When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New Crank Case Splitter Separator and Crank Puller Installer Tool Dirt Bike ATVItem Description Crank Puller & Installer Tool，Heavy-duty steel construction.
Crankcase splitter makes disassembling the crankcase simple by allowing you to safely push the crank assembly right out of the case halves.
Crankcase splitter & Installer tools makes installing motorcycle and ATV crankshafts much easier and more precise.
Safely and easily pulls crank assembly into crank puller motorcycle. Includes both male and female M10 x 1.25mm and M12 x 1.25mm adapters to attach to crank assembly.
Will not work on: YMH Raptor 660, Kawasaki Tecate 250, KTM 125/144/150.
HOW TOOPERATE
STEP 1: Place center of splitter/Separator over exposed crank end. Back out threaded shaft until the splitter sits over crank and arms are parallel and equal distance from caseSTEP 2: Using supplied 6mm or 8mm bolts, attach splitter arms evenly spaced around the crank and attach arms to the crankcase. (If you only need two arms, please separate evenly.)NB: It is important that the splitter is properly aligned with the crank and the arms are parallel with the case. Make sure all bolts are removed from the crankcasesSTEP 3:Using a 17mm socket or wrench, carefully tighten threaded shaft until case clears crank.STEP 4: Disassemble tool from crankcase.SpecificationsCondition:100% Brand New
Warranty: 90 DayFree Return:30 DayColor: BlackType: Crankcase Splitter
Material: Steel Package Included1 x Crankcase Splitter Separator Tool Set
3 x 6mm mounting bolts
3 x 8mm mounting bolts As pictures show
FAQ:
I purchased by mistake, how do I cancel the order?
Please contact us ASAP. If the item has not been shipped out we can cancel the order for you. If the item was shipped out you can refuse the package and wait for the item to return to us.
I received your item but it does not fit or is defective
Please contact us so we can assist you on the matter.
Buy with confidence
Our quality is based on meeting the requirements of the manufacturer and improvement them in design problems manufacture.
NOTE:(1)It would be highly appreciated if you might contact us first once you have any problems concerning the items. And you can expect all the issues would be resolved ASAP!(2)Please let us know before you send us the neutral/negative response that wont help to finish the issues. And I will definitely try my best to provide the best solutions which would meet our satisfactory!(3)According to the distance of the receipt address items would be sent from CA or NJ(4)This product does not include an installation manual
