When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
msrca
- Visit Shop
- Favoris
- newsletter
PRODUCTS ABOUT US
16 Row Aluminum Trans Engine Oil Cooler Kit Universal AN10 Air Guide Fittings
All modifications must be installed by licensed mechanics and in compliance with your local modification for most cars, may requires additional accessories to meet the needs of the particular application. Please ensure enough space for 16-Row Oil Cooler Kit
Material: Aluminum
Style: English Style
Oil Cooler Inlet/Outlet Size: AN-10
Corner Brace Thickness: 3mm
Fitting Adapters: 2*AN10 Female to AN8 Male; 2*AN10 Female to AN6 Male
Oil capacity:0.35L
Test pressure:0.7-0.8Mpa≈101-116psi
Burst included:
1*16-Row Oil Cooler
2*AN10 Female to AN8 Male fitting adapters
2*AN10 Female to AN6 Male fitting adapters
1*Air Guide Kit
1*Corner Brace Kit
(As Shown in the Picture)
Feature:
1. The oil cooler is made of high quality aluminum, and it is powder-coated and oxidized which can protect the product and be more durable.
2. This oil cooler kit is efficient to cool the oil temperature, and it can keep the oil at a suitable operating temperature to improve engine performance. It can also help to prolong the life of oil and the internal engine components.
3. The oil cooler kit includes a air guide kit, which can make the contact area between the air and the oil cooler greater. Thus it can reduce the oil temperature more effectively.
4. The air guide kit’s top cover and base plate can be interchanged to achieve either a left-facing or right-facing air intake. You can choose the orientation based on the vehicle's installation position.
5. This oil cooler kit also includes 4 corner braces and other accessories which make the installation more secure.
Note:
1. Preparation Before Installation: ①Fill the oil cooler with oil. ②Completely fill until all air is evacuated. ③Attach the oil cooler hoses. ④Fill the oil cooler hoses with appropriate oil.
2. This is a universal oil cooler kit. Just measure the size of the space before buying to ensure that it can be installed, and then you can choose the right size according to your cooling efficiency needs.
3. Professional Installation is Highly Recommended.
4. The item description was measured by hand, it could have 1-2 inches deviation.All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
About MaXpeedingrods
Other items you might also like
A/C TM15 Compressor w/ 8-Groove For ThermoKing Tripac APU PN 102-1018 102-580 Front Black Fender Flare Trim for BMW X3/X4 2011-2018 BM1291108 BM1290108 MaXpeedingrods Coilovers Shocks Lowering Kit For Hyundai Veloster 2012-2017 AC Heater Blend Actuator for Mercury Marauder 2003-2004 604-208 AW7Z19E616A RWD Front Left Right Struts w/ Coil Spring for 2005 - 2015 Toyota Tacoma 2.7L 1X Front CV Axle Shaft Assembly LH Driver Side for Encore Trax 1.4L 1x Front Stabilizer Sway Bar End Link For Honda Pilot 2006 - 2015 Right or Left Front Pair Quick Complete Struts & Coil Springs for Fiat 500 2012-2017 Roof Rack Rail Side Bar Luggage Carrier Aluminum for Honda CRV 2012-2016 165lbs New RE013948 RE013915 Roller Stator Hydraulic Motor for Danfoss White Drive 4PC Mudguards Fender Mud Flaps for GMC Sierra Avalanche 2002-2006 12495823 Front Suspension Lower Control Arms Sway Bar Tierods For 05-10 Chevy Cobalt HHR Established in 2006, maXpeedingrods has been engaged in the research of over world racing products and culture. It has strong capability of independent research & development, industry-leading capacity of quality control and perfect logistics and after-sales service system.
Racing Team
maXpeedingrods always follow the development concept that “Success derives from devotion and happiness comes from sharing” to make contributes to domestic and overseas car tuning enthusiasts and the global racing culture by excellent products and service.
Partnership
MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. We established cooperations with EMtron, Motec, LINK, Cartek, HiM, etc.
Warehouse
MaXpeedingrods owns its warehouses and branch offices in Hongkong, United States, Australia, United Kingdom and Germany.
