When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This adaptor is not submerged in clear epoxy, instead, it is encased in a sealant composite plus heatshrink, proofing it against moisture and dirt damage (but do not try to submerge it in water or sand, the clear epoxy one will also not do so well in those conditions).
The adaptor is more compact in size due to the USB port being attached directly to the circuit board. It is soldered very securely to it and reinforced. If you wish for a flexible connection between PC usb port and the adaptor, you can use a USB extension cable.
The adaptor has the identical Silicon Labs CP210x chipset, so the original instructions from Carrier on driver installation fully apply.
With this purchase you will get the USB-L adapter, Rnet cable, and a USB drive.
USB drive has the field assistant 8.5 on it, expiration date of which is April 30th, 2025.
So in total, you will get:- USB-L tool (USB 2.0 to 3 port Rnet comm)- Rnet cable (length of which is little over 6 feet and 4 inches). If you need a different length of Rnet cable (with green female connector and brown/red female connector), let me know and I will make it of the desired length. Color of the cable itself may vary unless you get the one in photos.
on USB flash drive:
- Field Assistant 8.5- Equipment Builder 8.5- Lonworks Integration Tool 8.5- Snap 8.5- Third-Party BACnet Utility 8.5- ViewBuilder 8.5- Virtual BACView 8.5-Test & Balance 8.5-AppLoader 8.5
Also included are earlier versions of the following (in case they might be needed for compatability):
- AppLoader 8.0- AppLoader 6.5- Virtaul BACView 6.5
