2x 6000k LED Headlight Bulbs HB3/9005 High Beam For Subaru Outback 2010-2019 For Sale

Plug-and-Play LED Upgrade | +400% Brighter Than Halogen | 5-Min Install | 99% No Error Code

Why drivers switch to our HB3 (9005) LED:

►+400% Vision Area— see road signs, lane markings, and pedestrians from 2× farther than stock halogen
• ►No Flicker / No Error Code— built-in smart IC driver resolves 99% of CANbus issues out of the box
• ►1:1 OEM Beam Pattern— same size & focal point as halogen, clean cut-off line, no glare
• ►10,000 LM / Pair (5000LM per bulb)— true usable brightness, not inflated chip rating
• ►>50,000-Hour Lifespan— aerospace-grade aluminum body + high-speed turbo cooling fan
• ►IP67 Waterproof— works in rain, snow, fog, and -40°F winters without flicker
• ►5-Minute Plug-and-Play Install— true 1:1 size, no cutting, no wiring modification

Specifications Bulb Type HB3 (9005) Application Single Beam (High or Low Beam) Color Temperature 6000K Cool White Lumens 5000lm per bulb · 10,000lmper pair Wattage 35 per bulb Voltage DC 9V–32V (fits 12V cars & 24V trucks) Working Temperature -40°F to 302°F (-40°C to 150°C) Waterproof Rating IP67 Heat Control Aerospace Aluminum Body + 35mm Turbo Cooling Fan (12,000 RPM) Beam Angle 360° Adjustable Mounting Bracket Lifespan >50,000 hours Warranty 1-Year Hassle-Free Replacement Vehicle Compatibility & Important Notes

SomeGerman vehicles(VW / BMW / Mercedes / Audi) andDodge, Jeep, Toyota, Nissan, Ford, Chevywith sensitive CANbus systems may need an additionalLoad Resistor / Decoderto stop flickering or clear error messages.
• Some vehicles withDRL (Daytime Running Light)function may need an extra decoder for stable operation.
• Some vehicle models may need a specificretainer / dust-cap adapter(common on Toyota, Honda, VW) — please confirm your dust cap clearance before purchase.

Installation (≈ 5 Minutes)

Turn off the vehicle and open the hood. Locate the headlight dust / seal cover behind the bulb.
1. Twist the stock halogen bulb counter-clockwise and remove it.
2. Insert the LED bulb into the housing. Twist clockwise to lock into place.
3. IMPORTANT:Adjust the LED chips to face3-to-9 o\'clock (side-to-side, NOT up-and-down)for the optimal beam pattern — see the diagram below the steps.
4. Plug the connector back in. Reinstall the dust cover. Test headlights.

Package Included

2xHB3 (9005) Headlight bulbs

Buy With Confidence

📦Ships from California, USA— fast domestic delivery, no customs wait
• 🛡1-Year Hassle-Free Warranty— defective units replaced at no cost
• 💬24-Hour Customer Support— questions answered by humans, not bots
• ⭐Trusted by Thousands of LED Drivers— backed by hundreds of 5-star reviews