When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ITEM DESCRIPTION
Get your vintage Pioneer turntable off its belly and back on its feet with these original equipment inspired replicas! Designed to look like the original feet. However, instead of outdated rubber and springs for isolation, these replicas are designed with Thermoplastic polyurethane (TPU)! TPU is rubbery and flexible and can return to its original shape after being deformed. This makes it ideal for turntable suspension and vibration reduction.
A little background... I'm a vintage electronics guy and personally own a Pioneer PL-518 along with other Pioneer gear like the SA-8500 II (integrated amp), the SG-9500 (equalizer), RT-707 and RT-909 (reel to reel tape decks). The problem with my PL-518 (and yours too I'm sure) was that the rubber support for the feet had rotted out a long time ago (couldn't even find the springs). I was tired of my low riding turntable (not to mentioned the scratches on my table due to the protruding screws on the bottom of the pan) so I ordered some replacement feet but was underwhelmed. They didn't match the style or elevate the turntable to the same height as the originals and just didn't seem to have that 'wow' factor. So, I designed my own.
This is my third version, now with an all TPU construction. This allows for a simpler manufacturing process and better vibration absorption qualities. The one piece manufacturing process cost less and allows me to pass savings onto you!
MADE IN THE USA!
Design and manufactured in Largo, Florida.
COMPATIBILITYBased on my research these feet would be a direct replica replacement for the following Pioneer turntable likely work for other turntable manufacturers and models as well. See photos for dimensions to determine compatibility. If you have any questions, please ask!
WHATS INCLUDED
4 - Replica Feet4 - Stainless steel screws (for use if original screws are missing)The turntable shown in the photos is not included (its my personal PL-518).
INSTALLATION (simple as 1, 2 ,3)
1. Remove old feet parts and screws.2. Attached the new feet with your existing (or supplied) screws.3. Stand back and observe your turntable returned to its original glory!THANK YOU!I know you have a lot of buying options and appreciate you taking the time to consider my listing (and reading all the way to the bottom). - Sean
