AeroShell Fluid 3 [1 Gallon] For Sale

Aeroshell Fluid 3
AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to evaporation.

APPLICATIONS

AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as \'an oilcan lubricant\'.

Operating temperature range of AeroShell Fluid 3 is -54°C to +121°C.

For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.

SPECIFICATIONS

• U.S. - Approved MIL-PRF-7870C
• British - Approved DEF STAN 91-47
• French - N/A
• Russian - N/A
• NATO Code - O-142
• Joint Service Designation - OM-12