Manual Tire Bead Breaker Tool Tire Repair for 38"-42" Car Bus Truck ATV For Sale

Features & Details:

• Upgraded Bead Breaker: Featuring an upgraded rubber pad on the clamp, the tire bead breaker will not dent/scratch rims or do harm to the wheel. For minimizing the friction, we recommend to use leather protection during changing tires
• Sturdy & Lightweight: Made of heavy-duty steel and coat with protective layer, the manual tire changer is strong enough to remove tires. It measures 9.8*5.9*4.7" and weights 11.5 lbs, can be stored in your workplace and garage, or take outdoor according to you needs
• Wide Application: No worries about fit! The tire changing tool easily handles tires from 38" to 42" in diameter, working on a ton of vehicles—car, lawn mower, golf cart, truck, bus, tractor, ATV and UTV etc.
• Steps of Use: Position tire removal tool on rim with teeth/breaker foot between rim and tire bead. Tighten rim clamp jaw with hand wrench until snug. Adjust drive screw to press telescopic foot, then separate tire by repeating in 2-3 positions
• Wrench Required: Manual tire changer needs to be used with a wrench(not included), such as adjustable wrench, open end wrench, or air wrench. DO NOT use the impact wrench so as not to damage the bead breaker.

Clamp both sides of the wheel with the tire bead breaker. Sometimes it will need a tap to get into place.

Needs to be used with a wrench(not included) but DO NOT use the impact wrench

The wrench requirements and operations are the same as in step 2. After tightening the lip of the rim, you can break the bead easily

Once the bead is broken, just loosen the set screw to release the tire bead breaker from the rim

On Jul 1, 2026 at 00:35:09 PDT, seller added the following information: