When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For attaching a 6.0/6.4L Powerstroke engine to an engine stand using the driver or passenger side engine mounting holes. The engine side adaptor plate has 2 sets of mounting holes to allow the engine to sit centered on your engine stand, whether you’re using the driver or passenger side mounting holes.
The reason for using this adaptor over the traditional way of attaching the engine stand to the transmission adaptor plate bolt holes at the rear of the engine is for ease of assembly of the 6.0 and 6.4 Powerstoke, due to the fact that the cam shaft is inserted from the rear of the engine, while the front cover has all of the accessory components attached to it as well as the low pressure oil pump behind it. If you were to hang the engine on a stand the conventional way, you would have to remove it and turn it around in order to work on the components being blocked by the stand. This bracket solves that problem, while also allowing you to flip the engine over to install the bottom end components with ease
Designed to bolt directly to Harbor Freight Daytona 1500lb Gear Driven Engine Stand #57745 and Harbor Freight Pittsburg 2000lb Engine Stand #59200
May fit other stands using the stands adjustable arms. We only recommend using an engine stand with a capacity of over 1500lbs, as the dressed weight of a 6.0 is just over 1000lbs
CNC Plasma cut from 3/8" steel plate.
Ships painted gloss black. Manufactured in the US with US sourced steel
Includes 4x grade 10.9 bolts and washers to attach the block to the adapter
