Axles BULK Sets For 1/64 Scale Custom Restoration Wheels For Sale

ITEM DESCRIPTION:

Axles BULK Sets For 1/64 Scale Custom Restoration Wheels

All lengths of Axle Tubes are 0.8mm Outer Diameter (Only difference between the 6 sizes is the length)

Works with all popular name brands.

Wheels/TiresNOT Included.

EVOLVED RIDES SPECIAL SALE/OFFER:

First Time Buyers Will Receive 1 Free Item, Orders over $25 will receive a 1 Free item, Orders over $50 will receive 3 Free items, Orders over $70 will receive 5 Free items, Orders over $100 will receive 10 Free items.

Return Customers Will Also Randomly Get Freebies In Their Order Regardless Of Final Sell Price.

Sales Tax Is NOT Added To \"Freebie\" Price Deal (MUST Be $25 OR More Excluding Sales Tax)

WILL BE SHIPPED SECURELY IN BOX WITH TRACKING

Orders are processed & shipped same, or next business day of purchase (If we are experiencing a high volume of orders)

Orders are not processed or shipped from Friday, 4pm PST through Sunday, or holidays.

Shipping takes 2-5 Days, Holidays my cause a 1-3 day delay in shipping/handling time.

Evolved Rides offers combined shipping for most of the items listed for sale, if you have an order & want to add to it check to see if the tracking number has been added, if it hasnt been added I can combine your orders and give a partial refund for shipping, add a note to your 2nd order asking for combined shipping.

Please ensure you provide the correct address at checkout, Evolved Rides will not be held responsible if the customer provides the wrong shipping address, & Evolved Rides is not liable for any products lost during shipping.

Evolved Rides aims for customer satisfaction, so if you have any questions/concerns with your order please reach out and Evolved Rides will try to answer any questions/resolve any issues you have with your order.

Evolved Rides also offers 1/64 Scale Wheels, Wheel Spacers, Clear PVC Window Sheets, 3D Printed Accessories, Lowering Bases, Lifted Bases and Much More!

INSTRUCTIONS ON HOW TO USE:

Method With Drill

1) Drill out the base rivets with roughly a 9/64\" drill bit.

2) Take car apart.

3) Pry open or remove base tabs holding the original axles/wheels in.

---for plastic bases, you can easily pry them open with small flathead screwdriver, cut them off with box knife, or snip them off with wire cutters.

---for metal bases, you may be able to cut them off with wire cutters (CAREFULLY, as this will send the tab flying across the room!) if you cannot remove the tab entirely, you will need to use a Dremel disc to grind off the rest of tab, or something similar.

---if you don\'t care about the stock axles/wheels, you can also just bend the wheels to easily cut the axle with wire cutters.

4) Replace axles/wheels.

---if the wheels don\'t fit because axle tube is too long: uninstall axle and trim with dremel disc and try again

---if axle tube is too short (rare): pull out axle pins slightly

---1. Bend axle pins about 10-15 Degrees with pliers

---2. Insert bent Axle pins into the Axle tube to lock wheels on Axle (if it won\'t go in, you\'ve bent it too much, unbend a bit and try again, if it slides out too easily, bend it more)

5) Reassemble car.

---If you didn\'t over drill, the base might just snap back together, otherwise you will need to lay car on it\'s roof and add some super glue onto the posts where the rivets used to be, or something similar like epoxy putty.

Optional: Lower car\'s ride height by sanding down or trimming out the interior that holds the axles.

Method Without Drill:

1) Cut stock axles with wire cutter.

---you may need to bend the wheels to have room to cut them.

2) Use custom axles:

---1. Bend axle pins about 10-15 Degrees with pliers

---2. Insert bent pin into axle tube (if it won\'t go in, you\'ve bent it too much, unbend a bit and try again, if it slides out too easily, bend it more)

---3. Insert 1 axle tube into wheel

---4. Feed axle tube with wheel on it through car\'s base

---5. Insert another wheel into axle tube on the other side of car/axle

---6. Insert bent axle pin into axle tube to lock in the wheels

3) Adjust as needed.

---if axle tube is too long: uninstall axle and trim with Dremel disc and try again

---if axle tube is too short (rare): pull out axle pins slightly

Note: if you don\'t use drill to open car, you can\'t lower the car\'s ride height.