow cooling air to travel unrestricted through the helmet
- Small channel in the front chin bar area strategically designed to guide and receive hydration systems (including the optional Shoei Hydration tube – sold separately)
Ventilation System
- Seven (7) closable air intakes and six (6) exhaust outlets
- Air intakes are strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet
- Ventilation tunnels in EPS liner enlarged to 10mm deep from 6mm in the previous model for superior ventilation
- Innovative cheek pad cooling system by increasing the number of holes delivering refreshing air to the rider’s cheek area
Field of Vision
- Revised eyeport trajectory from previous model increases the upper field of view by 5mm
- DKS-304 PINLOCK EVO lens system is 10% larger than its predecessor and improves lateral field of vision thanks to relocated pins outside of the eyeport
CWR-F2R Shield & Base Plate System
- Distortion-free face shield thanks to Shoei’s innovative 3D injection-molding process
- Protects against 99% of the sun’s damaging UV rays
- CWR-F2R 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility
- Vortex Generators on the sides of the shield improve aerodynamics and reduce wind noise
- Center locking mechanism helps to evenly distribute shield forces across both spring-loaded base plates
- Exclusive two-stage shield locking system - center locking mechanism plus racing shield lock
- Trigger lock mechanism prevents the shield from detaching during an impact or crash
3D Max-Dry Custom Interior System II
- 3D Max-Dry Custom Interior System II is fully removable, washable, adjustable and replaceable
- Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors
- Independently adjustable 3D center pad components can be replaced with optional thicknesses to customize the fit
- Each pocket-shaped pad has separate, removable layers that can be peeled away to further optimize the individual fit
- Patented angle adjustment mechanism allows you to change the position of the helmet by up to 4-degrees to increase the upper field of vision while tucked in extreme racing positions
- Surface area of the cheek pads has been enlarged by 16.5% from X-14 for a more secure and comfortable fit
Emergency Quick Release System (E.Q.R.S.)
- Emergency Quick Release System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet
Safety Certifications
- Snell M2025R
- ECE-22.06 certified
- DOT certified
FREE SHIPPING on all Delivery via UPS, USPS, or FedEx.
Our Guarantee: We are responsible for items lost or damaged during transit and will issue a full refund or replacement.
Orders ship from our warehouse (same-day or next business day) or a premium partner fulfillment center (up to 3 business days for processing and tracking to appear).
We ship fast and provide tracking promptly once available.
Check the estimated delivery date on this listing for NOW!
Payment
We accept payment by any of the following methods: PayPal Google Pay Visa MasterCard AMEX Discover
Please pay as soon as possible after winning an sale, as that will allow us to ship your item to you sooner!
Returns
International Shipping
If the product received is not as described in the listing, please contact LastChanceMoto to discuss a resolution within the 30-day return period.
We recommend verifying all part numbers and fitment information prior to purchasing. Please feel free to contact LastChanceMoto with any questions about the product fitment or condition prior to Reach: We ship to 200+ countries via 's International Shipping program.
Lowest PricesFinal OffersFast ShippingShoei X-15 Escalate Helmet Shoei developed the X-15 with technologies born from racing with one mission in mind, to make the fastest riders on the planet even faster. By designing and refining the X-15 helmet in their state-of-the-art wind tunnel facility, Shoei was able to reduce drag by 6.1% and lift by 1.6% compared to it's predecessor the X-14. The X-15 features a Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell, a six-ply matrix of fiberglass with lightweight organic and high-performance fibers to provide optimal impact-absorption, strength and elasticity. Packed in the X-15's shell is a multitude of features fit for a pro and ready to boost your performance, safety and comfort. Aerodynamic Shell Design ---Designed and refined in Shoei’s state-of-the-art wind tunnel facility ---6.1% reduction in drag and a 1.6% reduction in lift compared to the X-14 ---Over 150+ profile shape iterations enhance high-speed stability and reduce negative forces ---Rear stabilizer system, concave of the shell surface and pronounced edges on the top left and right sides of the helmet enhance aerodynamic performance Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell ---Six-ply matrix of fiberglass with lightweight organic and high-performance fibers provide optimal impact-absorption, strength and elasticity ---Four shell sizes Multi-Piece Multi-Density EPS Liner ---Optimized impact absorption thanks to varying densities of foam in key areas ---Precise placement of multi-density EPS liner material yields a more compact, lightweight design ---Strategically-located tunnels allow cooling air to travel unrestricted through the helmet ---Small channel in the front chin bar area strategically designed to guide and receive hydration systems (including the optional Shoei Hydration tube – sold separately) Ventilation System ---Seven (7) closable air intakes and six (6) exhaust outlets ---Air intakes are strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet ---Ventilation tunnels in EPS liner enlarged to 10mm deep from 6mm in the previous model for superior ventilation ---Innovative [cheek pad] cooling system by increasing the number of holes delivering refreshing air to the