When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Fitment:Will compatible with Balboa systems that uses this type of sensor. Also deemed as a good option for Cal Spas ELE09900310 (30337), 59-138-1060 (30337), for Cal Spas ELE09900290 (30298), 5-60-8001 (30337), 5-60-8002 (30298), 5-60-8005 (30294), for Cal Spas ELE09900300 (30294), 34-30337, 34-30337-K and for Cal Spas with S/N 05S-15140 and Model 05-V400M-18, 30327, 34-0202D-K 25-175-0337 Sensor Assembly with Temp and Hi-Limit Sensor Replace for Balboa Compatible with Balboa Systems
Fitment:
Will compatible with Balboa systems that uses this type of sensor. Also deemed as a good option for Cal Spas ELE09900310 (30337), 59-138-1060 (30337), for Cal Spas ELE09900290 (30298), 5-60-8001 (30337), 5-60-8002 (30298), 5-60-8005 (30294), for Cal Spas ELE09900300 (30294), 34-30337, 34-30337-K and for Cal Spas with S/N 05S-15140 and Model 05-V400M-18, 30327, 34-0202D-K
Features:
1) Temp/Hi Limit Sensor serves as a safety device, monitoring and regulating the temperature of our spas. Once overheating spa issues occur, it shuts off the heater. Therefore, if you are experiencing any spa temperature issue, don’t wait to get this Temp/Hi Limit Sensor to resolve it. Very sure this sensor will effectively prevent water from becoming too hot and better improve your spa experience
2) When you have spa trouble codes as follows: Sn, SnA, Sn1, Sn2. Sn3, HL, EO, E2, E3, Prh, Prr, very likely there is something wrong with your sensor. Check it
3) 1) Insert the 3/8” Temperature Sensor into mount and then tighten the nut??2??Slide the 1/4” Hi-Limit Sensor under the sensor cover attached to the heater and tighten the wing-nut to secure. 3??Insert the 4-Pin Connector into the PCB
4) The Temperature sensor—96 inch cable with 3/8 inch bulb;The Hi-Limit sensor—31 inch cable with 1/4 inch bulb
5) OEM part number 30337 and 30337KIT. Compatible with Balboa systems that uses this type of sensor. This sensor assembly also replaces the 30288 sensor assembly
6) The sensor assembly is made of high-quality materials and can adapt to various environments. It can provide fast and accurate measurement results protecting you and the spa from over heating water conditions
Package included:
25-175-0337 Sensor Assembly
Item SpecificsBrand UnbrandedManufacturer Warranty 1 YearManufacturer Part Number 25-175-0337Type 25-175-0337 Sensor AssemblyCompatible for Balboa Compatible with Balboa SystemsCompatible for Balboa Compatible with Balboa Systems
Payment
Returns
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home OtherHot Item Generator Cover-Waterproof Dustproof Sunproof for Honda EU3000is / Predator 3500 USD 17.80 6 Pack Check Valve Kit/ AR2233 Replacement Pressure Washer Pumps Valve Kit USD 12.80 4CH4002R Power Ionizer Pool Replacement Chamber & 460304 Ionizer Transformer kit USD 48.99 Extended Run Fuel Gas Cap Suits Honda Generator EU2000i EU20i Fit 1/4\"NPT Line USD 12.70 For Prier Mansfield 300 400 500 Replacement Wall Hydrant Handle Kit 630-7965 USD 9.89 Delivery
New List Item 6472-960 Cover Valet Chevron Spa Pillow Fit for Sundance Spas 6455-467 6455-482 USD 27.90 MKR-MI-1 Adapter Cable 1852088 for Humminbird HELIX 8-15 Fish Finder, 30 Inches USD 24.90 Idler Arm & Bushing Rebuild Kit for John Deere M143350 M136635 M131119 M111358 USD 59.90 LP93917 Standard Riding Lawn Mower Cover For John Deere 100-X300 Series Tractors USD 59.50 EBV-1020-A Dual Filter Water Closet Electronic Diaphragm Assembly For Sloan G2 USD 39.90 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 25-175-0337 Sensor Assembly with Temp and Hi-Limit Sensor Replace for Balboa Compatible with Balboa Systems
Fitment:
Will compatible with Balboa systems that uses this type of sensor. Also deemed as a good option for Cal Spas ELE09900310 (30337), 59-138-1060 (30337), for Cal Spas ELE09900290 (30298), 5-60-8001 (30337), 5-60-8002 (30298), 5-60-8005 (30294), for Cal Spas ELE09900300 (30294), 34-30337, 34-30337-K and for Cal Spas with S/N 05S-15140 and Model 05-V400M-18, 30327, 34-0202D-K
Features:
1) Temp/Hi Limit Sensor serves as a safety device, monitoring and regulating the temperature of our spas. Once overheating spa issues occur, it shuts off the heater. Therefore, if you are experiencing any spa temperature issue, don’t wait to get this Temp/Hi Limit Sensor to resolve it. Very sure this sensor will effectively prevent water from becoming too hot and better improve your spa experience
2) When you have spa trouble codes as follows: Sn, SnA, Sn1, Sn2. Sn3, HL, EO, E2, E3, Prh, Prr, very likely there is something wrong with your sensor. Check it
3) 1) Insert the 3/8” Temperature Sensor into mount and then tighten the nut??2??Slide the 1/4” Hi-Limit Sensor under the sensor cover attached to the heater and tighten the wing-nut to secure. 3??Insert the 4-Pin Connector into the PCB
4) The Temperature sensor—96 inch cable with 3/8 inch bulb;The Hi-Limit sensor—31 inch cable with 1/4 inch bulb
5) OEM part number 30337 and 30337KIT. Compatible with Balboa systems that uses this type of sensor. This sensor assembly also replaces the 30288 sensor assembly
6) The sensor assembly is made of high-quality materials and can adapt to various environments. It can provide fast and accurate measurement results protecting you and the spa from over heating water conditions
Package included:
25-175-0337 Sensor Assembly
Item SpecificsBrand :UnbrandedManufacturer Warranty :1 YearManufacturer Part Number :25-175-0337Type :25-175-0337 Sensor AssemblyCompatible :for Balboa Compatible with Balboa SystemsCompatible :for Balboa Compatible with Balboa Systems
Payment
Returns
All rights reserved.