Other items you might also like
A/C TM15 Compressor w/ 8-Groove For ThermoKing Tripac APU PN 102-1018 102-580 Front Black Fender Flare Trim for BMW X3/X4 2011-2018 BM1291108 BM1290108 MaXpeedingrods Coilovers Shocks Lowering Kit For Hyundai Veloster 2012-2017 AC Heater Blend Actuator for Mercury Marauder 2003-2004 604-208 AW7Z19E616A RWD Front Left Right Struts w/ Coil Spring for 2005 - 2015 Toyota Tacoma 2.7L 1X Front CV Axle Shaft Assembly LH Driver Side for Encore Trax 1.4L 1x Front Stabilizer Sway Bar End Link For Honda Pilot 2006 - 2015 Right or Left Front Pair Quick Complete Struts & Coil Springs for Fiat 500 2012-2017 Roof Rack Rail Side Bar Luggage Carrier Aluminum for Honda CRV 2012-2016 165lbs New RE013948 RE013915 Roller Stator Hydraulic Motor for Danfoss White Drive 4PC Mudguards Fender Mud Flaps for GMC Sierra Avalanche 2002-2006 12495823 Front Suspension Lower Control Arms Sway Bar Tierods For 05-10 Chevy Cobalt HHR CATEGORY
- Products
16 Row Aluminum Trans Engine Oil Cooler Kit Universal AN10 Air Guide Fittings
Images
All modifications must be installed by licensed mechanics and in compliance with your local modification for most cars, may requires additional accessories to meet the needs of the particular application. Please ensure enough space for 16-Row Oil Cooler Kit
Material: Aluminum
Style: English Style
Oil Cooler Inlet/Outlet Size: AN-10
Corner Brace Thickness: 3mm
Fitting Adapters: 2*AN10 Female to AN8 Male; 2*AN10 Female to AN6 Male
Oil capacity:0.35L
Test pressure:0.7-0.8Mpa≈101-116psi
Burst included:
1*16-Row Oil Cooler
2*AN10 Female to AN8 Male fitting adapters
2*AN10 Female to AN6 Male fitting adapters
1*Air Guide Kit
1*Corner Brace Kit
(As Shown in the Picture)
Feature:
1. The oil cooler is made of high quality aluminum, and it is powder-coated and oxidized which can protect the product and be more durable.
2. This oil cooler kit is efficient to cool the oil temperature, and it can keep the oil at a suitable operating temperature to improve engine performance. It can also help to prolong the life of oil and the internal engine components.
3. The oil cooler kit includes a air guide kit, which can make the contact area between the air and the oil cooler greater. Thus it can reduce the oil temperature more effectively.
4. The air guide kit’s top cover and base plate can be interchanged to achieve either a left-facing or right-facing air intake. You can choose the orientation based on the vehicle's installation position.
5. This oil cooler kit also includes 4 corner braces and other accessories which make the installation more secure.
Note:
1. Preparation Before Installation: ①Fill the oil cooler with oil. ②Completely fill until all air is evacuated. ③Attach the oil cooler hoses. ④Fill the oil cooler hoses with appropriate oil.
2. This is a universal oil cooler kit. Just measure the size of the space before buying to ensure that it can be installed, and then you can choose the right size according to your cooling efficiency needs.
3. Professional Installation is Highly Recommended.
4. The item description was measured by hand, it could have 1-2 inches deviation.All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
16 Row Aluminum Trans Engine Oil Cooler Kit Universal AN10 Air Guide Fittings
Other items you might also like
- A/C TM15 Compressor w/ 8-Groove For ThermoKing Tripac APU PN 102-1018 102-580
- Front Black Fender Flare Trim for BMW X3/X4 2011-2018 BM1291108 BM1290108
- MaXpeedingrods Coilovers Shocks Lowering Kit For Hyundai Veloster 2012-2017
- AC Heater Blend Actuator for Mercury Marauder 2003-2004 604-208 AW7Z19E616A
- RWD Front Left Right Struts w/ Coil Spring for 2005 - 2015 Toyota Tacoma 2.7L
- 1X Front CV Axle Shaft Assembly LH Driver Side for Encore Trax 1.4L
- 1x Front Stabilizer Sway Bar End Link For Honda Pilot 2006 - 2015 Right or Left
- Front Pair Quick Complete Struts & Coil Springs for Fiat 500 2012-2017
- Roof Rack Rail Side Bar Luggage Carrier Aluminum for Honda CRV 2012-2016 165lbs
- New RE013948 RE013915 Roller Stator Hydraulic Motor for Danfoss White Drive
- 4PC Mudguards Fender Mud Flaps for GMC Sierra Avalanche 2002-2006 12495823
- Front Suspension Lower Control Arms Sway Bar Tierods For 05-10 Chevy Cobalt HHR
PAYMENT OPTIONS
