When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
SpecificationsMaterial: Hardened SteelModel: K11-160Jaw: 3 JawHigh Precision: ≤0.002" / 0.05 mmColor: SilverLathe Chuck: Findmall K11-160 Lathe Chuck 6",Metal Lathe Chuck Self-centering 3 Jaw Chuck
Specifications
Material: Hardened Steel
Model: K11-160
Jaw: 3 Jaw
High Precision: ≤0.002" / 0.05 mm
Color: Silver
Lathe Chuck:
Diameter of the chuck: φ160 mm
Center hole: φ45 mm
Distribution of screw holes: φ142 mm (3×M8)
Thickness of the chuck: 65 mm
Outer jaw clamping range: 55–145 mm
Inner jaw clamping range: 3–55 mm
Reverse jaw clamping range: 50–160 mm
Maximum rotational speed: 2500 r/min
1. Clean the end face of the spindle and the installation surface of the chuck, remove iron filings, oil stains and burrs.
2. Align the stop of the spindle, place it steadily and ensure concentricity.
3. Tighten the bolts diagonally and alternately in several stages evenly, and prohibit unilateral tightening.
4. Rotate at low speed for 1-2 minutes to check for runout, abnormal noise and looseness.
5. Regularly lubricate the gear disk and clean the claw grooves to avoid overloading Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC 58-62. It has high strength and toughness, compression resistance and durability, and long service life.
High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation.
2 Sets of Jaws: This chuck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.12" / 3 mm - 6.3" / 160 mm, which is suitable for clamping a variety of industrial parts.
Fast Clamping Speed: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient.
High Adaptability: This scroll chuck is highly adaptable and can be used with the same series of jaws, which is suitable for a variety of parts such as hanging shafts, disks, equilateral triangles, etc.
Package Including??
1 piece K11-160 Lathe Chuck 6", Metal Lathe Chuck Self-Centering 3 Jaw
Item SpecificsCountry of Origin United StatesBrand findmallMPN 258414Type Lathe ChuckModel K11-160Number Of Jaws 3Size 6 InchBolt Circle Diameter 5.59" / 142 mmChuck Body Thicknes 2.56" / 65 mmMaterial Hardened SteelColor SilverItem Package Quantity 1Item Weight 18.44 poundsMounting Thread 3-M8
Payment
1.We will arrange for shipment as soon as possible to ensure your item arrives on time.
Shipping
1.Usually your Items will be shipped within 1-3 business day after your payment is cleared.
International orders may take 10 to 30 business days to arrive.
2.We have CA, NJ warehouses and ship items may vary according to the stock.
3.No shipping on Weekends or US Public Holidays.
Returns
We now offer for US buyers 30 days money back guarantee . If US buyers does not like the item or feels not satisfied with the product, we will cover the return shipping fee & US buyer can return the item and get refund for item price only.
Contact Us
If there are any defects or issues with the product, we will resolve them for you as soon as possible. Thank you for your understanding and support.
response
We offer high quality products, competitive prices and prompt delivery .Please add us to your list of favorite sellers. Our company has experience in serving the global aftermarket. Thank you for your business. Best wishes!
CNCHand ToolsIndustrial ConsumablesElectric Motor & PumpHeavy Machinery Parts Hot Item Replacement AVR SX460 Automatic Voltage Volt Regulator For Stamford Generator USD 15.86 Findmall 50 Feet Mini Split Installation Kit - 1/4\" & 3/8\" Copper Line Set USD 119.79 Findmall AVR SE350 Automatic Voltage Regulator For Generator Electric Controller USD 18.01 Findmall 6 Ton Hydraulic Crimper Crimping Tool Wire Battery Cable Lug Terminal USD 31.17 10 Pair 1/8\" Steel Parallel Set 0.0002\" Hardened 1/8\" x 6\" Suit Milling Thin New USD 30.26 New List Item Findmall 1/2\" Ag Hydraulic Quick Connect Couplers Couplings Ball Style 2 Set NEW USD 25.16 MT4 Bull Nose Live Center 6.3\"(160mm) Triple Bearing Morse Taper #4 For Lathe USD 115.00 Findmall (BSPP) 2Spool Hydraulic Directional Control Valve 11GPM 3600 PSI USD 40.39 345-6230 3456230 CA3456230 Cab Door Glass For Caterpillar D Series 259D 257D USD 177.55 Findmall DSE703 For Deep Sea ATS Controller Control Module Transfer Switch Auto USD 49.96 Store