45 Inch Side by Side Shotgun Model 21 Prop Non Firing Replica Display Cosplay For Sale

A full-size display replica of the classic side-by-side double-barrelled shotgun — the shape everyone pictures when they hear \"shotgun\".
Two barrels lying side by side, joined by a flat top rib running out to a bead front sight. Behind them a rounded boxlock receiver with shaped sideplate panels, a top tang safety and two triggers in a long rounded guard. A full shoulder stock with a pistol grip and flat butt sits behind, and a slim splinter forend under the barrels.
Wood grain is modelled into the stock and forend — a chevron figure cut into the surface rather than a smooth shape — so it takes a brown wash and comes up looking like walnut with very little work.
Nearly 45 inches overall, a genuine full-size replica within a percent of the real thing, so it hangs, poses and photographs like the gun it represents.
It arrives as 5 separate sections, not assembled — the receiver, the stock and three barrel sections — with a printed assembly sheet. Pieces can be glued for permanency, glue not included.
This is a display prop. It does not fire, has no working action, no barrels bored through and no moving parts, and it cannot be made to fire. A blaze-orange muzzle tip is fitted as an imitation-firearm marking. Sold for display, collection, costume and film or stage use only. You must be 18 or over to buy.
How it\'s made: 3D printed to order in quality black PLA on our in-house production printers at a fine 0.1 mm layer height, so the rib, the grain and the receiver edges stay sharp. It takes primer and acrylics beautifully if you want blued steel and walnut.
Features:

• A full-size side-by-side double-barrelled shotgun, built as a non-firing display prop
• Nearly 45 inches long — a true full-size replica, within a percent of a real 28-inch-barrelled gun
• Twin barrels lying side by side with a flat top rib and a bead front sight
• A clean boxlock receiver with shaped sideplate panels, a top tang safety and two triggers in a long rounded guard
• A full shoulder stock with pistol grip and flat butt, and a slim splinter forend under the barrels
• Wood grain modelled into the stock and forend — a chevron figure cut into the surface, not a smooth shape, so it takes a brown wash beautifully
• Ships in 5 separate sections, not assembled — the receiver, the stock and three barrel sections, which plug together into one continuous line; can be glued for permanency (glue not included)
• Printed at a fine 0.1 mm layer height so the rib, the grain and the receiver edges stay crisp
• Blaze-orange muzzle tip fitted, as an imitation-firearm marking
• Ships unpainted in black PLA — the first photo shows a painted example; no shells, cartridges, figures, paint or accessories are included
• 3D printed to order on our in-house production printers

Please note: The first image shows a painted example. No shells, cartridges, figures, paint or accessories are included. Because each is made to order, please allow the stated handling time before shipment.