NEW Custom 4S 5\" Analog FPV Drone ELRS USA Built + 8 Props For Sale

🇺🇸 NEW CUSTOM 5-INCH ANALOG FPV DRONE — BUILT IN THE USAALL YOU NEED IS:

✅ Compatible FPV Goggles

✅ Compatible Radio Controller

That\'s it.

The drone is already built, configured, tested, and ready for you to set up with your own goggles and controller.

No need to spend weeks ordering separate motors, ESCs, flight controllers, VTXs, receivers, frames, hardware, and props.

Need arm/motor bumpers or other 3D-printed parts with this drone? Message me before checkout.

I may be able to include compatible parts such as motor/arm protectors, antenna mounts, camera mounts, GPS mounts, receiver mounts, or other small FPV accessories in the same package.

If they ship together with the drone, you do not need to pay a separate shipping fee for the added 3D-printed parts.

Send me a message with what you need before purchasing, and I’ll let you know what is available and compatible with the build.

BUILT BY SOMEONE WHO ACTUALLY CRASHES FPV DRONES 😎

I\'ve been flying FPV for more than 5 years.

And not just slow cruising.

I\'ve spent years flying hard freestyle, pushing frames hard, crashing into concrete, trees, dirt, walls, gates, and plenty of things that looked much softer from the goggles.

After buying and testing many different FPV frames over the years, I noticed something:

A lot of frames are easy to break.

Break an arm.

Break a plate.

Damage the camera cage.

Buy another replacement part.

Crash again.

Repeat.

And lately, FPV parts have become much more expensive.

That gets old fast.

SO I BUILT THIS DIFFERENTLY

After years of hard flying and breaking frames, I developed my own durability-focused build approach for these quads.

The goal is simple:

Make the drone survive more abuse so you spend more time flying and less time rebuilding.

I use a builder-developed reinforcement method based on what I\'ve learned from years of hard freestyle crashes.

I\'m not going to publish every detail of how I reinforce the build...

That\'s part of what makes these quads different. 😉

But the idea is straightforward:

Build the weak points stronger before they become weak points.WHY?

Because I don\'t want to sell you a drone hoping you\'ll break it and come back for another one.

I\'d rather build you something that lasts.

A good FPV drone should make you want to buy another quad because you\'re having fun...

Not because your current one broke after a few crashes.

📦 WHAT\'S INCLUDED

✅ 1× Brand-New Custom 5-Inch Analog FPV Drone

✅ Analog FPV system installed

✅ Receiver installed

✅ Fully assembled

✅ Configured and tested before shipping

✅ 8 propellers included

✅ Additional accessories shown in the photos

✅ Seller warranty

✅ Built / assembled in the USA 🇺🇸

✅ Ships from a U.S. seller

💰 FPV HAS GOTTEN EXPENSIVE

Anyone who\'s been flying FPV for a while knows it.

Frames cost more.

Motors cost more.

Flight controllers cost more.

ESCs cost more.

VTX systems cost more.

And somehow we still destroy props like they\'re free.

I\'ve watched FPV prices climb over the years, so one of my goals with these builds is to keep the cost as low as reasonably possible.

Good build.Durable setup.Fair price.

I want more people flying FPV — not staring at a shopping cart wondering how five small electronic parts became $400.

🔨 HAND BUILT — NOT ASSEMBLY LINE BUILT

Every quad is put together by hand.

Every screw matters.

Every solder joint matters.

Every wire matters.

Every motor matters.

Every Betaflight setting matters.

Before shipping, the quad is checked and tested.

I\'m not just putting parts together and hoping for the best.

I\'m building it the same way I\'d want one of my own freestyle quads built.

⚠️ POSSIBLE SIDE EFFECTS

Purchasing this drone may result in:

✓ Looking at every abandoned building and thinking:

“That looks flyable.”

✓ Saying:

“I\'m only flying one pack today.”

Nobody believes you.

✓ Finding a tiny gap between two concrete pillars and thinking:

“Yeah, I\'ll fit.”

Sometimes you will.

Sometimes you\'ll learn why I care so much about frame durability.

✓ Becoming suspiciously calm after hearing carbon fiber hit concrete.

Experienced FPV pilots call this acceptance.

✓ Buying more batteries.

Then more props.

Then another charger.

Then another drone.

Because apparently that\'s how this hobby works.

💥 HARD FREESTYLE EXPERIENCE MATTERS

I\'ve crashed enough FPV drones over the last 5+ years to know where builds usually fail.

That\'s exactly why durability matters to me.

I don\'t build these for someone who plans to hover six feet above grass forever.

They\'re built with real FPV use in mind.

Freestyle.

Power landings.

And occasionally...

Concrete reminding you who\'s boss.🎁 8 PROPELLERS INCLUDED

Why include eight props?

Because anyone who promises you\'ll never break a prop has clearly never flown FPV.

You\'ll need extras eventually.

So I\'m including them from the start.

🛡️ SELLER WARRANTY

This quad comes with a seller warranty covering build-related defects.

If there\'s an issue caused by the build, contact me directly.

Obviously, the warranty cannot cover normal FPV crash attempting a gap approximately 3 millimeters wider than your drone...

...remain the responsibility of the pilot. 😂

🇺🇸 U.S. BUILDER / U.S. SELLER

The drone is assembled and tested here in the United States.

If you have questions before or after purchasing:

Message me directly through .

You\'re talking to the person who actually built the drone.

No overseas support chain.

No generic copy-and-paste response.

No:

“Dear customer, please kindly send video.”

Just contact me and I\'ll do my best to help.

THE SHORT VERSION

I\'ve been flying and crashing FPV drones for more than 5 years.

I\'ve broken enough frames to understand what usually fails.

FPV parts have gotten expensive.

So I started building quads with durability and reasonable cost in mind.

You get:

A new 5-inch analog FPV drone.

Built and tested in the USA.

Durability-focused construction.

8 extra props.

Seller support.

Seller warranty.

And all you need to finish your setup is:

FPV goggles + a compatible radio controller.

Then go fly.

🌳 FINAL WARNING

The drone may be tougher.

The tree is still probably tougher.

Choose your gaps wisely. 😎