CategoryStore Home CNC◈Edge finder◈Drill Bits◈Spring Collet◈Boring Bar◈Mandrel◈Collet Chuck◈Pull Stud◈Quick Change Tool Post◈Drill Chuck◈Drill Chuck Arbors◈live center◈vise◈Milling Hand Tools◈Rivet Gun◈Wrenches◈Hydraulic Bits◈Outside micrometer◈Balance Level Metalworking Supplies◈Sanding Disc◈Metal Cut Off Wheels◈Flap Discs◈Hose Clamp◈Welding Wire◈Cable◈Piston Driver◈Other Generator Accessories◈Automatic Voltage Regulator◈Generator Carburetor◈Other Industrial Control Module◈Control Valves◈Roller Chain◈Other Decorate◈Conduit Corrugated◈Interior door fittings◈Decoration materials◈Paint Sprayers Construction Machinery▷Excavator Parts♢Excavator Carburetor♢Engines & Engine Parts♢Seat♢Other Excavator Parts▷Truck Parts♢Tow Chain♢Other Agricultural Equipment▷Tractor Parts♢Other Tractor Parts◈Farm Machinery Accessories Findmall Peripheral Products Brand New Products Other Findmall K11-160 Lathe Chuck 6",Metal Lathe Chuck Self-centering 3 Jaw Chuck
Specifications
Material: Hardened Steel
Model: K11-160
Jaw: 3 Jaw
High Precision: ≤0.002" / 0.05 mm
Color: Silver
Lathe Chuck:
Diameter of the chuck: φ160 mm
Center hole: φ45 mm
Distribution of screw holes: φ142 mm (3×M8)
Thickness of the chuck: 65 mm
Outer jaw clamping range: 55–145 mm
Inner jaw clamping range: 3–55 mm
Reverse jaw clamping range: 50–160 mm
Maximum rotational speed: 2500 r/min
1. Clean the end face of the spindle and the installation surface of the chuck, remove iron filings, oil stains and burrs.
2. Align the stop of the spindle, place it steadily and ensure concentricity.
3. Tighten the bolts diagonally and alternately in several stages evenly, and prohibit unilateral tightening.
4. Rotate at low speed for 1-2 minutes to check for runout, abnormal noise and looseness.
5. Regularly lubricate the gear disk and clean the claw grooves to avoid overloading Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC 58-62. It has high strength and toughness, compression resistance and durability, and long service life.
High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation.
2 Sets of Jaws: This chuck includes two sets of internal and external jaws. The clamping range of this chuck is between 0.12" / 3 mm - 6.3" / 160 mm, which is suitable for clamping a variety of industrial parts.
Fast Clamping Speed: The lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient.
High Adaptability: This scroll chuck is highly adaptable and can be used with the same series of jaws, which is suitable for a variety of parts such as hanging shafts, disks, equilateral triangles, etc.
Package Including??
1 piece K11-160 Lathe Chuck 6", Metal Lathe Chuck Self-Centering 3 Jaw
Item SpecificsCountry of Origin :United StatesBrand :findmallMPN :258414Type :Lathe ChuckModel :K11-160Number Of Jaws :3Size :6 InchBolt Circle Diameter :5.59" / 142 mmChuck Body Thicknes :2.56" / 65 mmMaterial :Hardened SteelColor :SilverItem Package Quantity :1Item Weight :18.44 poundsMounting Thread :3-M8
PaymentShippingReturnsContact Usresponse
1.We will arrange for shipment as soon as possible to ensure your item arrives on time.
1.Usually your Items will be shipped within 1-3 business day after your payment is cleared.
International orders may take 10 to 30 business days to arrive.
2.We have CA, NJ warehouses and ship items may vary according to the stock.
3.No shipping on Weekends or US Public Holidays.
We now offer for US buyers 30 days money back guarantee . If US buyers does not like the item or feels not satisfied with the product, we will cover the return shipping fee & US buyer can return the item and get refund for item price only.
If there are any defects or issues with the product, we will resolve them for you as soon as possible. Thank you for your understanding and support.
We offer high quality products, competitive prices and prompt delivery .Please add us to your list of favorite sellers. Our company has experience in serving the global aftermarket. Thank you for your business. Best wishes!
All rights reserved.
On Sep 8, 2026 at 04:28:40 PDT, seller added the following information:
![Findmall K11-160 Lathe Chuck 6\](img-large/g/nMUAAeSwKDVqF6zP/s-l1600/Findmall-K11-160-Lathe-Chuck-6-Metal-Lathe-Chuck-S.jpg "Findmall K11-160 Lathe Chuck 6\")
