When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description:
A historically trusted, self-curing zinc oxide eugenol cement designed for the temporary cementation of crowns and bridges, as well as restorations in Class III, IV, limited Class I, and deciduous Class II for temporary dental restorations of Class III, IV, and limited Class I cavities.
Suitable for fillings in deciduous teeth of Class Proven Safety:Trusted by dentists forclose to a century.Gentle formula safe for sensitive patients and children.
2. Dual-Action Care:Seals cavities quickly while soothing pulp irritation with natural eugenol.
3. Thermal Protection:Blocks temperature sensitivity by matching natural dentin conductivity.
4. Easy to Use:No tools needed. Self-curing formula for temporary crowns and Parameters
Mixing time: 1.5 minutes.
Solidifying time: 3–10 minutes.
Resistance (24 hours after mixing): ≥25 MPa.
Corrosion in water: ≤1.5%.
Arsenic content: ≤2
- Use a clean, dry glass mixing slab at room temperature (22–24°C) and humidity of 50±10%.
- Ensure the spatula is non-corrosive, free from dust, set cement, and moisture.
2.Powder and Liquid Ratio:
- For cement: 1.5 g powder : 0.5 ml liquid.
- For base: 1.8 g powder : 0.5 ml liquid.
3.Mixing Technique:
- Divide the measured powder into three portions: 1/4, 2/4, and 1/4.
- Incorporate 1/4 of the powder into the liquid and mix.
- Add 2/4 of the powder and mix further.
- Finally, add the remaining 1/4 of the powder.
- Total mixing time should not exceed 90 seconds.
Package Included:
10g*2 Powder
6ml*1 Liquid
