When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
There is no import fee, and shipping is completely free. You will not be charged any additional fees. We ship from USProduct Details
Now with a 2 yr warranty*!!!
Front axle shafts made from 4140 hardened steel. These shafts are giant 7mm in diameter
Comes with:
Axle shafts
Locker
Ring and pinion
You MUST use an aluminum housing to run these axles.
You MUST drill out the axle tube to fit these. The shafts measure approx .275\" diameter so something like a 9/32\" (.281) will work great if you\'re accurate enough or you might have to go bigger if you\'re not accurate.
The locker is tight on the non ring gear side. You will need to lightly tap in the shaft from that side.
Hub sizes are approx:
0 offset stainless approx 9.775\"
225 offset approx 10.375\"
350 offset approx 10.625\"
475 offset approx 10.875\"
600 offset approx 11.125\"
*HUBS NOT INCLUDED*
* Warranty valid for 2 years from original purchase date. Original purchaser only, non-transferrable. **Mechanical steering stops required, failure to use mechanical hard stops to prevent over-steering will void warranty.** Warranty coverage includes locker, inner shafts and 8mm stub shafts. Ring and Pinion, Axial stub shafts, universal joints and pins are not covered under warranty. Warranty does not include shipping cost. You must send parts to me for repair or replacement, and pay for return shipping.