rider’s cheek area Field of Vision ---Revised eyeport trajectory from previous model increases the upper field of view by 5mm ---DKS-304 PINLOCK EVO lens system is 10% larger than its predecessor and improves lateral field of vision thanks to relocated pins outside of the eyeport CWR-F2R Shield & Base Plate System ---Distortion-free [face shield] thanks to Shoei’s innovative 3D injection-molding process ---Protects against 99% of the sun’s damaging UV rays ---CWR-F2R 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility ---Vortex Generators on the sides of the shield improve aerodynamics and reduce wind noise ---Center locking mechanism helps to evenly distribute shield forces across both spring-loaded base plates ---Exclusive two-stage shield locking system - center locking mechanism plus racing shield lock ---Trigger lock mechanism prevents the shield from detaching during an impact or crash 3D Max-Dry Custom Interior System II ---3D Max-Dry Custom Interior System II is fully removable, washable, adjustable and replaceable ---Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors ---Independently adjustable 3D center pad components can be replaced with optional thicknesses to customize the fit ---Each pocket-shaped pad has separate, removable layers that can be peeled away to further optimize the individual fit ---Patented angle adjustment mechanism allows you to change the position of the helmet by up to 4-degrees to increase the upper field of vision while tucked in extreme racing positions ---Surface area of the cheek pads has been enlarged by 16.5% from X-14 for a more secure and comfortable fit Emergency Quick Release System (E.Q.R.S.) ---Emergency Quick Release System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet Safety Certifications ---Snell M2025R ---ECE-22.06 certified ---DOT certified
LAST CHANCE MOTO
Shoei X-Fifteen Helmet X-15 Escalate TC-2 Blue/Yellow SizeXS
LimitedOFFERShoei X-15 Escalate Helmet
Shoei developed the X-15 with technologies born from racing with one mission in mind, to make the fastest riders on the planet even faster. By designing and refining the X-15 helmet in their state-of-the-art wind tunnel facility, Shoei was able to reduce drag by 6.1% and lift by 1.6% compared to it's predecessor the X-14. The X-15 features a Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell, a six-ply matrix of fiberglass with lightweight organic and high-performance fibers to provide optimal impact-absorption, strength and elasticity. Packed in the X-15's shell is a multitude of features fit for a pro and ready to boost your performance, safety and comfort.
Aerodynamic Shell Design
- Designed and refined in Shoei’s state-of-the-art wind tunnel facility
- 6.1% reduction in drag and a 1.6% reduction in lift compared to the X-14
- Over 150+ profile shape iterations enhance high-speed stability and reduce negative forces
- Rear stabilizer system, concave of the shell surface and pronounced edges on the top left and right sides of the helmet enhance aerodynamic performance
Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell
- Six-ply matrix of fiberglass with lightweight organic and high-performance fibers provide optimal impact-absorption, strength and elasticity
- Four shell sizes
Multi-Piece Multi-Density EPS Liner
- Optimized impact absorption thanks to varying densities of foam in key areas
- Precise placement of multi-density EPS liner material yields a more compact, lightweight design
- Strategically-located tunnels allow cooling air to travel unrestricted through the helmet
- Small channel in the front chin bar area strategically designed to guide and receive hydration systems (including the optional Shoei Hydration tube – sold separately)
Ventilation System
- Seven (7) closable air intakes and six (6) exhaust outlets
- Air intakes are strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet
- Ventilation tunnels in EPS liner enlarged to 10mm deep from 6mm in the previous model for superior ventilation
- Innovative cheek pad cooling system by increasing the number of holes delivering refreshing air to the rider’s cheek area
Field of Vision
- Revised eyeport trajectory from previous model increases the upper field of view by 5mm
- DKS-304 PINLOCK EVO lens system is 10% larger than its predecessor and improves lateral field of vision thanks to relocated pins outside of the eyeport
CWR-F2R Shield & Base Plate System
- Distortion-free face shield thanks to Shoei’s innovative 3D injection-molding process
- Protects against 99% of the sun’s damaging UV rays
- CWR-F2R 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility
- Vortex Generators on the sides of the shield improve aerodynamics and reduce wind noise
- Center locking mechanism helps to evenly distribute shield forces across both spring-loaded base plates
- Exclusive two-stage shield locking system - center locking mechanism plus racing shield lock
- Trigger lock mechanism prevents the shield from detaching during an impact or crash
3D Max-Dry Custom Interior System II
- 3D Max-Dry Custom Interior System II is fully removable, washable, adjustable and replaceable
- Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors
- Independently adjustable 3D center pad components can be replaced with optional thicknesses to customize the fit
- Each pocket-shaped pad has separate, removable layers that can be peeled away to further optimize the individual fit
- Patented angle adjustment mechanism allows you to change the position of the helmet by up to 4-degrees to increase the upper field of vision while tucked in extreme racing positions
- Surface area of the cheek pads has been enlarged by 16.5% from X-14 for a more secure and comfortable fit
Emergency Quick Release System (E.Q.R.S.)
