Filtran 16oz TransJel Red Assembly Lube for Automatic Transmissions, 801206 For Sale

Filtran 16oz TransJel Red Assembly Lube for AutomaticTransmissions, 801206

TransJel is a firm-tack transmission assembly lubricant formulated to support clean, controlled assembly of automatic and manual transmissions. Its dependable consistency helps hold small components and seals in position during installation without running or dripping at room temperature.

Designed for Transmission Rebuilding

Use during transmission assembly to help retain needle bearings, thrust washers, sealing rings, O-rings, hydraulic seals, and gaskets while components are positioned and installed.

Helps Protect Components During Installation

The lubricant helps make O-rings easier to install, reducing the risk of rolling, pinching, or damaging seals and related components during assembly.

Soluble in Transmission Fluid

TransJel is 100% soluble in transmission fluid and liquefies at approximately 143°F (62°C). It will not re-solidify during normal operation and is formulated not to clog transmission filters or leave buildup in filters equipped with felt media.

Firm Tack Strength

Stays firm at room temperature to help prevent dripping and keep assembly components where they belong until installation is complete.

Product Details

• Manufacturer Model Number: 801206
• Type: Transmission Assembly Lubricant
• Container: Tub
• Size: 1 lb
• Base Oil: Mineral
• TAA Compliant: Yes

Key Features

• For automatic and manual transmission rebuilding
• Helps hold bearings, washers, seals, O-rings, and gaskets in place
• Firm, non-drip consistency at room temperature
• Fully dissolves at transmission operating temperature
• Soluble in automatic transmission fluids
• Will not clog transmission filters
• Proven legacy formulation trusted by transmission professionals
• Important: Confirm compatibility with your transmission application and assembly procedures before use.

TRANSMISSION ASSEMBLY LUBRICANT — Firm-tack assembly lube formulated for rebuilding automatic and manual transmissions.

HOLDS COMPONENTS IN PLACE — Helps retain needle bearings, thrust washers, sealing rings, O-rings, hydraulic seals, and gaskets during assembly.

EASIER SEAL INSTALLATION — Helps lubricate O-rings and seals during installation to reduce the risk of rolling, pinching, or component damage.

DISSOLVES AT OPERATING TEMPERATURE — Liquefies in transmission fluid at approximately 143°F (62°C), remains soluble, and will not re-solidify during normal operation.

FILTER-SAFE FORMULA — Designed not to clog transmission filters or leave buildup in filters equipped with felt media; firm at room temperature to resist running and dripping.

We welcome offers and all reasonable offers will be considered. When making an offer please consider product cost, shipping cost, and your location. This is especially important when making offers on smaller value items. We offer free shipping on most of our parts; therefore, if your offer does not even cover the delivery cost, it doesn’t make sense for us to accept it.

A good rule of thumb is to offer no more than 15-20% less than the listing price.

IMPORTANT PLEASE READ ALL BEFORE PURCHASING

As a buyer, it is your responsibility to verify that this part is compatible with your application.

We WILL NOT pay for return shipping for parts ordered in error. If you order the incorrect part and start a return selecting the reason to be anything otherwise, you will be reported to in order to recoup shipping fees.  

All Ford branded parts are genuine Ford OEM part. We purchase directly from Ford Components in bulk, which means the parts may not come in traditional dealer-branded packaging. Additionally, part numbers are removed (dremeled off) per our pricing agreement with Ford Components to ensure any returns are processed through us and not a dealership. Rest assured, the quality and fitment are identical to what you’d receive from a order will be shipped within 1 business days (MON-FRI excluding holidays) of receiving payment and you should expect to receive it five to seven days via US Postal Service or UPS Ground Standard Shipping unless another shipping method is chosen.  In addition to UPS Ground, we offer expedited services as well as local pick-up. Please contact us if a quote is needed and we will be happy to work with you.

Please Note: All packages valued at over $500 WILL require a signature upon delivery. 

If your package arrives damaged, please do not open it and contact us immediately.  If you install damaged parts they will not be returnable.

If your package is returned by the carrier due to address errors, you will be responsible for the shipping Customers:

Please make sure you monitor your package. Any import duty/taxes must be paid by the buyer. If you do not pay in a timely fashion your package will be returned. You will not receive a refund for the returned items until they’re delivered. Shipping fees will not be reimbursed. style=\"text-align:justify\">CORE RETURN DIRECTIONS & GUIDELINES

Cores must returned within 30 days of the original purchase or any claim to warranty will be null/void.

Whatever It Takes will not be liable for fees, such as taxes, duties, customs associated with international shipments, or lost shipments.

Please note that this core policy only applies to purchases made through an e-commerce platform.

Whatever It Takes Transmission Parts warrants this product to be free from defects in materials and workmanship at the time of sale when used under normal, intended operating conditions.

Not all products sold by Whatever It Takes Transmission Parts include a warranty. Any warranty coverage applies only to products that are explicitly identified as having a warranty at the time of purchase. The information below outlines the terms and limitations only if a warranty is provided with the specific product.

What’s Covered

• Manufacturing defects in materials or workmanship
• Failures under normal, intended use

If a defect is confirmed, liability is limited to replacement of the part or refund of the purchase price, at our Not Covered

• Normal wear and tear
• Improper installation or incorrect application
• Misuse, abuse, neglect, accidents, or modifications
• Damage from overheating, contamination, improper lubrication, or lack of maintenance
• Labor costs (installation, removal, diagnosis)
• Consequential or incidental damages (downtime, towing, loss of Notice
  Professional installation is required. Failure to follow manufacturer and industry-standard installation procedures will void this warranty is limited to the product only and does not cover related components or vehicle damage. Maximum liability shall not exceed the original purchase price.

