When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If any of you are like me, you are never satisfied and will end up trying various j-arms for your PVS14, so I have created the perfect case for you! The fitment of the insert is designed to house the PVS-14 unit with your j-arm of choice already attached. When ordering, you can pick the sleeve designed for your specific j-arm. I typically popped my unit with the arm off of my helmet each time I was done, so it was necessary to make a design that didn\'t require removal of the j-arm each time.This case features a padded and removable TPU sleeve to hold the unit inside the case. Also, designed in is 2 slots for a AA batteries, as well as spot to keep a small microfiber cloth in. The hinge is removable in case the lid needs to removed for any reason. The top cover features a TPU pad to give the PVS-14 eyepiece something soft to rest against. There are top TPU pads for various configurations as follows: no accessories, IRIS on objective, sacrificial lens on objective. sacrificial lens + eyepiece fully extended.Designed with a great finish and heat resistance with PETG-CF for the case. Pads and inner sleeve are TPU-95A so your unit has something more soft to absorb any impacts if the case is dropped.Included with the product:
- Case (Top/Bottom Section)
- Installed Hinge Pin and Cotter
- TPU Sleeve (type selected by you)
- TPU Top Pad (4 size combinations)
- Extra Cotter and Hinge Pin
THESE ARE MADE TO ORDER DUE TO THE DIFFERENT OPTIONS AVAILABLE. EXPECT A COUPLE DAYS FOR ME TO SHIP THESE OUT.* These products are 3D printed, with industry leading printers with properly calibrated, dried and tested filaments. There may be small imperfections due to the printing process, but I will not send these units if they are not up to my standards. Anything that doesn\'t pass my inspection gets saved for blem sale down the road. I promise that you will be surprised with how well the quality is. If not, let me know, and I will make it right for you. *
PVS-14 MultiCaseIf any of you are like me, you are never satisfied and will end up trying various j-arms for your PVS14, so I have created the perfect case for you! The fitment of the insert is designed to house the PVS-14 unit with your j-arm of choice already attached. When ordering, you can pick the sleeve designed for your specific j-arm. I typically popped my unit with the arm off of my helmet each time I was done, so it was necessary to make a design that didn\'t require removal of the j-arm each time.This case features a padded and removable TPU sleeve to hold the unit inside the case. Also, designed in is 2 slots for a AA batteries, as well as spot to keep a small microfiber cloth in. The hinge is removable in case the lid needs to removed for any reason. The top cover features a TPU pad to give the PVS-14 eyepiece something soft to rest against. There are top TPU pads for various configurations as follows: no accessories, IRIS on objective, sacrificial lens on objective. sacrificial lens + eyepiece fully extended.Designed with a great finish and heat resistance with PETG-CF for the case. Pads and inner sleeve are TPU-95A so your unit has something more soft to absorb any impacts if the case is dropped.Included with the product:Case (Top/Bottom Section)Installed Hinge Pin and CotterTPU Sleeve (type selected by you)TPU Top Pad (4 size combinations)Extra Cotter and Hinge PinTHESE ARE MADE TO ORDER DUE TO THE DIFFERENT OPTIONS AVAILABLE. EXPECT A COUPLE DAYS FOR ME TO SHIP THESE OUT.* These products are 3D printed, with industry leading printers with properly calibrated, dried and tested filaments. There may be small imperfections due to the printing process, but I will not send these units if they are not up to my standards. Anything that doesn\'t pass my inspection gets saved for blem sale down the road. I promise that you will be surprised with how well the quality is. If not, let me know, and I will make it right for you. * PVS-14 MultiCase If any of you are like me, you are never satisfied and will end up trying various j-arms for your PVS14, so I have created the perfect case for you! The fitment of the insert is designed to house the PVS-14 unit with your j-arm of choice already attached. When ordering, you can pick the sleeve designed for your specific j-arm. I typically popped my unit with the arm off of my helmet each time I was done, so it was necessary to make a design that didn\'t require removal of the j-arm each time.This case features a padded and removable TPU sleeve to hold the unit inside the case. Also, designed in is 2 slots for a AA batteries, as well as spot to keep a small microfiber cloth in. The hinge is removable in case the lid needs to removed for any reason. The top cover features a TPU pad to give the PVS-14 eyepiece something soft to rest against. There are top TPU pads for various configurations as follows: no accessories, IRIS on objective, sacrificial lens on objective. sacrificial lens + eyepiece fully extended.Designed with a great finish and heat resistance with PETG-CF for the case. Pads and inner sleeve are TPU-95A so your unit has something more soft to absorb any impacts if the case is dropped.Included with the product:
- Case (Top/Bottom Section)
- Installed Hinge Pin and Cotter
- TPU Sleeve (type selected by you)
- TPU Top Pad (4 size combinations)
- Extra Cotter and Hinge Pin
THESE ARE MADE TO ORDER DUE TO THE DIFFERENT OPTIONS AVAILABLE. EXPECT A COUPLE DAYS FOR ME TO SHIP THESE OUT.* These products are 3D printed, with industry leading printers with properly calibrated, dried and tested filaments. There may be small imperfections due to the printing process, but I will not send these units if they are not up to my standards. Anything that doesn\'t pass my inspection gets saved for blem sale down the road. I promise that you will be surprised with how well the quality is. If not, let me know, and I will make it right for you. *
× × × × × × × × × ×
Shipping info
Click the Shipping & Payments tab above the listing description for more info
FREE Shipping
Click the Shipping & Payments tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYMENT
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.
Thank you for shopping with us on !
Additional Information
No additional information at this time
Ask seller a question
You might also like PVS-14 Case (No J-arm) Night Vision Bino Case (Katana) Polaris Locking Funnel Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© H3D Products
Shipping & Payments
Shipping is FREE for this item
Payment
Accepted Payment Methods
Immediate payment is required upon selecting \"Buy It Now\" or upon checking out through the cart.
We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay.
We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus).
The applicable amount of sales tax charged to an order will be calculated based on the shipment destination\'s state and local sales tax laws.
Thank you for shopping with us on !
Returns
Returns are accepted
Items must be returned within 30 days of the sale ending
Buyer will pay for return shipping.
integration by
