When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This updated non-biodegradeable harness is 100% rewrapped to look as new as possible without paying the new harness price!
Be aware the ETA (throttle body) and lower engine harness includes starter, starter solenoid, oil pressure and oil level also have defective wiring insulation. The throttle body can be rebuilt (check ) with updated wiring ALSO I manufacture a easy to install lower repair harness that only repair the defective wiring -see my other listings!
October 2023,I had another buyer purchase the wrongharness, look at the attached pictures and contact me if you have any doubts.
All of the harnesses I sell are cleaned, inspected, repaired, connectors replaced as needed, rewrapped as needed and then checked for continuity,and I think it looks as close as possible to new.
STOP - STOP - STOPThis harness is my #1 problem selling on .
Early 1993 / 1994 have a ROUND temp sensor connector on the side of the thermostat housing in the pictures,ThisDOESfit!
Late 1994 / 1995 have a SQUARED 4 pin temp sensor connector on the top of the thermostat housing, like the one in pictures.ThisDOESNOT fit.
If you have ANY doubts on which harness you need send me a picture of your wiring connectors at the thermostat housingBEFORE buying.
Also checkthe condition ofYOURwiring insuation at the front of your engine, many people have bought harnesses when their's was already updated!
People incorrectly have bought this 5632 part number when they actually needed a 2933 harness over 25 times since 2017.You Need To Check Your Old Part Tag Number Before Buying!!Do notrely on your VIN #orthe dealer for your correct part number, I have had them give thewrongpart number to people MANY times!!!There may be a black plastic cover over the ECU's in back of the battery- see picture
The part number tag is about 18-24" back from the ecu connector on a small 2 wire pigtail by the small connector on the end(see picture where I'm pointing to it)
May 2015 Update:Over 8 people have ran into this problem since then. Nobody likes getting the wrong part, I even had one MB mechanic use a e320 part number to replace a 1992 e400 harness.I was originally ASE certified as a automotive electrician in 1984, (actually way over 30 years automotive wiring/electronic experience).
How much experience does the other sellers have?This harness is used on some late 1994 and most 1995 cars, but you must check the part number on your old wiring first to confirm,DO NOT trust Mercedes parts catalog or dealer, they can use either Part number 124 440 2933 or 124 440 5632 and they are not interchangeable..And yetanother customer use their VIN to find the harness they needed through the MB dealer, they were wrong again 6/2/14.This listing is for a reconditioned updated Mercedes e320 engine wiring harness and fits Part number 124 440 56 32This listing includes free email and/or telephone support for removal and installation questions. - sorry support is for my customers only!Installation hint:on 2933 / 5632 harnesses, use wd40/liquid wrench on coil cover plate allen screws on top of valve cover at least a day before removal.This harness has a production date After January 1 1997, photo is a stock picture of mine, not actual item.Any broken or missing connectors are replaced, wiring is inspected for cracks (not likely on updated harnesses) this wiring is flexible, repaired as neededand thenrewrapped to look like new.If you need the long black plastic cover over the harness contact me before buying, I no longer include it.Do not use a used harness with a production date older than 1996, they have the same eco-junk / biodegradable wiring!You may need to replace the lower engine harness (I have none available, but they only need a few wires and can be easily built) and the ETA electronic throttle actuator, as they use the same biodegradable wiring.If you do need a 1244402933 harness, or ETA, check my other listings, or email me, I usually have one.All harnesses are shipped signature required, and include a nonremovable serial numbered sticker.I may not ship this harness until you confirm that you personally checked your old part tag number!1 year exchange only warranty. No returns.