When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Paasche DH550R 1/5 HP Airbrush Compressor w/ TG-3F Gravity FeedAirbrush Set
The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high-end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual.
Features:
· Airbrush Made In The USA
· Quality Precision materials for fine detail work
· Highly polished & hardened stainless steel needles for long life and reduced clogging
· Solvent proof needle packing allow spraying of water & solvent based paints
· Chrome plated body
Specs:
Part Number: TG-3AS
Type: Double Action, internal mix, gravity feed
Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm)
Fluid Packing: PTFE - can spray solvent or water-based fluids
Air Volume: 20 PSI @ .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: ¼-20 Paasche thread – adapters available
Bottle size: N/A
Spray Pattern: Hairline to 1-1/2 - with fan aircap up to 3
Finish: Chrome plated body
The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 30 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
· 1/5 HP piston compressor
· Regulator & moisture trap
· Dual airbrush holder
· Delivers 1-30 PSI depending on airbrush being used
· Standard Paasche 1/4NPT hose fitting
· 1/8 BPS hose adaptor for competitor hoses
· Auto shutoff feature
· Carrying handle
· Quiet: noise level is 47 Db’s
PayPal & Major Credit Cards
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
Shipping
Tracking number will be on the invoice which will be e-mailed.
The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high-end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3F Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features: · Airbrush Made In The USA · Quality Precision materials for fine detail work · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: TG-3F Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE - can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 - with fan aircap up to 3 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holder · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s Paasche DA300R 1/5 HP Airbrush Compressor w/ TG-3F Gravity FeedAirbrush Set
The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high-end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following.
TG-3F Includes:
TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual.
Features:
· Airbrush Made In The USA
· Quality Precision materials for fine detail work
· Highly polished & hardened stainless steel needles for long life and reduced clogging
· Solvent proof needle packing allow spraying of water & solvent based paints
· Chrome plated body
Specs:
Part Number: TG-3F
Type: Double Action, internal mix, gravity feed
Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm)
Fluid Packing: PTFE - can spray solvent or water-based fluids
Air Volume: 20 PSI @ .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: ¼-20 Paasche thread – adapters available
Bottle size: N/A
Spray Pattern: Hairline to 1-1/2 - with fan aircap up to 3
Finish: Chrome plated body
The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
· 1/5 HP piston compressor
· Regulator & moisture trap
· Dual airbrush holder
· Delivers 1-35 PSI depending on airbrush being used
· Standard Paasche 1/4NPT hose fitting
· 1/8 BPS hose adaptor for competitor hoses
· Auto shutoff feature
· Carrying handle
· Quiet: noise level is 47 Db’s
PayPal & Major Credit Cards
Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
Shipping
Tracking number will be on the invoice which will be e-mailed.
The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high-end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following.
TG-3F Includes:
TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual.
Features:
· Airbrush Made In The USA
· Quality Precision materials for fine detail work
· Highly polished & hardened stainless steel needles for long life and reduced clogging
· Solvent proof needle packing allow spraying of water & solvent based paints
· Chrome plated body
Specs:
Part Number: TG-3F
Type: Double Action, internal mix, gravity feed
Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm)
Fluid Packing: PTFE - can spray solvent or water-based fluids
Air Volume: 20 PSI @ .5 CFM
Air Pressure: 20-75 PSI
Air Inlet: ¼-20 Paasche thread – adapters available
Bottle size: N/A
Spray Pattern: Hairline to 1-1/2 - with fan aircap up to 3
Finish: Chrome plated body
The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses.
The compressor features include:
· 1/5 HP piston compressor
· Regulator & moisture trap
· Dual airbrush holder
· Delivers 1-35 PSI depending on airbrush being used
· Standard Paasche 1/4NPT hose fitting
· 1/8 BPS hose adaptor for competitor hoses
· Auto shutoff feature
· Carrying handle
· Quiet: noise level is 47 Db’s
