When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Introducing the the StretchYJ body for the Summit Chassis
Hi-res 100% infill PLA printed body
This body is designed to run a 155mm Wheel base while keeping a LCG.
To achieve the proper wheel base you will need
-C10/Wrangler/Basecamp Rear links to run in the front.
-Deadbolt Rears for the rear
Rampcrab links are recommended (Amazon)
You will need to add caster to clear servo horn. To do this you will need my custom printed upper links that are included! (For stronger upper links I offer carbon as well in my store)
Any of the Meus Axles are recommended
*If you are running LGRP axles you will need to run the lower links on the inside of the axle links mounts. And you will need to run their adjustable upper links mounts servo mount.**
For driveshafts you will need the matching driveshaft to the links you use or Meus cut to fit shafts.
What’s in the packaging-
StretchYJ body
Cage
Rear cargo piece
Hood
Front + rear body mount
Door hinges
Hardware
I hand drill all holes to insure hardware fitment. You must not put too much force into installing hardware or it may lead to part breakage.
I would like to give credit to the original file creator to Maury-bs on Cults. I have heavily modified this body to work as an incredible comp style rig.
Please message me for questions regarding your build.
Fast shipping!!
