When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description:
Name: PTFE Tube
Material: White
Size: Inner Diameter X Outer Diameter
Inner Diameter：0.6mm-5mm
● Temperature Resistance Range：-190 ℃ ~ +260 voltage ：19 Kv/mm
●Shore hardness friction (Polytetrafluoroethylene) is a synthetic fluoropolymer of tetrafluoroethylene.
PTFE tubing ffers the ultimate in temperature and chemical resistance of any polymeric ubing, and is easily cut, ited, machined,and routed.PTFE tubingi the logical choicefor the most aggressive chemical systems, where high temperaturesare the norm, or where chemical purty and inertes are esental. Being selflubrcatg this tubing fers the lowest oeficient ofiction of any Temperature Resistance： Working Temperature Up To 260 ℃
2.Low Temperature Resistance： Good Mechanical Toughness, -196 ℃ Can Maintain An Elongation Of 5%
3.Acid And Alkali Resistance：For Most Chemicals And Solvents, It Exhibits Inertness, Strong Resistance To Acid And Alkali, Water, And Various Organic Solvents
4.Climate Resistance：Has A Better Aging Life Among Plastics
5.High Lubrication：It Refers To The Lower Friction Coefficient Among Solid Materials
6.Non Adhesive：Refers To The Small Surface Tension In Solid Materials, Which Does Not Adhere To Substances
7.Good Quality：With Physiological Characteristics, Allowing You To Buy With Peace Of Mind And Use With Peace Of Mind
8.Good Insulation：Can Withstand 1500 Volts Of High Voltage tubes have the following resistance: It has excellent corrosion resistance and can withstand various strong acids, strong bases, and other chemical solvents, suitable for applications that handle corrosive media.
2.High temperature resistance: PTFE material has excellent high temperature resistance and can operate for a long time at extremely high temperatures without degradation or deformation.
3.Low friction coefficient: It has an extremely low friction coefficient and a smooth surface, which reduces the flow resistance of fluid inside the pipeline.
4.Electrical Insulation: PTFE material has excellent electrical insulation properties and is suitable for applications that require electrical insulation protection.
5. Good non adhesiveness: The pipe wall does not adhere to any residual substances.
6. Low water absorption: The water absorption rate is less than 0.01%.
7. Flame retardancy: Will not burn in air, with an oxygen index greater than 95.
Scope of application：
Mainly used as conveying pipes, lining pipes, heat exchanger pipes, level gauge pipes for corrosive liquids and gases, and as protective cables and electrical components at various frequencies.
