For 2005-11 Mercedes-Benz SLK-Class SLK300 Left&Right Side Headlight Lens w/Glue For Sale

CS For Mercedes-Benz SLK R171 2005-2011 Headlight Lens Cover+Glue Left&Right Side ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯ ❮ ❯

▶Fast & Free Shipping From KY or CA.

▶Warranty: 1Year

▶100% New & 100% Tested & Fast Free Shipping

▶simply direct replacement

Features:

100% brand new and high quality.

Professional installation is highly recommended

(Professional Customer Service Technical Guidance).

Fitment:

For 2005-2011 Mercedes-Benz R171 SLK

Package included:

PairHeadlight Lens Shell + Glue.

Please make sure our product fits your model before placing an order and don\'t hesitate to contact us if you have any issue.

Installation and operation instructions for lampshade

Tools: 1 larger and deeper basin, 1 flat screwdriver, 1 clean absorbent cloth, 1 pair of gloves (non shedding), 1 pair of scissors

Operation method:

1. Remove the headlights from the car (this requires removing the bumper. When removing the bumper, use a cardboard box to cushion it on the ground to avoid rubbing the paint on the bumper);
2. After removing the headlights, put the basin in boiling water and press the headlight cover completely into the water for 5 minutes, and the glue will soften;
3. Use a absorbent cloth to quickly and as much as possible dry the water droplets on the surface of the lampshade and rear shell, then use a Phillips screwdriver to insert the adhesive joint between the lampshade and rear shell (the adhesive is now soft), horizontally open a 10 centimeter long opening, and then use a stop to forcefully break it off (to prevent deformation of the rear shell);
4. Clean up the glue in the rear shell glue sink as much as possible, wear gloves, and then remove the decorative frame on the lampshade and install it on the new lampshade;
5. Operate the snake glue we provide as follows:

(1) Spread the snake glue and protective paper evenly in the glue groove of the headlight back shell, and press it firmly by hand.

(2) Remove the protective paper and heat the snake glue with a hair dryer or hot air gun. Please do not heat the local area for a long time, and ensure that the entire snake glue is evenly heated. Then close the new lampshade according to the original lamp position and press it firmly.

1. After installation, it can be loaded onto the vehicle for use.

Please note:

If you are unsure of the item, please contact us before buying to avoid unnecessary return,thanks!

Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time, before opening return or case.