Toyota Sienna Universal Tablet Mount 2021-2024 For Sale

Below are the supported vehicles and links to installation videos . If your vehicle isn\'t on the list and you\'d like to inquire compatibility, you MUST send us a clear photo of your head unit. Failure to so will result in no response. Do NOT send a google image of your vehicle dashboard. Thank you for your understanding.

Supported Vehicles2021-2024 Sienna as long as the head unit is the same EXACT one as the first photo.
The bases go on the areas marked in red, and the stabilizer on the area marked in yellow. DO NOT install these components any other way.DO NOT PURCHASE IF YOUR VEHICLE IS NOT LISTED ABOVE

About SPD Mount

This is our newly redesigned STM (Seamless Tablet Mount) V2 also known as SPD Mount. It is built better, with a smaller main board that fits smaller tablets better. The new main board will now work across all supported vehicles.

If you switch vehicles and your new vehicle is supported by our mount, you may need to purchase a compatible set of bases for the new vehicle.

Used and refurbished kits will remain V1.

Quick & Easy Installation Kit

This kit comes partially assembled, and can be installed in just 2–5 minutes after you watch the installation videos.

Everything required for installation is included, along with extra pieces of double-sided tape in case of mistakes during installation or for reuse in other vehicles.

Orders ship within 2 business days and arrive within 2–5 business days for domestic buyers.
For international buyers, the delivery time can vary.

Watch These Video align=\"left\">Installing The align=\"left\">Installing The align=\"left\">Installing The Back STM parts are fully assembled and inspected by hand; therefore, minor aesthetic imperfections or scratches WILL be present on glossy parts and other components. These flaws do not affect product functionality. You may return your order for any reason under the return policy conditions. Review our return policy for more information.RETURN POLICY

We want you to be satisfied with your purchase. If you are not, you may return the order for any reason under the following conditions:

Return Window
You may initiate a return for any reason within 4 calendar days of delivery.
Return shipping costs are the buyer’s responsibility unless the item is defective, or the wrong item was sent. Once we confirm the return, you will have 4 business days to ship the order back.

If not shipped within the given 4 business days, each additional calendar day will incur a late fee of $40 for orders of $145 and higher, and $20 for orders of $40 and higher.

If these late fees surpass the cost of the item being returned, the return will no longer be accepted and the buyer must keep the product. If the buyer still persists in sending us the order back, the refund will not be issued and the item will not be sent back to the buyer.

Summary: You can initiate a return within 4 calendar days, and ship the order back within 4 business days.

Condition of Returned Items

Items that are unopened or returned with minor scratches, chips, leather marks less than 0.3 inch, will not be subject to additional fees.

Items returned withleather marks (exceeding 0.3 inch)not caused by our shipping will incur aminimum $60 refurbishment fee, deducted from the refund.

Items must be returned with all original parts except the pre-installed double-sided tapes.

Refund Processing
Refunds are issued to the original payment method within 2 business days after inspection.

How to Initiate a Return
To receive return instructions, please contact us, and indicate whether you will be shipping the item yourself, using the carrier and shipping speed of your choice, or if you would like us to send you a prepaid USPS Priority return label, which will be deducted from your full refund.

Disclaimer / Limitation of Liability

By using our website and purchasing our car-mount products, you agree to the terms outlined in this Disclaimer.

General Use
Our products are designed for everyday consumer use. However, improper installation, modification, or misuse may lead to product failure or unsafe conditions. It is the customer’s responsibility to follow all installation instructions and safety guidelines provided.

Not Responsible for Misuse
We arenot responsible for any damage, injury, or lossresulting from:

• Incorrect installation
• Improper use of the product
• Modifications to the product
• Use of the product in ways not intended or recommended
• Failure to follow instructions or local laws regarding device mounting while driving

Driving Safety
Drivers must ensure that any mounted device does not obstruct visibility or interfere with safe vehicle operation. Customers are fully responsible for using the productin a safe and legal manner.

Limitation of Liability
To the fullest extent permitted by law, we disclaim all liability for:

• Personal injury
• Property damage
• Loss of data, device damage, or any other indirect or consequential losses

Our maximum liability, if any, is limited to the purchase price of the product.

Changes to This Disclaimer
We may update this Disclaimer from time to time. The updated version will be posted on this page with a revised “Last Updated” date.

Contact Us
For questions regarding this Disclaimer, please contact us

How To Properly Use STM
1- The Hinges

Hinges of new and refurbished products are covered by a 3-year limited warranty or up to five hinge replacement pairs, whichever comes first.

STM uses a customized hinge in order to sustain high heat; as a result, some concessions had to be made. As of today, the type of friction hinge required for a mouting system like STM currently does not exist anywhere in the world for consumers: high heat resistant, adjustable torque between 0 and 2.5 NM, 10,000 cycles before an attenuation of about 30 per cent.

The current hinge was thoroughly tested in the summer heat with no issues. If you experience a decrease in friction, simply tighten both hinges slighlty.

The current hinge has been tested for about 1000 cycles before attenuation. The hinges will eventually fail depending on the frequency of use; however, the life expectancy of the hinges can be significantly extended by spraying dry PTFE lube directly onto the hinges when they start making squeaky noises. This will happen with one hinge at a time. Cover your headunit with cloth when spraying the hinge, as dry PTFE lube can be very hard to remove once set. Immediately clean any excess lube from the hinge and other areas of your vehicle.

DO NOT:

• Leave the tablet mounted in a parked/locked car on warm/hot days (the cabin temperature is always higher than the outside temperature).
• Mount more than 5 lbs total weight (tablet and accessories).
• Overtighten the hinges, otherwise, you will strip the screws.
• Move the mount up and down rapidly multiple times in a row; this can overheat the hinges.
• Set the friction of one hinge considerably lower than the other.
• Tighten only one hinge and leave the other completetly loosen (NEVER DO THIS).
• submerge in water.

2 – The Main Board

Before installing the kit,avoid handling the main board near metal objects with magnetic property (keys, bolts, tools, etc.), andkeep it far away from children.

The main board contains the highest grade of neyodinium magnets (N52).Neyodinium magnets are fragile and easy to break when not handled properly. Every kit contains the tool to open the board (DoNOTopen the board unless instructed by customer support).

The tool to remove the 2 brackets from the back of the main board when needed (when switching vehicle) is included in the kit; though, using a kitchen knife is faster. Make sure the main board is always on its horizontal side when removing the 2 brackets. The main board can be cleaned with a towel and water.

DO NOT:

• Attempt to open the board unless instructed by customer support. This is realistically the only way the magnets can get damaged. Damages to magnets caused by user will NOT be covered under warranty.
• Bend.
• Place on vertical side when removing the 2 brackets on the back. Horizontal always.
• Customize the main board in a way that’ll decrease or increase its thickness (NEVER DO THIS).
• Use any other types of magnet before contacting us, even if the magnets are identical in look.
• Bring metal object with magnetic property close to the board when it’s not holding a tablet
• The main board can be cleaned with a towel and water. DO NOT submerge the board into water.

3 – Double Sided Adhesive

STM uses 2 types of adhesives, 3M 5952 for the main board (3M 5952 is always black and 1.1 mm thick), and 1 mm thick acrylic nano tape (any brand) for all other parts. Alternatively, the stabilizer (SB) can use 0.5 mm thick nano acrylic. In the case of mounts with cutouts (i.e. 2022 Toyota Camry), please use a blade to shape the adhesive for a good fit. It does NOT need to be perfect.

DO NOT:

• Use any other thicknesses (NEVER DO THIS)

4 – Safety

STM exists to make driving experience better and safer. Be mindfull of others on the road, and do not consume visual media while driving. STM is made of aluminium (anodized, and powder coated), stainless steel 304, low carbon steel/mild steel, polymers (ABS. acrylic, PVC leather). It is buyer’s responsability to make sure they are not alergic to these materials.

DO NOT:

• Operate the vehicle with the mount lifted, unless reversing.
• When not installed in a car or other environments, do not leave the mounting system near children

Contact Us
If you have questions, please contact us at

Compatibility inquiries about your vehicleMUSTinclude a clear photo of the head unit to receive a response. Please do not send us a photo from Google or elsewhere.