When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Specifications: - Quantity: 4Pcs
- Thickness: 1.25 inch (32mm)
- Hub Bore Size: 71.5mm
- Vehicle Bolt Pattern: 5x5" (5x127mm)
- Wheel Bolt Pattern: 5x5" (5x127mm)
- Thread Pitch: M14x1.5
Vehicle Fitment: - For Dodge Durango 2011-2025
- For Jeep Gladiator 2020-2025
- For Jeep Grand Cherokee 2011-2024
- For Jeep Grand Cherokee L 2021-2024
- For Jeep Grand Cherokee WK 2022
- For Jeep Wrangler 2019-2024 (2018 JL Only)
How to choose the correct wheel spacers: 4Pcs 1.25" Hubcentric Wheel Spacers 5x5 For 2011-2024 Jeep Grand Cherokee 14x1.5
Specifications:
- Quantity: 4Pcs
- Thickness: 1.25 inch (32mm)
- Hub Bore Size: 71.5mm
- Vehicle Bolt Pattern: 5x5" (5x127mm)
- Wheel Bolt Pattern: 5x5" (5x127mm)
- Thread Pitch: M14x1.5
Vehicle Fitment:
- For Dodge Durango 2011-2025
- For Jeep Gladiator 2020-2025
- For Jeep Grand Cherokee 2011-2024
- For Jeep Grand Cherokee L 2021-2024
- For Jeep Grand Cherokee WK 2022
- For Jeep Wrangler 2019-2024 (2018 JL Only)
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Item SpecificsBrand :Ignition coilManufacturer Part Number :IG84351901ilType :Wheel SpacersQuantity :4pcsThickness :1.25 inch / 32mmVehicle Bolt Pattern :5x5" or 5x127mmWheel Bolt Pattern :5x5" or 5x127mmHub Bore Size :71.5mmHub Centric :YesThread Pitch :M14x1.5 / 14mmX1.5 / 14x1.5Stud Grade :10.9Color :BlackLug Patterns :5 LugsMaterial :High Quality 6061-T6 Billet AluminumSurface Finish :CNC Machined Polished Aluminum FinishPlacement on Vehicle :Left Right Front RearInterchange Part Number :fits 2011-2023 Jeep Grand Cherokee Dodge DurangoOther Part Number :for jeep wrangler wheel spacersSuperseded Part Number :5x5 Wheel SpacersManufacturer Warranty :1 YearReturn :Free 30 day returnsDelivery Area :the USAPlace of Delivery :Ontario,CaliforniaPlace of Delivery :Ontario,California
Shipping 1.Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.2.USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.3.We usually need a 1-2business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6business days after your payment is received.4.Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.5.Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more.Warranty
1.The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS.
2.VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
3.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 60 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.
4.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 60 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.
5.VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
Return
We stand behind every product we sell.
All of our brand new items come with a 30-Day money-back or exchange guarantee.
response
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive response is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.
Warning
Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.
