Solid Carbide Boring Bar 1/2\" x 5.50\" C08-SCLCR2 (For CCMT 21.51) USA For Sale

For CCMT21.51 Caroffere Inserts 1/2\" x 5.50\" Solid Caroffere Boring Bar C08-SCLCR2
Free shipping This is a high-quality knife holder made entirely of tungsten steel
C08-SCLCR2 1/2\"x 5.50\" OAL (CCGT 21.51) solid caroffere non-coolant. NOTE: Actual shank length may be between 5.00\" and 5.50\" OAL. Min Bore .590\" When internal machining, the limiting factor on CNC turning centers or multi-task machines is often the rigidity (or lack thereof) of the boring bar. It is important to note that a caroffere shank is nearly 3X more rigid than a traditional steel shank. While in the cut the steel shank deflects (pushes-off), even more so when extended beyond 3:1 (L/D) and when threading, machining difficult materials or interrupted cuts. This often results in poor surface finish, size variation, poor tool life and reduced machine utilization. The rigid shank minimizes vibration and can eliminate chatter. Tool life is preserved, resulting in fewer offset adjustments and insert indexes. Greater rigidity allows for parameter adjustments (speeds/feeds) to optimize cycle times. In a nutshell, your rigid shank will pay for itself over and over again, day in and day out. Reduced setup time (due to elimination of chatter), higher quality parts, less scrap, longer run times. Greater machine utilization and production means more $$$$ in your pocket at the end of the day. There are better models of CCGT series blades equipped for this tool holder outside Compared to CCMT, CCGT series blades have more precise grinding, which will have better cutting effects on your products
The service life has been increased, and it can better adapt to the high-quality tool holder you have purchased The package includes： 1PCS 1/2\" Solid Caroffere Boring Bar