When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Lot of six genuine Hardinge 3C collets.Included:
- One 1/4\" round collet
- One 3/16\" round collet
- One 11/64\" round collet
- Two round collets marked .184
- One machined step collet marked .228All six collets are marked Hardinge and 3C.The two collets marked .184 each accepted a nominal .184\" gage pin with a smooth fit during an informal seller check.The step collet is marked .228. Nominal gage pins through approximately .230\" entered smoothly during an informal seller check. The step collet appears to have been machined for a previous application, and its exact intended workpiece or gripping configuration is unknown.The gage-pin checks were basic identification and fit observations only. They do not establish certified bore size, gripping accuracy, runout, concentricity, or condition under clamping force. Gage pins are not included.Condition:
The collets show scratches, spotting, discoloration, residue, and ordinary prior-use evidence. Some faces and bodies have darker marks and isolated oxidation. The slots, threaded ends, tapers, and gripping areas appear intact, with no obvious major cracks or broken sections observed.No lathe fit, drawbar fit, clamping-force, runout, or machining test was performed.Included:
- Six Hardinge 3C collets shownNot included:
- Gage pins
- Collet closer
- Drawbar
- Storage rack
- Machine tooling
- Other accessoriesThe buyer receives the exact six pictured collets.
