When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
NEW AFTERMARKET Engine Block, 350 Chevy Small Block, Class 35 Germany Cast Iron, 4-Bolt 350 Mains, 4.000 in. Unfinished Bore Diameter, 1-Piece Rear Main Seal.THIS BLOCK IS A WET BLOCK NOT A SIAMESE.
THIS IS A FREIGHT SHIPPMENT ONLY AND WILL NEED TO GO TO A BUSINESS WITH A FORKLIFT OR A LOADING DOCK. WE ALSO WILL SHIP TO A FREIGHT HUB FOR CUSTOMER PICKUP.
( WE WILL NOT SHIP TO A RESIDENCE )
ALLOW 3 BUSINESS DAYS FOR HANDLING TIME.
(WILL ONLY SHIP TO A BUSINESS ADDRESS WITH FORKLIFT.)
(WILL NOT SHIP TO A RESIDENTIAL NEIGHBORHOOD AT ALL.)
Notes:Uses 1986 and up stock style 1 pc oil pan and passenger side dipstick. Use Durabond GMP-8 cam bearings or equivalent. Block bores are 3.990 to 4.002 in. undersized to allow for proper honing of piston to wall clearance. ALL MOTOR MOUNT HOLES WILL BE DRILLED.THIS BLOCK IS A WET BLOCK NOT A SIAMESE.
BLOCK WILL NEED* PICTURES OF THIS BLOCK IS A GENARL PICTURE FOR THE LISTINGS AND MAY NOT BE WHAT YOU GET.* BLOCK WILL NEED ALL HOLES DRILLED AND TAPPED AS NEEDED.*BLOCK MAINS WILL NEED TO BE LINE HONE TO FINISHED SIZE.*ALLCYLINDER BORES WILL NEED TO SIZE.*STARTER IS FOR OFFSET PATTERN ONLY, IF YOU NEED STRAIGHT PATTERN YOU WILL NEED TO DRILL THE BOSS THAT IS THERE.*FUEL PUMP WILL NEED TO BE DRILLED.*MUST USE DURABOND CAM BEARING PART NUMBER GMP-8.
Block Specs:All specs in inches unless otherwise noted
DescriptionSpecBlock materialIron Alloy Class 35Block weight181-194 lbs based on bore sizeBore spacing
Cam locationStock positionLubrication systemPriority mainBore size may from vary3.995 to 4.002Maximum bore size4.060Deck height9.00Deck thickness0.600Cylinder head boltholesBlindMain journal size350: 2.4485Main cap bolts7/16 inner, 3/8 outerMain cap materialNodular ironMin. cylinder wall thickness at 4.060Lifter bore size8.437 +/- 0.0003Cam bearing bore size2.000 +/- 0.001Machined for OEM hyd. roller liftersYesCam retainer plateYesClearance for 3.750-inch strokeYesOil pan railsSolid (no water jackets)Starter motor boltholesDrilled and tapped for OFFSET STARTER PATTERNMechanical fuel pump provisionNODipstick locationPassenger side
