FORD NAA/JUBILEE/600/800/others TRACTOR GAS TANK NAA9002E NEW REPLACEMENT For Sale

\"\"\"\"\"\" NOTE THE CENTER HOLE AND THE OFFSET SIDE HOLE ARE 3/8NPT\'s(national pipe tap) AND THE 2 HOLES THAT HOLD THE FUEL TAP IN THE CENTER ARE 12 X 24 JUST LIKE THE ORIGINAL ALSO THIS IS THE SMALLEST OF THE 3 DIFFERENT TANKS THAT FORD MADE AND THE ONLY ONE SIZE THAT I KNOW THAT IS BEING BUILT AT THIS TIME\"\"\"\"\"...What you are buying is a NEW REPLACEMENT GAS TANK for a FORD NAA-JUBILEE-600-800 AND CAN ALSO REPLACE THE LARGER TANKS ON THE 601-801-901-2000-4000 4 CYLINDER FARM TRACTOR, I have never replaced a tank on the 500 and 700 series but my FORD PARTS MANUAL shows it is the same tank. Nice quality replacement at a fair price. It will fit right in place of the original tank without any problems because all Fords from 1953 to 64 have the same mounting hole spacing. It is made of STEEL and is painted silver. It has 2 (two) outlets on the bottom one for the 1953-54 models and one in the center for the 55 and up models comes with a plug to plug the hole not needed for your use. Note there is NO gas gauge hole in this tank for a sending in the SHIPS ONLY TO THE CONTENTIAL UNITED STATESFOR THE SET PRICE. PR, AK, HI. AND INTERNATIONAL BUYERS TO PAY SHIPPING COST ON A 35 POUND PLEASE CONTACT ME BEFORE PURCHASINGFOR A SHIPPING QUOTE... NO LONGER PERMITS ME TO GIVE YOU MY PHONE NUMBER FOR QUESTIONS BUT IF YOU EMAIL ME THRU I WILL RESPOND AS SOON AS I GET A CHANCETOMK....NOTE. IfREPLACINGA 10 INCH DEEP TANK on a /801/901/400 4 cylinder 3 different tanks could have been used, flat front or tapered front , 8 inch or 10 inch deep or diesel. YOU will need to put your OWN fittings on for diesel (NLAno longer available) you could have the tapered front 10 inch deep (NLA) or 8 INCH DEEP FLAT FRONT WITCH THIS IS the only tank available new that will work. BUT IT WILL NEED a 1 1/2 TO 2 INCH SPACER UNDER THE TANK we use square tubing others use 1 1/2wood(or a std. 2 x 2) from the store. Some people lengthened the legs on the tank brackets. This is to keep the flange on the gas tank from hitting the flange on the underside of the hood. No adjustments to the tank are needed but the brackets may needed to be modified.....NOTEWE DO NOT JUST SELLPARTS ON LINE I REALLY DO WORK ON TRACTORS IN MY SHOP AND HAVE MY OWN MACHINES TO DO MOST ENGINE MACHINING AND METAL