When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is the Mechwarrior King Crab, printed in FDM, using PETG Filament.
This Mech is articulated, and has joints in the ankles, knees, waist, elbows, and shoulders. The figure stands about 7\" tall, or roughly 1:70 scale.
It is held together with pins, ball joints, and requires no glue to stay together. It can be taken apart and re-assembled for painting, and can be re-posed as desired. I\'ve included extras of the pins and connectors, in case one gets loose, lost or broken. Lastly, there\'s a small installation tool to remove/install the joints more easily as well.
Since this is an FDM printed part, expect a few blemishes on the back side of the print. This is a normal part of printing larger parts such as these. I\'ve oriented things such so that most all the blemishes are on the back side, and removed the supports. It should be mostly ready to file, prime and paint.
Lastly, feel free to contact me if there\'s another mech, or size you\'re interested in, or check out my \"Made to Order\" Lists. I have Over 100 different mechs available that can be printed upon request, and different sizes are available there as well.
![Mech Figurine - King Crab; 7\](img-large/g/KiMAAeSwET9nsjnh/s-l1600/Mech-Figurine-King-Crab-7-Size-Articulated.jpg "Mech Figurine - King Crab; 7\")
