700269 AC Heater Blower Motor Fan For 2013-2015 Chevrolet Malibu 2010-2015 Cruze For Sale

Fitment:

• 2010 Buick Allure
• 2010-2016 Buick LaCrosse
• 2011-2017 Buick Regal
• 2010-2016 Cadillac SRX
• 2010-2015 Chevrolet Cruze
• 2016 Chevrolet Cruze Limited
• 2013-2015 Chevrolet Malibu
• 2016 Chevrolet Malibu Limited
• 2010-2011 Saab
• 100% new and high quality auto parts
• The motor armature guarantees powerful airflow and quiet operation, delivering strong air output with minimal noise for enhanced driving comfort during your journeys.
• DIRECT FIT & HIGH EFFICIENCY---A/C Blower Motor Fan Made with silicon steel stamping plates and enameled copper wire for high durability. The impeller and housing are made of corrosion-resistant, high-temperature engineering plastic, ensuring long-term stable use

The Function of a Car's Blower Moteor Fan:

A car's blower motor fan is the powerhouse of the HVAC system, responsible forpushing heated or cooled airthrough your vents into the cabin, ensuring comfort, defrosting windows, and circulating fresh or recycled air, with its speed controlled by dashboard settings to regulate airflow for heating, cooling, or ventilation.

Signs of Blower Motoe Fanfailure:

• Weak or no airflow from air vents
• Blower motor only works at certain speed
• Strange sounds coming from blower motor fan
• Hot/burning smell coming from air vents

How to Replace a Blower motor fanSafely and Efficiently：

Step 1:Disconnect the ground cable from the negative battery terminal. Loosen the retaining bolt using a wrench. Pull the clamp off the terminal.

Step 2:Locate the blower motor. On most vehicles, it will be located inside the engine bay along the firewall on the passenger side of the vehicle. On some vehicles, it may be located inside the passenger compartment, below the dash on the passenger side of the vehicle.

Step 3:Pull the wiring connector or connectors off the blower motor, using your hand. In most cases there will be one plastic connector. If there are more than one, use masking tape and a marker to label them for reassembly.

Step 4:Using a socket, unscrew the screws that secure the blower motor to the heater case or firewall. Pull the blower motor and fan blades from the vehicle as an assembly.

Step 5:Replace new Blower Motor, Installing the Blower Motor.

Step 6:Slide the motor/fan blade assembly into position in the heater case or firewall. Screw in the screws that secure the blower motor to the heater case or firewall.

Step 7:Press the plastic wiring connector onto the back of the blower motor.

Step 8:Reconnect the ground cable to the negative battery terminal. Slide the clamp over the terminal and tighten the retaining bolt with a wrench.

For multiple purchases, please add items to your shopping cart and pay once for entire order.

We only ship to confirmed address, please make sure that the address is correct before you check out.If you need to change your address, please contact customer service

We have two warehouses in US, one is located in CA, and other one is located in GA. We will dispatch packages from the nearest in stock warehouse by recipient's address accordingly.All orders will be shipped out within 1 business day after payment is cleared.

All orders will be shipped out via USPS or UPS or Fedex express with a tracking number,the delivery time is about 3 to 8 working days.

Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available

Some order will have an additional shipping cost due to package size or being outside of standard delivery area.

30 Days Free Return and Money Back

Refunds will be credited within 1 to 5 business days of receiving the return.

If you receive any incorrect items, or damaged or defective items during shipping, we will accept the return and pay for return shipping. Please note that photos of damaged items are provided when possible.

1 Year Warranty---Man-made damage by abuse or wrong operation is not covered by this warranty.

The full refund or replacement will be available for all faulty items

Please contact us before returning your item and we will send you detailed return instructions.

As a professional seller of automotive cooling system parts, Beat-Autocooling aims to provide high-quality automotive parts and a comfortable driving experience for everyone!

As a professional autoparts seller,From Radiator, Cooling Fan, Blower Motor and so on, it covers all car series in the American market, as well as various OEM parts.All products are rigorously tested to ensure driving safety.We also rigorously test materials for strength, durability and longevity to ensure that consumers receive products they can use with confidence.

Any Questions Please Message Us Before Order​

​Customers service center will operate from Monday to Sunday

​If you have any questions during the purchase process feel free to contact us, we are happy to help you!

Fitment:

• 2010 Buick Allure
• 2010-2016 Buick LaCrosse
• 2011-2017 Buick Regal
• 2010-2016 Cadillac SRX
• 2010-2015 Chevrolet Cruze
• 2016 Chevrolet Cruze Limited
• 2013-2015 Chevrolet Malibu
• 2016 Chevrolet Malibu Limited
• 2010-2011 Saab
• 100% new and high quality auto parts
• The motor armature guarantees powerful airflow and quiet operation, delivering strong air output with minimal noise for enhanced driving comfort during your journeys.
• DIRECT FIT & HIGH EFFICIENCY---A/C Blower Motor Fan Made with silicon steel stamping plates and enameled copper wire for high durability. The impeller and housing are made of corrosion-resistant, high-temperature engineering plastic, ensuring long-term stable use

The Function of a Car's Blower Moteor Fan:

A car's blower motor fan is the powerhouse of the HVAC system, responsible forpushing heated or cooled airthrough your vents into the cabin, ensuring comfort, defrosting windows, and circulating fresh or recycled air, with its speed controlled by dashboard settings to regulate airflow for heating, cooling, or ventilation.

Signs of Blower Motoe Fanfailure:

• Weak or no airflow from air vents
• Blower motor only works at certain speed
• Strange sounds coming from blower motor fan
• Hot/burning smell coming from air vents

How to Replace a Blower motor fanSafely and Efficiently：

Step 1:Disconnect the ground cable from the negative battery terminal. Loosen the retaining bolt using a wrench. Pull the clamp off the terminal.

Step 2:Locate the blower motor. On most vehicles, it will be located inside the engine bay along the firewall on the passenger side of the vehicle. On some vehicles, it may be located inside the passenger compartment, below the dash on the passenger side of the vehicle.

Step 3:Pull the wiring connector or connectors off the blower motor, using your hand. In most cases there will be one plastic connector. If there are more than one, use masking tape and a marker to label them for reassembly.

Step 4:Using a socket, unscrew the screws that secure the blower motor to the heater case or firewall. Pull the blower motor and fan blades from the vehicle as an assembly.

Step 5:Replace new Blower Motor, Installing the Blower Motor.

Step 6:Slide the motor/fan blade assembly into position in the heater case or firewall. Screw in the screws that secure the blower motor to the heater case or firewall.

Step 7:Press the plastic wiring connector onto the back of the blower motor.

Step 8:Reconnect the ground cable to the negative battery terminal. Slide the clamp over the terminal and tighten the retaining bolt with a wrench.

For multiple purchases, please add items to your shopping cart and pay once for entire order.

We only ship to confirmed address, please make sure that the address is correct before you check out.If you need to change your address, please contact customer service

We have two warehouses in US, one is located in CA, and other one is located in GA. We will dispatch packages from the nearest in stock warehouse by recipient's address accordingly.All orders will be shipped out within 1 business day after payment is cleared.

All orders will be shipped out via USPS or UPS or Fedex express with a tracking number,the delivery time is about 3 to 8 working days.

Shipping services only cover 48 states and Washington DC in US Continental, while most of the time Alaska, Hawaii, Puerto Rico, American Samoa, U.S. Virgin Islands, Northern Marianas, Guam are not deliverable. USPS PO Box, APO Army Post Office, FPO Fleet Post Office addresses are not available

Some order will have an additional shipping cost due to package size or being outside of standard delivery area.

30 Days Free Return and Money Back

Refunds will be credited within 1 to 5 business days of receiving the return.

If you receive any incorrect items, or damaged or defective items during shipping, we will accept the return and pay for return shipping. Please note that photos of damaged items are provided when possible.

1 Year Warranty---Man-made damage by abuse or wrong operation is not covered by this warranty.

The full refund or replacement will be available for all faulty items

Please contact us before returning your item and we will send you detailed return instructions.

As a professional seller of automotive cooling system parts, Beat-Autocooling aims to provide high-quality automotive parts and a comfortable driving experience for everyone!

As a professional autoparts seller,From Radiator, Cooling Fan, Blower Motor and so on, it covers all car series in the American market, as well as various OEM parts.All products are rigorously tested to ensure driving safety.We also rigorously test materials for strength, durability and longevity to ensure that consumers receive products they can use with confidence.

Any Questions Please Message Us Before Order​

​Customers service center will operate from Monday to Sunday

​If you have any questions during the purchase process feel free to contact us, we are happy to help you!

All rights reserved.