Ekopel Roll On Tub Cast Bathtub Refinishing Kit – Primer + Top Coat Included ... For Sale

Ekopel Roll On Tub Cast Bathtub Refinishing Kit – Primer + Top Coat Included – DIY Bathtub & Tile Reglazing Kit for Porcelain, Fiberglass & Cast Iron – Bright White Gloss, Low Odor, Made In The USA Tub Paint (1 Pack Standard Bathtub)

• TUB CAST ROLL ON – PREP IS THE PROJECT - Tub Cast Roll On delivers best results when surfaces are meticulously prepared. All caulk and silicone residue must be removed, followed by thorough cleaning, sanding/deglossing, and final wipe per instructions. Scan the QR code and follow the full video walkthrough for consistent results.
• PRIMER + TOP COAT SYSTEM – BRIGHT WHITE GLOSS - This kit includes a dedicated primer and glossy top coat designed to restore worn, stained, or discolored tubs. When applied correctly, it cures to a hard, bright white finish on porcelain, fiberglass, and cast iron surfaces.
• COVERAGE MATTERS – STANDARD TUB KIT - This Tub Cast Roll On kit is sized for one standard bathtub. Tub + surround, fiberglass shower stalls, or larger surfaces often require two kits or more. Proper coverage planning helps avoid thin coats, missed areas, and rushed application.
• INTENTIONAL FILL LEVEL – DESIGNED FOR MIXING - This product is intentionally not filled to the top of the container. The extra space allows for proper mixing within the provided vessel, helping ensure a smooth, consistent blend while reducing spills, splashing, and mess during preparation.
• APPLICATION CONDITIONS AFFECT FINISH - Temperature and humidity directly impact leveling and cure. Apply only within recommended conditions and avoid overly warm rooms, which can cause the product to set too quickly. Use thin, even rolling passes and avoid overworking once the coating begins to set.
• PREP & APPLICATION TOOLS NOT INCLUDED - Prep supplies and application tools (such as rollers, trays, sandpaper, cleaners, gloves, tape, and masking materials) are not included. Having the recommended tools on hand before starting helps prevent interruptions and improves finish quality.

Tub Cast Roll On Bathtub Refinishing Kit by Ekopel Tub Cast Roll On is a DIY roll-on bathtub refinishing system designed to help restore worn, stained, or outdated tubs with a bright white gloss finish—without the strong odor of many traditional reglazing products. This kit includes both primer and top coat and is intended for use on porcelain, fiberglass, and cast iron tubs when the surface is properly prepared and application steps are followed carefully. --- Preparation Determines Results Successful projects begin with thorough preparation. All silicone, caulk residue, soap film, oils, and loose coatings must be completely removed before application. Surfaces should be cleaned, sanded/deglossed, and wiped down exactly as outlined in the instructions. Even small contaminants can affect adhesion and finish appearance. --- Coverage Guidance – Plan Before You Start This kit is designed for one standard bathtub. Projects involving tub + surround, fiberglass shower stalls, or heavily textured surfaces often require two kits or more to achieve proper coat thickness and uniform coverage. Planning sufficient product upfront helps avoid thin layers and uneven results. --- Application Expectations Tub Cast Roll On is not a one-step or rush project. · Apply using thin, even rolling passes · Avoid aggressive rolling or repeated passes once the product begins to set · Maintain recommended temperature and humidity · Use adequate lighting to identify runs, bubbles, or missed areas early Following these guidelines significantly improves finish consistency. --- Tools & Supplies Needed (Not Included) Preparation and application tools are not included. Please have the following ready before starting: · Recommended mini rollers and roller trays · Sandpaper or sanding tools for deglossing · Approved cleaners and final wipe materials per instructions · Masking tape, plastic, and protective coverings · Gloves and basic safety gear · Bright lighting for inspection during application Preparing tools in advance helps prevent interruptions and rushed application. --- Cure Time & First Use Cure time depends on room conditions. Follow all recommended wait times between coats and allow the coating to fully cure before exposing it to water, recaulking, or reinstalling fixtures. Premature use is a common cause of adhesion and durability issues. --- Packaging & Quality Check Components are packaged to measured specifications and may not appear completely full prior to mixing. If your kit arrives with missing components, damaged packaging, or broken seals, contact customer support promptly with photos for assistance. --- Helpful Tip Scan the QR code and follow the latest instructional video step by step. Customers consistently report the best results when they allow extra time for prep, use proper tools, and follow the complete process without shortcuts.

Shipping

• We offer FREE shipping on all orders!
• We ship within Three business days of payment, usually sooner.
• We use a selection of shipping services such as UPS, FedEx, USPS etc.
• We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
• Local pickups and combined shipping options are not provided at this time.

Return

• You can return a product for up to 30 days from the date you purchased it.
• Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

Payment

We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!

response

Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.

Contact Us

If you have any queries, please contact us via . We usually respond within 24 hours on weekdays.

Please visit our store to check out other items for sale!

Thank you for shopping at our store.