  30-day return policy for unused, uninstalled items. Any product you return must be in the same condition you received it and in the original packaging.

  
  

  If you’re having an issue with a used or remanufactured item and it’s been installed, we require the buyer to contact us immediately so we can provide trouble shooting information. Worst case scenario if that fails, exchange only.

  
  

  Certain item such as fluids, used items, tools, and one time use items are not eligible for return.  As a buyer, it is your responsibility to verify that this product is compatible with your you ordered the wrong item for your application YOU are responsible for the return shipping. 

  
  

  20% Restocking Fee May Apply

  
  

  A NAME YOU CAN TRUST

  As an industry veteran in the transmission parts supply business, you can buy with confidence.  Our goal is to provide high quality parts, an experienced sales force, and the highest levels of product availability possible.

  Filtran 16oz TransJel Red Assembly Lube for AutomaticTransmissions, 801206

  TransJel is a firm-tack transmission assembly lubricant formulated to support clean, controlled assembly of automatic and manual transmissions. Its dependable consistency helps hold small components and seals in position during installation without running or dripping at room temperature.

   

  Designed for Transmission Rebuilding

  Use during transmission assembly to help retain needle bearings, thrust washers, sealing rings, O-rings, hydraulic seals, and gaskets while components are positioned and installed.

   

  Helps Protect Components During Installation

  The lubricant helps make O-rings easier to install, reducing the risk of rolling, pinching, or damaging seals and related components during assembly.

   

  Soluble in Transmission Fluid

  TransJel is 100% soluble in transmission fluid and liquefies at approximately 143°F (62°C). It will not re-solidify during normal operation and is formulated not to clog transmission filters or leave buildup in filters equipped with felt media.

   

  Firm Tack Strength

  Stays firm at room temperature to help prevent dripping and keep assembly components where they belong until installation is complete.

   

  Product Details

  • Manufacturer Model Number: 801206
  • Type: Transmission Assembly Lubricant
  • Container: Tub
  • Size: 1 lb
  • Base Oil: Mineral
  • TAA Compliant: Yes

   

  Key Features

  • For automatic and manual transmission rebuilding
  • Helps hold bearings, washers, seals, O-rings, and gaskets in place
  • Firm, non-drip consistency at room temperature
  • Fully dissolves at transmission operating temperature
  • Soluble in automatic transmission fluids
  • Will not clog transmission filters
  • Proven legacy formulation trusted by transmission professionals
  • Important: Confirm compatibility with your transmission application and assembly procedures before use.

   

  TRANSMISSION ASSEMBLY LUBRICANT — Firm-tack assembly lube formulated for rebuilding automatic and manual transmissions.

   

  HOLDS COMPONENTS IN PLACE — Helps retain needle bearings, thrust washers, sealing rings, O-rings, hydraulic seals, and gaskets during assembly.

   

  EASIER SEAL INSTALLATION — Helps lubricate O-rings and seals during installation to reduce the risk of rolling, pinching, or component damage.

   

  DISSOLVES AT OPERATING TEMPERATURE — Liquefies in transmission fluid at approximately 143°F (62°C), remains soluble, and will not re-solidify during normal operation.

   

   

  FILTER-SAFE FORMULA — Designed not to clog transmission filters or leave buildup in filters equipped with felt media; firm at room temperature to resist running and dripping.

  TransJel is a firm-tack transmission assembly lubricant formulated to support clean, controlled assembly of automatic and manual transmissions. Its dependable consistency helps hold small components and seals in position during installation without running or dripping at room temperature.

   

  Designed for Transmission Rebuilding

  Use during transmission assembly to help retain needle bearings, thrust washers, sealing rings, O-rings, hydraulic seals, and gaskets while components are positioned and installed.

   

  Helps Protect Components During Installation

  The lubricant helps make O-rings easier to install, reducing the risk of rolling, pinching, or damaging seals and related components during assembly.

   

  Soluble in Transmission Fluid

  TransJel is 100% soluble in transmission fluid and liquefies at approximately 143°F (62°C). It will not re-solidify during normal operation and is formulated not to clog transmission filters or leave buildup in filters equipped with felt media.

   

  Firm Tack Strength

  Stays firm at room temperature to help prevent dripping and keep assembly components where they belong until installation is complete.

   

  Product Details

  • Manufacturer Model Number: 801206
  • Type: Transmission Assembly Lubricant
  • Container: Tub
  • Size: 1 lb
  • Base Oil: Mineral
  • TAA Compliant: Yes

   

  Key Features

  • For automatic and manual transmission rebuilding
  • Helps hold bearings, washers, seals, O-rings, and gaskets in place
  • Firm, non-drip consistency at room temperature
  • Fully dissolves at transmission operating temperature
  • Soluble in automatic transmission fluids
  • Will not clog transmission filters
  • Proven legacy formulation trusted by transmission professionals
  • Important: Confirm compatibility with your transmission application and assembly procedures before use.

   

  TRANSMISSION ASSEMBLY LUBRICANT — Firm-tack assembly lube formulated for rebuilding automatic and manual transmissions.

   

  HOLDS COMPONENTS IN PLACE — Helps retain needle bearings, thrust washers, sealing rings, O-rings, hydraulic seals, and gaskets during assembly.

   

  EASIER SEAL INSTALLATION — Helps lubricate O-rings and seals during installation to reduce the risk of rolling, pinching, or component damage.

   

  DISSOLVES AT OPERATING TEMPERATURE — Liquefies in transmission fluid at approximately 143°F (62°C), remains soluble, and will not re-solidify during normal operation.

   

   

  FILTER-SAFE FORMULA — Designed not to clog transmission filters or leave buildup in filters equipped with felt media; firm at room temperature to resist running and dripping.