When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
US WAREHOUSE , FAST DELIVERT TIME
Order included :
1*3 Axis Digital Readout DRO RPM Readout ( Hall Sensor included )3 * Standard linear scale 12inch 16inch 36inch Travel length 1* User manual
1* US Plug All of installation accessory are included (Dust cover ,mounting plate ,bracket ,little wiring ...)Linear Scale :
LO =Travel length
Cross Section :20.5X31mm
Total length =travel length +133mm
DC10-320mm (12inch travel length )
DC10-420mm(16inch travel lenght )
DC10-920mm (36inch travel length)
●Voltage Dissipation:15W
●Working Display:2,3,4,5Axis
●Operating Keypad:Mechanical Keypad
●Input Signal:5V TTL
●Input 5μm，10μm，50μm
●Saving the drawing function,the DRO allows to save the drawings into the system which makes the machining to be much more convenient.
● Special previewing the drawing function,after setting well the parameters,the DRO will display the machined well effect which makes the operating be more visual.
● Displaying the tool’s current position function,during the machining,the system will display the tool’s current position according to the drawing
which makes the machining be much more easier.
● Help function,during the machining,if there is any doubt,pressing the help button will help you to solve.
●Custom settings for the shortcut keys,operator can set the shortcut keys according to his operating habit.
Value Inputting
Metric and Imperial Switching
Power off or Linear)
Linear Compensation,Non-linear Coordinate
200 sets of SDM Coordinates
REF Centering
PLD Function
PCD Function
Simple R function
Smooth R Function
Radius/Diameter switching
Axis summing
Digital Filtering Function
Taper Measuring Function
Bevel Function
Rectangle Chambering Function
Rotational Speed Measurement
Linear Measuring Basing Rotary Encoder
16 sets of Tool Memory
Dynamic Graphics
Preview Drawing
●Measuring Length:50-1100mm
● Resolution:5μm，
●Output Signal:5V TTL
●Cross Protection:IP55
●Max. Moving Speed:60M/Min
●Reference Point:Every 50mm
![Bridgeport DRO 9X49Table3 Axis Digital Readout 12\](img-large/g/vQwAAOSwruJiznpy/s-l1600/Bridgeport-DRO-9X49Table3-Axis-Digital-Readout-12-.jpg "Bridgeport DRO 9X49Table3 Axis Digital Readout 12\")
