When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This sale is fora 3/4 gallon can ofSMR-9705 High Gloss Jet Black Paintanda quart of SMR-9705A medium activator; which yieldsone gallon sprayable.
The SMR-9705 isless than2.8 lbs/gallon voc.
SMR-9705 is a 2 component acrylic urethane coating. It mixes 3:1 with a 5% optional
reduction with Urethane Grade Reducer.
This coating is a high qualitysingle stage urethane topcoat.
FEATURES:
.True 2K Urethane Durability
.Uniform Jet Black Color
.Excellent Exterior Stability from UV Light
.Fast Dry
.Easy 3:1 Mix Ratio
.Chemical Resistant Finish
.Great Gloss and DOI
MIX RATIO: 3:1
GUN SETUP
Fluid Tip psi
HVLP Spray Gun 1.3mm, 8-10 psi
APPLICATION
Apply2 medium wetcoats. Allow 5-10 minutes flash time
between coats.
Dry Times:
Dust Free: 10 minutes depending on temperature and activator selection
Tack Free: 10 minutes
Force Dry: 20 minutes @ 130°F (49°C)
Delivery: Air Dry: 6-8 hours
Bake: After cool down
Health and Safety:
See Material Safety Data Sheet and labels for additional safety information and handling instructions.
*
The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
the mixture will have the hazards of all its parts.
* Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
* Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
* Provide adequate ventilation for health and fire hazard control.
*
Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
requirements.
* Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
* Always observe all applicable precautions and follow good safety and hygiene Nov-19-13 at 08:47:28 PST, seller added the following information:
