When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Do you have the tried and true, Trusty, TRUELY, Low Profile, Long Reach, 2 Ton Harbor Freight / Pittsburgh Automotive Jack? This Floor Jack to my knowledge came in 2 different part numbers for the same item 62310 and 68050
Are your seals leaking? from the nose cone? from the ram pump pistons? of the body of the hydraulic pump? Well I have the solution for you!I have a 7 piece (1 nose seal, 2 small ram seals, 2 large ram seals, and 2 reservoir pump body seals) kit of seals to rebuild the pump of your jack . We all love how low profile this jack is, and the New replacement is no longer 2-5/8\" low. Its 3-1/4\". almost 3/4\" taller. The 3/4\" of an inch really makes a difference. Or at least that what she said!
This kit will work on ONLY the unit I have shown in the pictures. Please check to make sure your pump is the same size as the one I have shown. I have attached pictures of the bolt hole size. The width of the pump which is 6.5 inches. The length of the pump From back of the pump to the front of the nose is 7 inches. From back of the pump to the end of the reservoir body is 6 inches. It may work on other hydraulic pumps in other floor jack makes/models but I can only confirm it works on these 2 part numbers. Please verify that your hydraulic pump is the same size, style, and look as what I have shown in the images. I have upgraded the reservoir/body seals of the pump to Teflon seals. They are a 1 time use, once it makes contact, they are done. These Teflon seals also fit very snug. You will have to stretch them on but once they are on it will seal. So make sure you have everything lined up before tightening the nose cone down. I have also included harder durometer o rings for the nose and both pump ram pistons. They are better under pressure and for high repeated use.
I am not liable for damage of the seals for improper installation, if you don\'t know how to do it. Please consult a professional.AGAIN, I am not responsible if the seals do not match yours. I am providing the seals that are a KNOWN working replacement for this particular pump / floor jack