- Emergency Quick Release System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet
Safety Certifications
- Snell M2025R
- ECE-22.06 certified
- DOT certified
BUY NOW!
FREE SHIPPING on all Delivery via UPS, USPS, or FedEx.
Our Guarantee: We are responsible for items lost or damaged during transit and will issue a full refund or replacement.
Orders ship from our warehouse (same-day or next business day) or a premium partner fulfillment center (up to 3 business days for processing and tracking to appear).
We ship fast and provide tracking promptly once available.
Check the estimated delivery date on this listing for style=\"text-align:justify\">
If the product received is not as described in the listing, please contact LastChanceMoto to discuss a resolution within the 30-day return period.
We recommend verifying all part numbers and fitment information prior to purchasing. Please feel free to contact LastChanceMoto with any questions about the product fitment or condition prior to Reach: We ship to 200+ countries via 's International Shipping program.
Payment
Fast Shipping
We accept payment by any of the following methods: PayPal Google Pay Visa MasterCard AMEX Discover
Please pay as soon as possible after winning an sale, as that will allow us to ship your item to you sooner!
Final OffersLowest Prices
Returns
Shoei X-15 Escalate Helmet
Shoei developed the X-15 with technologies born from racing with one mission in mind, to make the fastest riders on the planet even faster. By designing and refining the X-15 helmet in their state-of-the-art wind tunnel facility, Shoei was able to reduce drag by 6.1% and lift by 1.6% compared to it's predecessor the X-14. The X-15 features a Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell, a six-ply matrix of fiberglass with lightweight organic and high-performance fibers to provide optimal impact-absorption, strength and elasticity. Packed in the X-15's shell is a multitude of features fit for a pro and ready to boost your performance, safety and comfort.
Aerodynamic Shell Design
- Designed and refined in Shoei’s state-of-the-art wind tunnel facility
- 6.1% reduction in drag and a 1.6% reduction in lift compared to the X-14
- Over 150+ profile shape iterations enhance high-speed stability and reduce negative forces
- Rear stabilizer system, concave of the shell surface and pronounced edges on the top left and right sides of the helmet enhance aerodynamic performance
Multi-Ply Advanced Integrated Matrix Plus (AIM+) Shell
- Six-ply matrix of fiberglass with lightweight organic and high-performance fibers provide optimal impact-absorption, strength and elasticity
- Four shell sizes
Multi-Piece Multi-Density EPS Liner
- Optimized impact absorption thanks to varying densities of foam in key areas
- Precise placement of multi-density EPS liner material yields a more compact, lightweight design
- Strategically-located tunnels allow cooling air to travel unrestricted through the helmet
- Small channel in the front chin bar area strategically designed to guide and receive hydration systems (including the optional Shoei Hydration tube – sold separately)
Ventilation System
- Seven (7) closable air intakes and six (6) exhaust outlets
- Air intakes are strategically shaped and located to maximize airflow and negative air pressure suction to the rear of the helmet
- Ventilation tunnels in EPS liner enlarged to 10mm deep from 6mm in the previous model for superior ventilation
- Innovative cheek pad cooling system by increasing the number of holes delivering refreshing air to the rider’s cheek area
Field of Vision
- Revised eyeport trajectory from previous model increases the upper field of view by 5mm
- DKS-304 PINLOCK EVO lens system is 10% larger than its predecessor and improves lateral field of vision thanks to relocated pins outside of the eyeport
CWR-F2R Shield & Base Plate System
- Distortion-free face shield thanks to Shoei’s innovative 3D injection-molding process
- Protects against 99% of the sun’s damaging UV rays
- CWR-F2R 2D “flat” outside surface combined with 3D technology inside offers an aggressive look with optimized visibility
- Vortex Generators on the sides of the shield improve aerodynamics and reduce wind noise
- Center locking mechanism helps to evenly distribute shield forces across both spring-loaded base plates
- Exclusive two-stage shield locking system - center locking mechanism plus racing shield lock
- Trigger lock mechanism prevents the shield from detaching during an impact or crash
3D Max-Dry Custom Interior System II
- 3D Max-Dry Custom Interior System II is fully removable, washable, adjustable and replaceable
- Max-Dry liner material absorbs and dissipates sweat and moisture twice as fast as traditional nylon interiors
- Independently adjustable 3D center pad components can be replaced with optional thicknesses to customize the fit
- Each pocket-shaped pad has separate, removable layers that can be peeled away to further optimize the individual fit
- Patented angle adjustment mechanism allows you to change the position of the helmet by up to 4-degrees to increase the upper field of vision while tucked in extreme racing positions
- Surface area of the cheek pads has been enlarged by 16.5% from X-14 for a more secure and comfortable fit
Emergency Quick Release System (E.Q.R.S.)
- Emergency Quick Release System that allows emergency medical personnel to easily remove the cheek pads from an injured rider’s helmet
Safety Certifications
- Snell M2025R
- ECE-22.06 certified
- DOT certified