Best Sales 6 Ignition Coil & Iridium Spark Plug For 05-11 Nissan Frontier Pathfinder Xterra USD 69.99 For Chevrolet Silverado GMC Sierra 1500 4.8L 5.3L 2006-2000 Square Ignition Coil USD 68.99 Front Driver For 2010-2015 Chevrolet Chevy Cruze Power Window Regulator w/ Motor USD 41.29 8 DG508 Ignition Coil Pack For Ford F150 Expedition 00 01 02 2003 2004 4.6/5.4L USD 32.99 4x Ignition Coil For 00-08 Toyota For Corolla Celica Matrix 1.8L 90919-02339 USD 37.99 Newly Listed AC Heater Climate Control Module For 2005-09 Chevrolet Cobalt 2007-09 Pontiac G5 USD 94.88 Alternator For Toyota Highlander 2011-2014 L4 2.7L 11407 27060-0V030 210-0734 USD 126.29 4X For Ford Explorer 13-17 Engine Mount & Transmission & Torque Strut Mount USD 95.15 For 2005-2006 Dodge Magnum AC Condenser & AC Compressor Cooling Assembly USD 221.88 For Chevrolet Silverado 3500 AC Condenser & AC Compressor Cooling Assembly USD 207.88 Terms & ContactShipping PolicyPayment PolicyReturn PolicyFAQAbout Us 4Pcs 1.25" Hubcentric Wheel Spacers 5x5 For 2011-2024 Jeep Grand Cherokee 14x1.5
Specifications:
- Quantity: 4Pcs
- Thickness: 1.25 inch (32mm)
- Hub Bore Size: 71.5mm
- Vehicle Bolt Pattern: 5x5" (5x127mm)
- Wheel Bolt Pattern: 5x5" (5x127mm)
- Thread Pitch: M14x1.5
Vehicle Fitment:
- For Dodge Durango 2011-2025
- For Jeep Gladiator 2020-2025
- For Jeep Grand Cherokee 2011-2024
- For Jeep Grand Cherokee L 2021-2024
- For Jeep Grand Cherokee WK 2022
- For Jeep Wrangler 2019-2024 (2018 JL Only)
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Item SpecificsBrand :Ignition coilManufacturer Part Number :IG84351901ilType :Wheel SpacersQuantity :4pcsThickness :1.25 inch / 32mmVehicle Bolt Pattern :5x5" or 5x127mmWheel Bolt Pattern :5x5" or 5x127mmHub Bore Size :71.5mmHub Centric :YesThread Pitch :M14x1.5 / 14mmX1.5 / 14x1.5Stud Grade :10.9Color :BlackLug Patterns :5 LugsMaterial :High Quality 6061-T6 Billet AluminumSurface Finish :CNC Machined Polished Aluminum FinishPlacement on Vehicle :Left Right Front RearInterchange Part Number :fits 2011-2023 Jeep Grand Cherokee Dodge DurangoOther Part Number :for jeep wrangler wheel spacersSuperseded Part Number :5x5 Wheel SpacersManufacturer Warranty :1 YearReturn :Free 30 day returnsDelivery Area :the USAPlace of Delivery :Ontario,CaliforniaPlace of Delivery :Ontario,California
Shipping 1.Warehouse is located in Los Angeles, California, where local pickup transaction is temporarily not available.2.USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available.3.We usually need a 1-2business day as handling time for packaging and shipping scheduling. Estimated delivery dates should be 4-6business days after your payment is received.4.Your auto parts sometimes might be shipped with two or more separated packages due to weight limitation, please keep patient with no Item Not Received claim or Return request filed until by all of your items are received.5.Seller is required to purchase signature confirmation to be protected if a buyer reports an item not received or opens a payment dispute if the order has a total cost (including shipping costs and any taxes) of $750 or more. Warranty
1.The warranty terms only apply to all the auto parts purchased from VAP-AUTOPARTS.
2.VAP-AUTOPARTS carries no warranty responsibilities for any auto parts removing fees, installation fees, consulting fees, labor costs, towing charges, rental car reimbursements.
3.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues within 60 calendar days from the date when buyers receive their items in the situation when buyers are willing to provide convictive proofs or professional diagnose report if required, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.
4.VAP-AUTOPARTS promises free replacement due to quality defects or item not as described issues after 60 calendar days from the date when buyers receive their items in the situation when buyers promise to prepay 15% of the original item sales price as postage for replacement, otherwise VAP-AUTOPARTS has the right to refuse any replacement requests.
5.VAP-AUTOPARTS carries no warranty responsibilities for any replacement due to car accidents, drag racing, unprofessional replacement, road hazard, disassembly.
Return
We stand behind every product we sell.
All of our brand new items come with a 30-Day money-back or exchange guarantee.
response
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction!As a seller Positive response is very important to us, as well as ourcustomers. We hope that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.
Warning
Please check the compatibility carefully before purchasing. If you are not sure about the model, please contact us in time.
Copyright of VAP-AUTOPARTS. All rights reserved.
![4Pcs 1.25\](img-large/g/NqYAAOSwXl1mj6nL/s-l1600/4Pcs-1-25-Hubcentric-Wheel-Spacers-5x5-For-2011-20.jpg "4Pcs 1.25\")
