When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This listing contains all the German tanks, cars, trucks, self-propelled guns (SPG), cannons, weapons, landing craft, and and amphibious vehicleswe are authorized to sell by Wargame3D.
All miniatures are 3D printed with a gray ABS-Like resin (flexible to help reduce breaks) using a 16k resolution printer and are supplied unassembled and unpainted. You can see the superior quality and detail in the test prints shown within the listing. Some modeling experience is suggested; you may need to file some areas where supports were attached and will need glue to attach pieces.
- Vehicles are scaled down based on the initial1:56th scale model. This means the models are scaled down to around 56%. - Typically, models are scaled to as close to 1:100th scale possible, usually based on the length or width of the vehicle, so the exact scaling may vary from 56%.- Vehicles are printed hollowed out. Whenever possible, holes are hidden underneath the turret or behind the tracks. Otherwise holes will be printed underneath the hull.- Tanks are printed WITHOUT the crew and hatches closed - Reach out if you want an open hatch with crew.- Miniatures are UNPAINTED; Image shows painted miniatures for display only
- Wargame3D Pictures are included to show the initial design.
Preparation- Major supports are REMOVED; there may be small supports still attached, which may require small tweezers to remove.- Supports may still be attached to provide additional strength during shipping if a piece is prone to breaking.
Clean Up- Models should arrive ready to be primed, as they are pre-cleaned in isopropyl alcohol (IPA) and cured for a couple minutes post processing.- However, it is not unusual for a model to arrive slightly tacky (uncured resin). If this is the case, 1) lightly scrub the models in IPA, 2) let dry, 3) place models in the sun for a couple minutes to complete the curing.
*Caution: there are lots of small, fragile pieces, so this is not recommended for young children.
Have an issue with the order? Please reach out and I will work to make resolve the issue!
