When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New fog light retrofit harness allows you to add factory fog lights toa 91-92 Camaro that did not originally have fog lights. Harness is very simple to install, and requires no splicing. Installation involves inserting one terminal into the factory bulkhead on the driver side firewall, and hooking up a single ground o-ring terminal to an existing grounding point already in use by yourheadlight harness.You will need to install a fog light relay inside your vehicle (connector is already in the dash harness, above the pedals), a fog light fuse in your fusebox, and a fog light switch in your instrument panel. Harness includes installation instructions.
- Manufactured from original GM components
- Terminals crimped with proper GM tooling
- GM color coded leads
- Meets GM's quality standards at a fraction of the cost
We have been manufacturing repair connectors for select GM vehicles since 2006. We carry an enormous selection of common, and hard to find repair connectors in our store.
Note
This harness consists ofthe underhood portion only. We have taken apartseveral91-92 Camaros and have found all to be wired for fog lights on the driver side of the firewall. We recommend you check that your dash harness is setup for fog lights before ordering. You can check your vehicle by looking for the fog light switch connector behind the left side of the instrument panel, or for the fog light relay connector, located above your pedals.
Fitment
91-92 Camaro
